![]() |
Register or Log In To remove these advertisements. |
|
|
![]() |
|
Thread Tools | Display Modes |
|
![]() |
#1 |
Too many projects!!!
Join Date: Jul 2000
Location: Jacksonville, Florida
Posts: 508
|
Current project status....
Well I haven't posted anything here in a while in regards to my truck project...it started life as a 71 C10 that I drove for several years, and then decided to start a restoration..well the cab and frame were really bad on it. So I decided to start with something better. Sold most of my parts to my neighbor who was building a 72.
After almost 3 years of not really looking...I found this 70 SWB cab and chassis setup with 350 motor and TH350 tranny. Cost me $1200, but the cab is in good shape, and down here in Florida, that's hard to find. That was about a year ago... Then about 4 weeks ago, I found this 68 to complete the 70. The PO really pretty much made the cab and frame useless for me, so I got the sheet metal from it (which is all pretty solid) and it also had dropped spindles, disk brakes conversion on the front, new bumpers..and an almost perfect original tailgate, plus some other goodies.....best of all, this one only cost me $500 ![]()
__________________
Sean ![]() 1995 Buick Roadmaster Sedan 2004 Chevy Trailblazer 5.3L V8 1963 Chevy Biscayne 4D Sedan 1971 Chevy C10 (now have 70 cab & frame) 1968 Chevy C10 (parts for the 70) 1991 Oldsmobile Custom Cruiser (Chevy 355 motor) 1937 Pontiac 8 4D Touring Sedan (in pieces) Jacksonville, Florida Last edited by seanu; 06-01-2007 at 03:31 PM. |
![]() |
![]() |
![]() |
#2 |
RIP Mr Ron
![]() Join Date: Dec 2005
Location: Big Sandy, Tn. 38221
Posts: 8,166
|
Re: Current project status....
Good job collecting parts. Always good to have a few extra parts laying around in case you need them or can swap them for something you can use. Keep us posted and good luck with your build.
__________________
Ron (Mr Round Tuit) ![]() Be kinder than necessary, for everyone you meet is fighting some kind of battle TN Message Forum TN Facebook Group SETN Truck Show My Photobucket |
![]() |
![]() |
![]() |
#3 |
Too many projects!!!
Join Date: Jul 2000
Location: Jacksonville, Florida
Posts: 508
|
Re: Current project status....
Here are some more photos...the 68 was originally a LWB, and the PO cut it down into a SWB...as you can see by the photos...the bed was not shortend properly, so when I placed it on my 70 SWB frame, it didn't quite line up...but it will do for now (till I can either find a true SWB bed, or get the money to build one with new panels)
If you can see it in the second photo...the PO also cut a very large hole in the floor and firewall of the cab and did some creative modifications to the frame.
__________________
Sean ![]() 1995 Buick Roadmaster Sedan 2004 Chevy Trailblazer 5.3L V8 1963 Chevy Biscayne 4D Sedan 1971 Chevy C10 (now have 70 cab & frame) 1968 Chevy C10 (parts for the 70) 1991 Oldsmobile Custom Cruiser (Chevy 355 motor) 1937 Pontiac 8 4D Touring Sedan (in pieces) Jacksonville, Florida Last edited by seanu; 06-01-2007 at 03:31 PM. |
![]() |
![]() |
![]() |
Bookmarks |
|
|