![]() |
|
![]() |
#1 |
Registered User
Join Date: Jun 2006
Location: san jose california
Posts: 109
|
project body drop
just finished stripingmy frame to get it ready for all the cutting and welding on my 72, but i want to get more info from people that have walked this road. so i know i have to notch the back and z the frame or section the c-member,whats beter? besides that what else do i cut, remove, section,etc. pictures is always a plus. please school me
|
![]() |
![]() |
![]() |
#2 |
Senior Member
Join Date: Nov 2005
Location: northwestern wi
Posts: 2,111
|
Re: project body drop
check out project slow build thread
__________________
common sense isn't so common anymore |
![]() |
![]() |
![]() |
#3 |
Outlandish Trends - FL
Join Date: Jul 2005
Location: Orlando
Posts: 1,396
|
Re: project body drop
Check the suspension drop and look for Camaro_Thunder's thread on his truck. He's BD'd.
__________________
-Bret 67 short-fleet sold! |
![]() |
![]() |
![]() |
#4 |
Registered User
![]() Join Date: Feb 2004
Location: brownfield texas (west texas)
Posts: 1,936
|
Re: project body drop
well i don't know what you got, but i can tell you i body droped mine 3" my self and it is very easy if you have a bed with a wood floor. i did not z my frame. all i had to do was cut the floor out of the cab and raise it up about 2" just the part that goes over the frame rails. I had to move all the cab mounts down on the fram the rear ones a full 3" and the front ones id have to mesure becuas i have forgotten. I did have some custom front cab supports made so that i would not have to move the front ones down as far. they cost me nothing since my brother inlaw works at a fab shop. they would be easy to reproduce. the bed is just a matter of takeing out the wood floor and flipping the bed supports over to the top. and the only cutting of the frame is the front 6in or so. i cut it right before the core support brackets and moved it down 3 in so that the front would be down. doing this will lower down the front body panles with out takeing any strength out of the frame. i can get you some pics but i won't be home till july 10th so youll have to wait. with that and a suspension drop my rockers are about 6in off the ground and the tops of the tires are just covered thats with 15s i could probably tuck and in or 2 with 20s. it basicly looks like a bagged truck aired out but it rides there comfortable...
![]()
__________________
The Ghost 67 short wide full custom. 550 hp LSX, 4l80E, narrowed 9". Body dropped w/air ride! ........................ ___ .........________//__{\_____ ,,,,,,,/__(⊙)___//___/__(O)_/ @disciple2.rc 💪instagram💪 LED TAILS |
![]() |
![]() |
![]() |
Bookmarks |
|
|