parting out 68 LWB - The 1947 - Present Chevrolet & GMC Truck Message Board Network

68 short step · 07-29-2006, 11:55 PM

front clip----- hood, right fender, right inner fender, left fender, left inner fender, radiator core support, front grill with all the (faded) chrome, parking lights, headlights, and wiper cowl.....the right fender has big dent just behind the tire, the inner fender is rusted through where connects to core support, and has normal rust under bat tray.....
for 350$$

also have a A/C cab with a non-cut dash and orignal 7 hole (no tach) dash. 3 on the columb ( no shift arm tho) steering columb. the cab need outer rockers (inner too, more than likely) and dr side floor.. pass side can mabey be used. the cab corners are good.. title included 200$$$

and complete rolling frame 6 lug with 3 directional wheels
200$$

and pass side door, good glass
little dings here and there 40$$

also have all the side trim.10$$

or complete for 700$$$
also if any of you need something just let me know and ill sell it ( if it doesnt sell complete)

68 short step · 07-29-2006, 11:55 PM

68 short step · 07-29-2006, 11:56 PM

on the big stuff, local pick up please.

chevdanbarnett · 07-30-2006, 12:11 AM

even the innerfennders

dirtball · 07-30-2006, 01:05 AM

I'm interested in the side trim if it isn't beat too bad. Have any pics?Also interested in the grill loop trim if you would separate from the rest of the front end.
Please let me know, Brett

68 short step · 07-31-2006, 11:08 PM

Quote:

Originally Posted by dirtball

I'm interested in the side trim if it isn't beat too bad. Have any pics?Also interested in the grill loop trim if you would separate from the rest of the front end.
Please let me know, Brett

side trim

68 short step · 07-30-2006, 08:28 AM

Quote:

Originally Posted by chevdanbarnett

even the innerfennders

i would prefer, but if doesnt sell ( front clip ) in a day or 2 i'll part it..

Quote:

Originally Posted by Huskerboy2

If you don't sell it complete, I'd be interested in the hood and the A/C dash, plus any A/C stuff left on it. Is the hood straight and rust free?? I could pick it up in Dallas. Let me know

yes hood is streight with little surface rust (seen in pics)

Quote:

Originally Posted by dirtball

I'm interested in the side trim if it isn't beat too bad. Have any pics?Also interested in the grill loop trim if you would separate from the rest of the front end.
Please let me know, Brett

ill get pics of trim today... again if it doesnt sell ( front clip ) in couple of days i'll part them... i may have some tho.... i'll check and snap a few shots..

ratrod67 · 07-30-2006, 09:53 AM

Do you have a seat?

68 short step · 07-30-2006, 02:25 PM

Quote:

Originally Posted by ratrod67

Do you have a seat?

sorry no seat

Huskerboy2 · 07-30-2006, 01:03 AM

If you don't sell it complete, I'd be interested in the hood and the A/C dash, plus any A/C stuff left on it. Is the hood straight and rust free?? I could pick it up in Dallas. Let me know.

jsbgump · 07-30-2006, 07:08 AM

I would be interested in tge hood

Geezer · 07-30-2006, 08:21 AM

Second on the side trim

Huskerboy2 · 07-30-2006, 01:53 PM

Let me know. I would definitely take the hood, A/C dash, any A/C stuff left on it. I'll be in Dallas in a couple of weeks.

68 short step · 07-30-2006, 02:26 PM

Quote:

Originally Posted by Huskerboy2

Let me know. I would definitely take the hood, A/C dash, any A/C stuff left on it. I'll be in Dallas in a couple of weeks.

will do... im actually in greenville 50 east of dallas

68 short step · 07-31-2006, 08:20 AM

tttt

*72lb4x4* · 07-31-2006, 03:25 PM

How much is the instrument panel, and the dash wiring harness if its not too cut up?

68 short step · 07-31-2006, 07:33 PM

panel + wiring ( i'll check to see condition) 35$$
+ ride

also if noone is instrested in it as a whole, front clip, or cab... ill start parting it tomorrow

llama · 07-31-2006, 09:53 PM

Is the rod through the firewall for the brakes have a eyelet on both ends? If so how much? thanks jeff

68 short step · 07-31-2006, 11:09 PM

Quote:

Originally Posted by llama

Is the rod through the firewall for the brakes have a eyelet on both ends? If so how much? thanks jeff

no, just on the inside

dirtball · 07-31-2006, 11:54 PM

I'm in for the side trim pieces. Do you have the cab corners pieces too? Let me know on the grill trim, I'm still interested in those.
Brett

68 short step · 08-01-2006, 06:28 AM

Quote:

Originally Posted by dirtball

I'm in for the side trim pieces. Do you have the cab corners pieces too? Let me know on the grill trim, I'm still interested in those.
Brett

thats all the side moldings i have... i'll get pics of the grill loops i have today after work..

68 short step · 08-01-2006, 08:44 PM

Quote:

Originally Posted by dirtball

I'm in for the side trim pieces. Do you have the cab corners pieces too? Let me know on the grill trim, I'm still interested in those.
Brett

ok heres some grill loop pics
the ones on the truck ill take 20$$ for them they are kinda dented in a few spots, but the ones in my attic ill take 30 for them.. they are in better shape, altho they have a few dents too...

*72lb4x4* · 08-01-2006, 01:39 PM

I'll take the guage cluster and dash harness if still available. PM sent...

bean · 08-01-2006, 03:49 PM

If you're interested in breaking up the front clip I'd take the inner fenders.

68 short step · 08-01-2006, 08:49 PM

Quote:

Originally Posted by bean

If you're interested in breaking up the front clip I'd take the inner fenders.

ok.... im to the parting out point.... the pass fender is rotted all the way through where it connects to the rad support, the dr side appers to be good.. ill take 40$ for the pair....or 10$ for pass side and 30$ for dr side

07-29-2006, 11:55 PM	#1
68 short step Senior Member Join Date: Aug 2005 Location: tulsa OK Posts: 3,070	parting out 68 LWB front clip----- hood, right fender, right inner fender, left fender, left inner fender, radiator core support, front grill with all the (faded) chrome, parking lights, headlights, and wiper cowl.....the right fender has big dent just behind the tire, the inner fender is rusted through where connects to core support, and has normal rust under bat tray..... for 350$$ also have a A/C cab with a non-cut dash and orignal 7 hole (no tach) dash. 3 on the columb ( no shift arm tho) steering columb. the cab need outer rockers (inner too, more than likely) and dr side floor.. pass side can mabey be used. the cab corners are good.. title included 200$$$ and complete rolling frame 6 lug with 3 directional wheels 200$$ and pass side door, good glass little dings here and there 40$$ also have all the side trim.10$$ or complete for 700$$$ also if any of you need something just let me know and ill sell it ( if it doesnt sell complete) Last edited by 68 short step; 07-29-2006 at 11:57 PM.

07-29-2006, 11:55 PM	#2
68 short step Senior Member Join Date: Aug 2005 Location: tulsa OK Posts: 3,070	Re: parting out 68 LWB

07-29-2006, 11:56 PM	#3
68 short step Senior Member Join Date: Aug 2005 Location: tulsa OK Posts: 3,070	Re: parting out 68 LWB on the big stuff, local pick up please.

07-30-2006, 12:11 AM	#4
chevdanbarnett Senior Member Join Date: Apr 2006 Location: ohio medina Posts: 451	Re: parting out 68 LWB even the innerfennders

07-30-2006, 01:05 AM	#5
dirtball Registered User Join Date: May 2006 Location: Colorado Posts: 412	Re: parting out 68 LWB I'm interested in the side trim if it isn't beat too bad. Have any pics?Also interested in the grill loop trim if you would separate from the rest of the front end. Please let me know, Brett

07-30-2006, 09:53 AM	#8
ratrod67 Registered User Join Date: Sep 2002 Location: DFW Texas Posts: 2,270	Re: parting out 68 LWB Do you have a seat?

07-30-2006, 01:03 AM	#10
Huskerboy2 Senior Member Join Date: Feb 2001 Location: Austin, Texas, USA Posts: 1,628	Re: parting out 68 LWB If you don't sell it complete, I'd be interested in the hood and the A/C dash, plus any A/C stuff left on it. Is the hood straight and rust free?? I could pick it up in Dallas. Let me know. __________________ '72 Chevy Blazer

07-30-2006, 07:08 AM	#11
jsbgump Gone Fishing Join Date: Aug 2005 Location: Fort Worth, Texas 76135 Posts: 12,361	Re: parting out 68 LWB I would be interested in tge hood __________________ 68 Chevy Short Fleetside LSX Swap Under Way 3.73 posi 2.5/4 drop Frame of resto has been started 2022 Hyundai Tucson Limited 2019 Chevy Traverse Redline Edition Wifes Ride Build Thread http://67-72chevytrucks.com/vboard/s...=1#post3483616

07-30-2006, 08:21 AM	#12
Geezer Registered User Join Date: May 2005 Location: Spring Branch Texas Posts: 177	Re: parting out 68 LWB Second on the side trim __________________ If you can't drive it park it! If you can't park it milk it!

07-30-2006, 01:53 PM	#13
Huskerboy2 Senior Member Join Date: Feb 2001 Location: Austin, Texas, USA Posts: 1,628	Re: parting out 68 LWB Let me know. I would definitely take the hood, A/C dash, any A/C stuff left on it. I'll be in Dallas in a couple of weeks. __________________ '72 Chevy Blazer

07-31-2006, 08:20 AM	#15
68 short step Senior Member Join Date: Aug 2005 Location: tulsa OK Posts: 3,070	Re: parting out 68 LWB tttt

07-31-2006, 03:25 PM	#16
72lb4x4 Account Suspended Join Date: Jul 2006 Location: DFW Posts: 1,427	Re: parting out 68 LWB How much is the instrument panel, and the dash wiring harness if its not too cut up?

07-31-2006, 07:33 PM	#17
68 short step Senior Member Join Date: Aug 2005 Location: tulsa OK Posts: 3,070	Re: parting out 68 LWB panel + wiring ( i'll check to see condition) 35$$ + ride also if noone is instrested in it as a whole, front clip, or cab... ill start parting it tomorrow

07-31-2006, 09:53 PM	#18
llama Senior Member Join Date: Jul 2002 Location: northern IL. Posts: 263	Re: parting out 68 LWB Is the rod through the firewall for the brakes have a eyelet on both ends? If so how much? thanks jeff

07-31-2006, 11:54 PM	#20
dirtball Registered User Join Date: May 2006 Location: Colorado Posts: 412	Re: parting out 68 LWB I'm in for the side trim pieces. Do you have the cab corners pieces too? Let me know on the grill trim, I'm still interested in those. Brett



Register or Log In To remove these advertisements.

08-01-2006, 01:39 PM	#23
72lb4x4 Account Suspended Join Date: Jul 2006 Location: DFW Posts: 1,427	Re: parting out 68 LWB I'll take the guage cluster and dash harness if still available. PM sent...

08-01-2006, 03:49 PM	#24
bean Registered User Join Date: Jun 2002 Location: Fort Worth, TX Posts: 919	Re: parting out 68 LWB If you're interested in breaking up the front clip I'd take the inner fenders.

Register or Log In To remove these advertisements.