Which cancel cam plunger do I need? - The 1947 - Present Chevrolet & GMC Truck Message Board Network

**Yukon Jack** · 08-10-2006, 10:13 AM

I am putting a van tilt column in my 69 K20 and will likely be using a Grant steering wheel with it.

The cancel cam on the van tilt is missing the plunger and I know there are at least two styles. One is just a metal plunger and the other is a plastic piece, that goes where the metal plunger would be, with a spring on the plastic end then a wire lead that goes out of the plastic piece.

Any idea which plunger I should be using?

Here's a couple pics of the van tilt's cancel cam.

Any suggestions on plunger style I should use or if I should be using a different style cancel cam? As you can see I don't know anything about them

Longhorn Man · 08-10-2006, 10:40 AM

you have the right cancel cam. With a grant GT, you'll want the one with a wire.

**Yukon Jack** · 08-10-2006, 11:10 AM

Thanks Andy.

bryanw1968 · 08-10-2006, 12:24 PM

Man that's a nice truck!

08-10-2006, 10:13 AM	#1
Yukon Jack Post Whore Join Date: Feb 2000 Location: Rose Hill, KS, USA Posts: 12,686	Which cancel cam plunger do I need? I am putting a van tilt column in my 69 K20 and will likely be using a Grant steering wheel with it. The cancel cam on the van tilt is missing the plunger and I know there are at least two styles. One is just a metal plunger and the other is a plastic piece, that goes where the metal plunger would be, with a spring on the plastic end then a wire lead that goes out of the plastic piece. Any idea which plunger I should be using? Here's a couple pics of the van tilt's cancel cam. Any suggestions on plunger style I should use or if I should be using a different style cancel cam? As you can see I don't know anything about them __________________ 1970 Blazer with a 400 sbc and 4" lift 1980 Pontiac Trans Am, 455 Oldsmobile 2012 Kawasaki Concours 14

08-10-2006, 10:40 AM	#2
Longhorn Man its all about the +6 inches Join Date: Jan 2001 Location: Hilliard Ohio Posts: 2,690	Re: Which cancel cam plunger do I need? you have the right cancel cam. With a grant GT, you'll want the one with a wire.

08-10-2006, 11:10 AM	#3
Yukon Jack Post Whore Join Date: Feb 2000 Location: Rose Hill, KS, USA Posts: 12,686	Re: Which cancel cam plunger do I need? Thanks Andy. __________________ 1970 Blazer with a 400 sbc and 4" lift 1980 Pontiac Trans Am, 455 Oldsmobile 2012 Kawasaki Concours 14

08-10-2006, 12:24 PM	#4
bryanw1968 Senior Member Join Date: Jul 2006 Location: Leander, Texas Posts: 850	Re: Which cancel cam plunger do I need? Man that's a nice truck!



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.