Parting 74 SWB chevy Truck - The 1947 - Present Chevrolet & GMC Truck Message Board Network

jtmiller92 · 08-10-2006, 11:56 AM

Not many good parts left on the truck but if there is anything you may need off of it let me know cause its gouing to the crusher in a day ot two. It has a 350 4 bolt Main engine but may be locked up with a 400 Turbo Trans, rear slider window, power steering, heather box etc. Body and interior is pretty much shot. Has dual tanks on it with the switch. I can get pics of anything, a tree fell on the cab at one point. Let me know........jt

jtmiller92 · 08-10-2006, 04:08 PM

OK, Update:

Engine is not locked up. Its a 350 4 bolt engine, has been sitting for a few years. And as the famous saying goes "it ran fine when it was parked". It turns over fine.

400 Turbo Trans and again "it ran fine when it was parked".

The truck is a 74 SWB, originally a Big Block truck. My dad took the engine out to put in his 84 Dually. So the engine from his dually went back into the truck.

Has a rear slider window. Some Misc Trim parts that I will try to post pics of later tonight or tomorrow.........jt

79chevy8708 · 08-11-2006, 02:24 PM

so how much u want for the trans

jtmiller92 · 08-11-2006, 02:28 PM

Asking $200 for the trans.

**ScottH** · 08-11-2006, 07:33 PM

Are the door panels available? If so could you provide pics and price?

Thanks.

Scott

jtmiller92 · 08-11-2006, 07:49 PM

Quote:

Originally Posted by ScottH

Are the door panels available? If so could you provide pics and price?

Thanks.

Scott

Yeah, I will see what I can do........tj

jtmiller92 · 08-14-2006, 02:49 PM

Quote:

Originally Posted by ScottH

Are the door panels available? If so could you provide pics and price?

Thanks.

Scott

Here are some pics. $25 plus shipping.............jt

Nolowrider · 08-14-2006, 03:32 PM

Is the rear window in good shape? Does it have the locking mechanism? What about the top radiator support?

jtmiller92 · 08-14-2006, 04:10 PM

Quote:

Originally Posted by Nolowrider

Is the rear window in good shape? Does it have the locking mechanism? What about the top radiator support?

Window looks to be in good shape, latch is still there and works properly but its plastic. Window still slides easily. Upper radiator support is a chrome piece that needs to be cleaned up. Has a nice green film on it, sos pad would do wonders.

jtmiller92 · 08-14-2006, 04:14 PM

Here are some misc. trim parts that were laying in the bed of the truck. They look to be in good condition. Let me know if you need better pics or are interested in anything...........jt

79chevy8708 · 08-12-2006, 03:57 PM

can u ship the trans how much to 76513

jtmiller92 · 08-14-2006, 02:45 PM

Quote:

Originally Posted by 79chevy8708

can u ship the trans how much to 76513

Sorry but i dont have any way to ship the trans.........jt

**ScottH** · 08-14-2006, 03:33 PM

Can you give me total with shipping to 08753?

Thanks.

jtmiller92 · 08-14-2006, 03:57 PM

Quote:

Originally Posted by ScottH

Can you give me total with shipping to 08753?

Thanks.

$40 shipped, Will include everything in the pics. Plastic looks to be in great shape, the armrest portion may need replaced but most of it should clean up well. LMK..........jt

79chevy8708 · 08-14-2006, 08:08 PM

hey i will take thos door panels let me kno so i can send out the money

jtmiller92 · 08-14-2006, 09:04 PM

Let me make sure ScottH doesnt want them first, if he doesnt I'll let you know asap...........jt

**ScottH** · 08-14-2006, 09:19 PM

PM sent, I'll take the door panels.

Thanks.

Scott

jtmiller92 · 08-14-2006, 11:14 PM

Door panels are Sold! Thanks, JT

mhicks · 08-15-2006, 09:48 AM

How about the emergency brake cable. Is it all there? How Much shipped to 76087?

**ScottH** · 08-15-2006, 09:58 AM

JT, would you have the mounting brackets for the sport mirrors shown in the last pic?

Scott

jtmiller92 · 08-15-2006, 03:13 PM

Thanks for the interest in the truck guys. Unfortunately It had to go and was dropped off at the recycler earlier today. There were very few parts worth saving on it.

E-brake cable was broken, and Scotth i did not see the brackets that went with the sport mirrors. I have your door panels off and will ship them first thing tomorrow.

I still have the 350 out of the truck, $150.00
The 400 Turbo Trans $150
HEI Vacuum advance Distributor $30
And the Misc Trim pieces shown in the above pics.

08-10-2006, 11:56 AM	#1
jtmiller92 Registered User Join Date: Jan 2005 Location: Nicholasville, KY 40356 Posts: 461	Parting 74 SWB chevy Truck Not many good parts left on the truck but if there is anything you may need off of it let me know cause its gouing to the crusher in a day ot two. It has a 350 4 bolt Main engine but may be locked up with a 400 Turbo Trans, rear slider window, power steering, heather box etc. Body and interior is pretty much shot. Has dual tanks on it with the switch. I can get pics of anything, a tree fell on the cab at one point. Let me know........jt __________________ 2011 Camaro 1SS LS3/6 Speed Last edited by jtmiller92; 08-10-2006 at 11:58 AM.

08-10-2006, 04:08 PM	#2
jtmiller92 Registered User Join Date: Jan 2005 Location: Nicholasville, KY 40356 Posts: 461	Re: Parting 74 SWB chevy Truck OK, Update: Engine is not locked up. Its a 350 4 bolt engine, has been sitting for a few years. And as the famous saying goes "it ran fine when it was parked". It turns over fine. 400 Turbo Trans and again "it ran fine when it was parked". The truck is a 74 SWB, originally a Big Block truck. My dad took the engine out to put in his 84 Dually. So the engine from his dually went back into the truck. Has a rear slider window. Some Misc Trim parts that I will try to post pics of later tonight or tomorrow.........jt __________________ 2011 Camaro 1SS LS3/6 Speed

08-11-2006, 02:24 PM	#3
79chevy8708 Registered User Join Date: Jul 2006 Location: Belton,Tx Posts: 23	Re: Parting 74 SWB chevy Truck so how much u want for the trans

08-11-2006, 02:28 PM	#4
jtmiller92 Registered User Join Date: Jan 2005 Location: Nicholasville, KY 40356 Posts: 461	Re: Parting 74 SWB chevy Truck Asking $200 for the trans. __________________ 2011 Camaro 1SS LS3/6 Speed

08-11-2006, 07:33 PM	#5
ScottH Senior Member Join Date: Sep 2002 Location: Hampstead, NC Posts: 8,190	Re: Parting 74 SWB chevy Truck Are the door panels available? If so could you provide pics and price? Thanks. Scott

08-14-2006, 03:32 PM	#8
Nolowrider Senior Member Join Date: Jan 2005 Location: New Orleans Posts: 1,365	Re: Parting 74 SWB chevy Truck Is the rear window in good shape? Does it have the locking mechanism? What about the top radiator support?

08-14-2006, 04:14 PM	#10
jtmiller92 Registered User Join Date: Jan 2005 Location: Nicholasville, KY 40356 Posts: 461	Re: Parting 74 SWB chevy Truck Here are some misc. trim parts that were laying in the bed of the truck. They look to be in good condition. Let me know if you need better pics or are interested in anything...........jt __________________ 2011 Camaro 1SS LS3/6 Speed

08-12-2006, 03:57 PM	#11
79chevy8708 Registered User Join Date: Jul 2006 Location: Belton,Tx Posts: 23	Re: Parting 74 SWB chevy Truck can u ship the trans how much to 76513

08-14-2006, 03:33 PM	#13
ScottH Senior Member Join Date: Sep 2002 Location: Hampstead, NC Posts: 8,190	Re: Parting 74 SWB chevy Truck Can you give me total with shipping to 08753? Thanks.

08-14-2006, 08:08 PM	#15
79chevy8708 Registered User Join Date: Jul 2006 Location: Belton,Tx Posts: 23	Re: Parting 74 SWB chevy Truck hey i will take thos door panels let me kno so i can send out the money

08-14-2006, 09:04 PM	#16
jtmiller92 Registered User Join Date: Jan 2005 Location: Nicholasville, KY 40356 Posts: 461	Re: Parting 74 SWB chevy Truck Let me make sure ScottH doesnt want them first, if he doesnt I'll let you know asap...........jt __________________ 2011 Camaro 1SS LS3/6 Speed

08-14-2006, 09:19 PM	#17
ScottH Senior Member Join Date: Sep 2002 Location: Hampstead, NC Posts: 8,190	Re: Parting 74 SWB chevy Truck PM sent, I'll take the door panels. Thanks. Scott

08-14-2006, 11:14 PM	#18
jtmiller92 Registered User Join Date: Jan 2005 Location: Nicholasville, KY 40356 Posts: 461	Re: Parting 74 SWB chevy Truck Door panels are Sold! Thanks, JT __________________ 2011 Camaro 1SS LS3/6 Speed

08-15-2006, 09:48 AM	#19
mhicks Registered User Join Date: Jan 2004 Location: Weatherford,Tx Posts: 747	Re: Parting 74 SWB chevy Truck How about the emergency brake cable. Is it all there? How Much shipped to 76087?

08-15-2006, 09:58 AM	#20
ScottH Senior Member Join Date: Sep 2002 Location: Hampstead, NC Posts: 8,190	Re: Parting 74 SWB chevy Truck JT, would you have the mounting brackets for the sport mirrors shown in the last pic? Scott



Register or Log In To remove these advertisements.

08-15-2006, 03:13 PM	#21
jtmiller92 Registered User Join Date: Jan 2005 Location: Nicholasville, KY 40356 Posts: 461	Re: Parting 74 SWB chevy Truck Thanks for the interest in the truck guys. Unfortunately It had to go and was dropped off at the recycler earlier today. There were very few parts worth saving on it. E-brake cable was broken, and Scotth i did not see the brackets that went with the sport mirrors. I have your door panels off and will ship them first thing tomorrow. I still have the 350 out of the truck, $150.00 The 400 Turbo Trans $150 HEI Vacuum advance Distributor $30 And the Misc Trim pieces shown in the above pics. __________________ 2011 Camaro 1SS LS3/6 Speed Last edited by jtmiller92; 08-15-2006 at 03:14 PM.

Register or Log In To remove these advertisements.