P.A.W. Engine Parts - The 1947 - Present Chevrolet & GMC Truck Message Board Network

WB72 · 08-09-2002, 05:15 PM

Has anyone delt with PAW to buy their engine parts?

Is their catalog worth it (I'm from Canada, it would cost $14.95)?

All comments are welcome...

Beast388 · 08-09-2002, 05:26 PM

I bought my h-beam connecting rods from PAW. The service was good as well as delivery. I have a couple of buddies who have purchased parts from them as well......no problems.

Longhorn Man · 08-09-2002, 06:11 PM

While I have never dealt with PAW, I can say that Jasper makes some d@mn good engines. We get all our rebuilt gasolin engines from them at the shop i work at. (Jasper is about 3 miles from my shop)
Everything from stock to what the h*ll was that?

MandarinSixSeven · 08-09-2002, 06:39 PM

well, im gonna sound like a fool, but what is PAW?

DeepPurple · 08-09-2002, 09:34 PM

Quote:

what is PAW?

PAW is Performance Automotive Wareouse, a mail order engine parts supplier. Think a limited Jegs or Summit.

MandarinSixSeven · 08-09-2002, 09:37 PM

ahh i see, i knew it had to be something like that

Sinister · 08-09-2002, 10:19 PM

PAW kicks a$$...
their catalog is thick as a phonebook and is full of helpful info...
their house brand parts are high quality, in particular their stainless steel valves, (Manley),
i like their cams as well...

dmec · 08-10-2002, 03:02 AM

i have used PAW parts and have been satisfied. i have found a place called northernautoparts that has the best bang for the buck. i used their engine kit on my last project and they are my choice. chevy 350 complete rebuild kit with hyperutectic pistons and your choice of crane cams for $300. check them out on the net. they have free catalogs. www.northernautoparts.com

Ed ke6bnl · 08-10-2002, 09:43 AM

Quote:

Originally posted by DeepPurple

PAW is Performance Automotive Wareouse, a mail order engine parts supplier. Think a limited Jegs or Summit.

Here in So Calif. it is more then just a mail order they do have a store in North Hollywood Calif. even at that when I have called the majority of the parts are at the warehouse the main mail order supply house about 20 miles in the north valley of the San Fernando Valley. I did over hear them saying that some of there item are sold at times below cost to compete on certain items the Jegs and Summit sell. Worth cheching prices for comparison. Ed ke6bnl

RON WOODGEARD · 08-10-2002, 11:28 AM

I have purchased a lot of stuff in the past from them, they have stuff like chrome bolts, You never see just chromed bolts at SUMMIT or JEGS.
I almost forgot about them, I haven't ordered anything in about 7 or 8 years from them. I'll have to look their number up and order another catalog.

RON

Longhorn Man · 08-10-2002, 05:25 PM

Quote:

Originally posted by RON WOODGEARD
You never see just chromed bolts at SUMMIT or JEGS.

You find them when you can just walk into the store.

I live less than 5 miles from the west side Jegs in Columbus.

RON WOODGEARD · 08-10-2002, 05:58 PM

Well ANDY,

I don't live in COLUMBUS, I have a bundle of relatives that do but I've never met them either. never been there. Heck, I guess there is even a road there named after ME. hehehe One of my relatives used to own all of the ASH CAVE property. and I guess if you really want to find any WOODGEARD's there you just call the "JAIL'' I do know there is some lost relative that's a HIGHWAY PATROL in that area. But the rest are supposed to be kind of a roudy bunch, (I guess that's where I got it from) hehehe
They live in and around COLUMBUS..some are hill people.

SAY HI FOR ME IF YOU EVER RUN ACROSS ANY.
RON

RON IN PAHRUMP NEVADA, HOME OF ART BELL AND AREA 51.

08-09-2002, 05:15 PM	#1
WB72 Before and After Join Date: Feb 2000 Location: Leduc, Alberta CANADA Posts: 632	P.A.W. Engine Parts Has anyone delt with PAW to buy their engine parts? Is their catalog worth it (I'm from Canada, it would cost $14.95)? All comments are welcome... __________________ Not Grandpa's C-20 anymore... 383 Stroker 425HP, 485Ft/Lbs Lowered 3.5" Front / 5" Rear 66,000 miles. Alberta, CANADA

08-09-2002, 05:26 PM	#2
Beast388 Suburbans RULE! Join Date: Jan 2000 Location: Clinton, IA 52732 Posts: 689	I bought my h-beam connecting rods from PAW. The service was good as well as delivery. I have a couple of buddies who have purchased parts from them as well......no problems. __________________ --Ben 71 GMC Suburban 4X4 The "Beast" 388 CID Stroker, TH350, NP205, 8-lug D44, 14BFF w/ Detroit, 4.10:1 gears, 4-Wheel Disks 4" Lift, 35" MT/R's.

08-09-2002, 06:39 PM	#4
MandarinSixSeven Seasonal Poster Join Date: Apr 2002 Location: Kelowna BC Canada Posts: 896	well, im gonna sound like a fool, but what is PAW? __________________ 67 GMC Short Step 350/4-Speed/3.08 Posi Front/Rear Sway Bars Kelowna BC, Canada Member of DTPW

08-09-2002, 09:37 PM	#6
MandarinSixSeven Seasonal Poster Join Date: Apr 2002 Location: Kelowna BC Canada Posts: 896	ahh i see, i knew it had to be something like that __________________ 67 GMC Short Step 350/4-Speed/3.08 Posi Front/Rear Sway Bars Kelowna BC, Canada Member of DTPW

08-09-2002, 10:19 PM	#7
Sinister Between Trucks... Join Date: Mar 2002 Location: Los Angeles, CA. Posts: 3,830	PAW kicks a$$... their catalog is thick as a phonebook and is full of helpful info... their house brand parts are high quality, in particular their stainless steel valves, (Manley), i like their cams as well... __________________ Beat it to fit, Paint it to match...

08-09-2002, 06:11 PM	#3
Longhorn Man its all about the +6 inches Join Date: Jan 2001 Location: Hilliard Ohio Posts: 2,690	While I have never dealt with PAW, I can say that Jasper makes some d@mn good engines. We get all our rebuilt gasolin engines from them at the shop i work at. (Jasper is about 3 miles from my shop) Everything from stock to what the h*ll was that?

08-10-2002, 03:02 AM	#8
dmec Senior Member Join Date: Jun 2000 Location: yucaipa ca Posts: 580	i have used PAW parts and have been satisfied. i have found a place called northernautoparts that has the best bang for the buck. i used their engine kit on my last project and they are my choice. chevy 350 complete rebuild kit with hyperutectic pistons and your choice of crane cams for $300. check them out on the net. they have free catalogs. www.northernautoparts.com

08-10-2002, 11:28 AM	#10
RON WOODGEARD Resident Young Old Dude ! Join Date: Jul 2001 Location: Nevada Posts: 1,948	PAW I have purchased a lot of stuff in the past from them, they have stuff like chrome bolts, You never see just chromed bolts at SUMMIT or JEGS. I almost forgot about them, I haven't ordered anything in about 7 or 8 years from them. I'll have to look their number up and order another catalog. RON

08-10-2002, 05:58 PM	#12
RON WOODGEARD Resident Young Old Dude ! Join Date: Jul 2001 Location: Nevada Posts: 1,948	Well ANDY, I don't live in COLUMBUS, I have a bundle of relatives that do but I've never met them either. never been there. Heck, I guess there is even a road there named after ME. hehehe One of my relatives used to own all of the ASH CAVE property. and I guess if you really want to find any WOODGEARD's there you just call the "JAIL'' I do know there is some lost relative that's a HIGHWAY PATROL in that area. But the rest are supposed to be kind of a roudy bunch, (I guess that's where I got it from) hehehe They live in and around COLUMBUS..some are hill people. SAY HI FOR ME IF YOU EVER RUN ACROSS ANY. RON RON IN PAHRUMP NEVADA, HOME OF ART BELL AND AREA 51.



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.