FS - Rolling Chassis - - The 1947 - Present Chevrolet & GMC Truck Message Board Network

LILREDGMC · 08-15-2006, 12:44 PM

I have three rolling chassis for sale.

1969 Chevrolet 3/4 ton 2wd, swing arms with coils,, overload leafs, from Nevada. It has been here in PA for a few years, stripped cab and bed for other use last fall. Frame has no damage, has light surface rust and could be an ideal use for restoration of another truck. Driveline still in it, 350/462 4spd, Eaton rear ratio unknown, not checked yet. Priced without engine and transmission.

1969 or 70 Chevrolet or GMC, 2wd 1/2 ton with leaf springs. Does have the cross member before the rear differential removed. Light surface rust, again, could be used in restoration of another truck. Was an Ohio truck. 12 Bolt rear, drum brake front, pan not yet removed, ratio unknown.

1971-72 Chevrolet GMC 1/2 ton 2wd, swing arm frame. Swing arms were sold, frame is solid from Colorado, has light surface rust, full disc front end, rear end still under truck, but no swing arms. No damage to frame or suspension. 12 bolt rear, expect it to be open, 3:08, cover not removed yet.

These could all be used for restoration of some other truck, i.e. blast, paint and transfer sheet metal etc.

I will get some pics to post hopefully late today.

Price $200 ORO each.

Hate to haul to scrap yard but can't keep forever.

LILREDGMC

lloyd k · 08-15-2006, 09:24 PM

very interested in the 69 leaf frame, do you have any pictures?

LILREDGMC · 08-15-2006, 10:11 PM

I will go through the pics I have and post one. I can forward all via email if you send me an email.

LILREDGMC

lloyd k · 08-15-2006, 10:18 PM

gmc500cid@wowway.com

08-15-2006, 12:44 PM	#1
LILREDGMC Registered User Join Date: Oct 2001 Location: Pittsburgh, Pennsylvania USA Posts: 461	FS - Rolling Chassis - I have three rolling chassis for sale. 1969 Chevrolet 3/4 ton 2wd, swing arms with coils,, overload leafs, from Nevada. It has been here in PA for a few years, stripped cab and bed for other use last fall. Frame has no damage, has light surface rust and could be an ideal use for restoration of another truck. Driveline still in it, 350/462 4spd, Eaton rear ratio unknown, not checked yet. Priced without engine and transmission. 1969 or 70 Chevrolet or GMC, 2wd 1/2 ton with leaf springs. Does have the cross member before the rear differential removed. Light surface rust, again, could be used in restoration of another truck. Was an Ohio truck. 12 Bolt rear, drum brake front, pan not yet removed, ratio unknown. 1971-72 Chevrolet GMC 1/2 ton 2wd, swing arm frame. Swing arms were sold, frame is solid from Colorado, has light surface rust, full disc front end, rear end still under truck, but no swing arms. No damage to frame or suspension. 12 bolt rear, expect it to be open, 3:08, cover not removed yet. These could all be used for restoration of some other truck, i.e. blast, paint and transfer sheet metal etc. I will get some pics to post hopefully late today. Price $200 ORO each. Hate to haul to scrap yard but can't keep forever. LILREDGMC

08-15-2006, 09:24 PM	#2
lloyd k Registered User Join Date: Feb 2004 Location: columbus,ohio Posts: 201	Re: FS - Rolling Chassis - very interested in the 69 leaf frame, do you have any pictures? __________________ 67 swb gmc,big block cadillac powered,400 turbo,2.73 ratio and disc brakes-basically a frankenstein of many parts-

08-15-2006, 10:11 PM	#3
LILREDGMC Registered User Join Date: Oct 2001 Location: Pittsburgh, Pennsylvania USA Posts: 461	Re: FS - Rolling Chassis - I will go through the pics I have and post one. I can forward all via email if you send me an email. LILREDGMC

08-15-2006, 10:18 PM	#4
lloyd k Registered User Join Date: Feb 2004 Location: columbus,ohio Posts: 201	Re: FS - Rolling Chassis - gmc500cid@wowway.com __________________ 67 swb gmc,big block cadillac powered,400 turbo,2.73 ratio and disc brakes-basically a frankenstein of many parts-



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.