So, you get anything done this weekend?

[Palf70Step]

Got a few things done on the 70. Mostly just sanding. It gets slow when you have get into the details area. Hopefully in a few weeks I get shoot some primer on it and see where we go from there.

Couple friends acquired a new wheels. The one is a 58 Delray. 75K original miles. Real nice shape. I wish I had looked at it several months ago when it was mentioned being for sale. Original paint and she fired up after cleaning out the 15 year old gas.

Board member EdB also go a new toy for his stable. 93 C4 Vette.

So I drolled some this weekend and actually spent some time on my truck. How about you folks?

[trkklr77]

friday, got the intake and valve covers back from the bead blaster and mounted the intake up, taped up the covers to repaint, then got stupidly drunk and passed out on the floor.

saturday, puke and hangover till 6pm, totaly my own fault, went out with same freinds and drank colas this time

sunday, cut down a tree and went wheelin, watched a kid bust a rear link bar and spent 3 hours getting him out and running again.

i have to work early and out of town tommorrow ao nothing but laundry tonight. still didnt paint the valve covers.

[krue]

Spent the weekend working with, then on , then with the '73...tractor that is.

[basketcase]

Friday I got a call from my carb man that my Holley is done. I should have it by mid week. Now I need to port match the intake and finish up the fuel system. Other than that I worked Saturday and took my wife out for her birthday today.

Tom

[redneckgirl]

Pulled the truck out of the garage...pulled it back in...pulled it out...pulled it back in...
But we did get a rollcage in the newest tough 'truck'...those little Honda CRX's fly nice! (but have a tendancy to land greasy side up...

[subtle71]

Pulled it out of the garage and left it running while I spent about twenty minutes cleaning out the garage. I had too many boxes stacked around it and it was starting to make me nervous.

[Draggn66]

Saturday put new rotors, calipers, pads & wheel bearings on the front. Sunday Changed out both motor mounts which were shot and also the tranny mount just for good measure.

[lilpup69chevy]

my friend just sold a 93 vette just like that with red interior 40th anniversary he only got 8 grand out of it tho

[oldiron]

Found a round tuit today an worked on the wifes 56 Belair. It has been sitting for 5 years. Changed the oil, put in new plugs, points, rotor and cap. Then installed a new electric fuel pump. Primed the carb and it fired up on the first crank. Made many browny points with my wife today. Probly will lose them all tomorrow.

[redneckgirl]

Originally Posted by oldiron

Found a round tuit today an worked on the wifes 56 Belair. It has been sitting for 5 years. Changed the oil, put in new plugs, points, rotor and cap. Then installed a new electric fuel pump. Primed the carb and it fired up on the first crank. Made many browny points with my wife today. Probly will lose them all tomorrow.

[panhandler62]

Watched football and races.. put some bricks in the back of my truck... uh... mowed the lawn.

[Roachgod]

Search for some big block towers on the net unsucessfully, and tryed to start weaning my dogs 11 puppys.

[RSRXION]

Hey roach, use the 73-87 454 mounts . It's easy and they are much sturdier. JMHO, Dean

As for what I got done.......... see my thread titled " Weak Mind "

[GMCPerson]

Put my interior together. I had torn my brand new seat cover and I fixed it with the $10.00 vinyl repair kit. After dying the seat to match the rest on the interior, most will never know. I also broke the second windshield I tried to put in. Time for the professionals to try now.

[crazy longhorn]

I put the stick back in the old longhorn....she just wasnt as much fun with an auto trans! http://community.webshots.com/user/hotrodhorn L

[67ChevyRedneck]

Tailgate and fenders and tried on some new shoes...

[clay68c10]

Diagnosed a bad wiper switch, ordered a new one, then went to the Pickups N Panels show in Farmers Branch.

[LUV2XCLR8]

Got it started Moved here out, backed her in, incase it happens
again, took a few pic's of her minus the rollybar, then I parked it

[bw4sale]

tracked down my busted brake line and got it off. Sanded down the air cleaner to get ready for paint. Cleaned the junk out of the interior from the previous owner. That's about it.

Oh yeah, I also changed the plugs in my '98.

[chevyboy55]

Had to put an axle & front brakes on my daughters honda car so it's ready to drive back to college next weekend

[Jimbotronics]

No progress this weekend - AF reserve stuff. Set up communications and 'giant voice' for the ORI (operational readiness exercise). Maybe I'll stop by and make sure everything is working during MOPP 4 alarm condition black

[ronh72c10]

Blasted and powder coated the valve covers and timing cover with Super Mirror Black.

Ron

[red71cheyenne]

Finished sanding and priming one wheel hump. Then stood around staring at the windshield frame and roll bar, trying to will them to finish themselves, while drinking beer. Who says I can't multitask???

[Lippyp]

cut the rest of the inner rocker rust out on the passenger side, started to fit the new panel. Going to do some more later today.

[5150]

Got my headers back from the ceramic shop, but had to work all weekend, so I won't be able to put them on until today or tomorrow.