A trip to Morrisville and Hardwick VT Junk Yards - The 1947 - Present Chevrolet & GMC Truck Message Board Network

**CPNE** · 04-23-2002, 12:03 PM

Decided to check out a couple of yards I had not been to in several years. I took my digital camera this time. The Northeastern part of VT is like a time warp. Things were literally in the same spots as I last remembered them. It seem like nobody knows about them. The Hardwick VT yard has thousands of cars and trucks some dating back to the 20's. Alot of them are mostly complete but have been there for decades. The Morrisville yard is smaller but has cars and trucks from the 40's up. This yard has a couple Blazers and 3 burbs. I also noticed to batwinged Impalas from 59 as well. Unfortunately the lower end of the Morrisville yard is on a flood plain and everything is covered in silt and sits in the muck. Don't even think about sheetmetal here, though there were a few decent pieces. Lot's of brackets, linkages, and other parts still intact though.

------------------
Jeff Jesseman
Cheyenne Parts Northeast
Franconia, NH

67 Chevy SWB Fleetside
70 GMC Burb 1/2 ton 2wd
72 Chevy Burb 3/4 ton 4x4

Parts bought and sold

jku72 · 04-23-2002, 12:08 PM

Is this where the utility seats were?
Or in another location?

------------------
jku
70 C30 CST Longhorn
68k10 burb
69 K5 beater
43 willys GPW
40 Chev coupe
67 catalina

**CPNE** · 04-23-2002, 12:09 PM

Yes, and they are still exactly where I left them. I may be making a trip back. I can get them for you if you want. They are in the silty mucky area and need TLC

------------------
Jeff Jesseman
Cheyenne Parts Northeast
Franconia, NH

67 Chevy SWB Fleetside
70 GMC Burb 1/2 ton 2wd
72 Chevy Burb 3/4 ton 4x4

Parts bought and sold

jku72 · 04-23-2002, 12:13 PM

can they be recovered, or are they DEAD.
How much is the next question, and the third is when the hell am I going to get to you get my parts? Jeesh, I have been so busy, I am truley sorry I left you stuck with them for so long, I am trying though. If they are a nucience to you, you can store them outside, but just off the ground, I will be there asap!!! I promise!

**CPNE** · 04-23-2002, 12:16 PM

They are salvagable. They are inside the Blazer and I don't think the river came up this year. Foam is there as is steel backs and frame. No brackets. Your stuff is in my storage area and not in the way.

------------------
Jeff Jesseman
Cheyenne Parts Northeast
Franconia, NH

67 Chevy SWB Fleetside
70 GMC Burb 1/2 ton 2wd
72 Chevy Burb 3/4 ton 4x4

Parts bought and sold

jku72 · 04-23-2002, 12:20 PM

Brackets? dont they just bolt to the floor? I only need the passenger side. My blazer is getting parted, and it has one on the drivers side. I dont know what they might cost, but 40 bucks is what I could pay for the one.

**CPNE** · 04-23-2002, 12:24 PM

They use the same brackets as the contoured buckets, or so I assumed. I'll see what I can do

------------------
Jeff Jesseman
Cheyenne Parts Northeast
Franconia, NH

67 Chevy SWB Fleetside
70 GMC Burb 1/2 ton 2wd
72 Chevy Burb 3/4 ton 4x4

Parts bought and sold

imaindianoutlaw · 04-23-2002, 02:49 PM

gods country! Is there a camping area there? can I make reservations at the lodge?

------------------
Charles W. Hein
S. Williamsport PA

imaindianoutlaw@yahoo.com

REFRIGERATION TECH

1971 Rolling chassis

FOR SALE
1963 Pontiac Tempest
1965 Pontiac GTO
1956 Pontiac 2 dr

04-23-2002, 12:03 PM	#1
CPNE Resident Curmudgeon Join Date: Dec 1999 Location: NH Posts: 6,662	A trip to Morrisville and Hardwick VT Junk Yards Decided to check out a couple of yards I had not been to in several years. I took my digital camera this time. The Northeastern part of VT is like a time warp. Things were literally in the same spots as I last remembered them. It seem like nobody knows about them. The Hardwick VT yard has thousands of cars and trucks some dating back to the 20's. Alot of them are mostly complete but have been there for decades. The Morrisville yard is smaller but has cars and trucks from the 40's up. This yard has a couple Blazers and 3 burbs. I also noticed to batwinged Impalas from 59 as well. Unfortunately the lower end of the Morrisville yard is on a flood plain and everything is covered in silt and sits in the muck. Don't even think about sheetmetal here, though there were a few decent pieces. Lot's of brackets, linkages, and other parts still intact though. ------------------ Jeff Jesseman Cheyenne Parts Northeast Franconia, NH 67 Chevy SWB Fleetside 70 GMC Burb 1/2 ton 2wd 72 Chevy Burb 3/4 ton 4x4 Parts bought and sold __________________ Currently on or near the homestead: 67 Chevy SWB 2WD stepside 350/3 on tree (Pat's) 67 GMC SWB 2WD Fleet 402/auto (Brian's under construction) 67 Chevy 3/4 ton 2WD 402/auto (Business Hauler) 67 Chevy 1 ton dually 2WD 396/4 speed (Former business hauler, Needs TLC) 68 Chevy 1/2 ton Suburban 2WD 250 six/3 on tree (Brian's Needs TLC) 70 Chevy 3/4 ton 4WD 350/4 speed (Pat's - Disguised as a 68 GMC) 71 Chevy SWB stepside (Crushed by tree - parts donor) 72 Chevy 3/4 ton 4WD (Parts donor) 72 Chevy 3/4 ton 4WD Suburban (Parts Donor) 72 GMC 3/4 ton 4WD 292 six/4 speed (Mine - Disguised as a 67 GMC) 81 GMC 4WD Dually Dump Body 350/4 speed (Business Hauler) 82 Camaro Z/28 355/Super T-10 (Pat's toy) 93 Caprice 9C1 (Brian's Cop Car) 02 Toyota Camry (Reliable but a souless steel and plastic hulk) 2011 2SS RS Camaro M6 Factory Hurst Shifter Maybe I need to sell some of this crap Yet another Bozo with a sawz-all

04-23-2002, 12:08 PM	#2
jku72 Registered User Join Date: Jan 2002 Location: cornville, maine Posts: 659	Is this where the utility seats were? Or in another location? ------------------ jku 70 C30 CST Longhorn 68k10 burb 69 K5 beater 43 willys GPW 40 Chev coupe 67 catalina __________________ jku Cornville, Maine 68 C10 burb 42 Willys MB 46 Dodge WF-32 1.5 ton 53 & 56 Olds' 60 Cadillac 22 Dodge Brothers

04-23-2002, 12:09 PM	#3
CPNE Resident Curmudgeon Join Date: Dec 1999 Location: NH Posts: 6,662	Yes, and they are still exactly where I left them. I may be making a trip back. I can get them for you if you want. They are in the silty mucky area and need TLC ------------------ Jeff Jesseman Cheyenne Parts Northeast Franconia, NH 67 Chevy SWB Fleetside 70 GMC Burb 1/2 ton 2wd 72 Chevy Burb 3/4 ton 4x4 Parts bought and sold __________________ Currently on or near the homestead: 67 Chevy SWB 2WD stepside 350/3 on tree (Pat's) 67 GMC SWB 2WD Fleet 402/auto (Brian's under construction) 67 Chevy 3/4 ton 2WD 402/auto (Business Hauler) 67 Chevy 1 ton dually 2WD 396/4 speed (Former business hauler, Needs TLC) 68 Chevy 1/2 ton Suburban 2WD 250 six/3 on tree (Brian's Needs TLC) 70 Chevy 3/4 ton 4WD 350/4 speed (Pat's - Disguised as a 68 GMC) 71 Chevy SWB stepside (Crushed by tree - parts donor) 72 Chevy 3/4 ton 4WD (Parts donor) 72 Chevy 3/4 ton 4WD Suburban (Parts Donor) 72 GMC 3/4 ton 4WD 292 six/4 speed (Mine - Disguised as a 67 GMC) 81 GMC 4WD Dually Dump Body 350/4 speed (Business Hauler) 82 Camaro Z/28 355/Super T-10 (Pat's toy) 93 Caprice 9C1 (Brian's Cop Car) 02 Toyota Camry (Reliable but a souless steel and plastic hulk) 2011 2SS RS Camaro M6 Factory Hurst Shifter Maybe I need to sell some of this crap Yet another Bozo with a sawz-all

04-23-2002, 12:13 PM	#4
jku72 Registered User Join Date: Jan 2002 Location: cornville, maine Posts: 659	can they be recovered, or are they DEAD. How much is the next question, and the third is when the hell am I going to get to you get my parts? Jeesh, I have been so busy, I am truley sorry I left you stuck with them for so long, I am trying though. If they are a nucience to you, you can store them outside, but just off the ground, I will be there asap!!! I promise! __________________ jku Cornville, Maine 68 C10 burb 42 Willys MB 46 Dodge WF-32 1.5 ton 53 & 56 Olds' 60 Cadillac 22 Dodge Brothers

04-23-2002, 12:16 PM	#5
CPNE Resident Curmudgeon Join Date: Dec 1999 Location: NH Posts: 6,662	They are salvagable. They are inside the Blazer and I don't think the river came up this year. Foam is there as is steel backs and frame. No brackets. Your stuff is in my storage area and not in the way. ------------------ Jeff Jesseman Cheyenne Parts Northeast Franconia, NH 67 Chevy SWB Fleetside 70 GMC Burb 1/2 ton 2wd 72 Chevy Burb 3/4 ton 4x4 Parts bought and sold __________________ Currently on or near the homestead: 67 Chevy SWB 2WD stepside 350/3 on tree (Pat's) 67 GMC SWB 2WD Fleet 402/auto (Brian's under construction) 67 Chevy 3/4 ton 2WD 402/auto (Business Hauler) 67 Chevy 1 ton dually 2WD 396/4 speed (Former business hauler, Needs TLC) 68 Chevy 1/2 ton Suburban 2WD 250 six/3 on tree (Brian's Needs TLC) 70 Chevy 3/4 ton 4WD 350/4 speed (Pat's - Disguised as a 68 GMC) 71 Chevy SWB stepside (Crushed by tree - parts donor) 72 Chevy 3/4 ton 4WD (Parts donor) 72 Chevy 3/4 ton 4WD Suburban (Parts Donor) 72 GMC 3/4 ton 4WD 292 six/4 speed (Mine - Disguised as a 67 GMC) 81 GMC 4WD Dually Dump Body 350/4 speed (Business Hauler) 82 Camaro Z/28 355/Super T-10 (Pat's toy) 93 Caprice 9C1 (Brian's Cop Car) 02 Toyota Camry (Reliable but a souless steel and plastic hulk) 2011 2SS RS Camaro M6 Factory Hurst Shifter Maybe I need to sell some of this crap Yet another Bozo with a sawz-all

04-23-2002, 12:20 PM	#6
jku72 Registered User Join Date: Jan 2002 Location: cornville, maine Posts: 659	Brackets? dont they just bolt to the floor? I only need the passenger side. My blazer is getting parted, and it has one on the drivers side. I dont know what they might cost, but 40 bucks is what I could pay for the one. __________________ jku Cornville, Maine 68 C10 burb 42 Willys MB 46 Dodge WF-32 1.5 ton 53 & 56 Olds' 60 Cadillac 22 Dodge Brothers

04-23-2002, 12:24 PM	#7
CPNE Resident Curmudgeon Join Date: Dec 1999 Location: NH Posts: 6,662	They use the same brackets as the contoured buckets, or so I assumed. I'll see what I can do ------------------ Jeff Jesseman Cheyenne Parts Northeast Franconia, NH 67 Chevy SWB Fleetside 70 GMC Burb 1/2 ton 2wd 72 Chevy Burb 3/4 ton 4x4 Parts bought and sold __________________ Currently on or near the homestead: 67 Chevy SWB 2WD stepside 350/3 on tree (Pat's) 67 GMC SWB 2WD Fleet 402/auto (Brian's under construction) 67 Chevy 3/4 ton 2WD 402/auto (Business Hauler) 67 Chevy 1 ton dually 2WD 396/4 speed (Former business hauler, Needs TLC) 68 Chevy 1/2 ton Suburban 2WD 250 six/3 on tree (Brian's Needs TLC) 70 Chevy 3/4 ton 4WD 350/4 speed (Pat's - Disguised as a 68 GMC) 71 Chevy SWB stepside (Crushed by tree - parts donor) 72 Chevy 3/4 ton 4WD (Parts donor) 72 Chevy 3/4 ton 4WD Suburban (Parts Donor) 72 GMC 3/4 ton 4WD 292 six/4 speed (Mine - Disguised as a 67 GMC) 81 GMC 4WD Dually Dump Body 350/4 speed (Business Hauler) 82 Camaro Z/28 355/Super T-10 (Pat's toy) 93 Caprice 9C1 (Brian's Cop Car) 02 Toyota Camry (Reliable but a souless steel and plastic hulk) 2011 2SS RS Camaro M6 Factory Hurst Shifter Maybe I need to sell some of this crap Yet another Bozo with a sawz-all

04-23-2002, 02:49 PM	#8
imaindianoutlaw GMC SHORT FLEET F/S Join Date: Jun 2000 Location: SOUTH WILLIAMSPORT PENNSYLVANNIA Posts: 2,117	gods country! Is there a camping area there? can I make reservations at the lodge? ------------------ Charles W. Hein S. Williamsport PA imaindianoutlaw@yahoo.com REFRIGERATION TECH 1971 Rolling chassis FOR SALE 1963 Pontiac Tempest 1965 Pontiac GTO 1956 Pontiac 2 dr __________________ CHARLES WADE HEIN HVACR FOREMAN. LEWISBURG U.S.P.



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.