How to remove gas pedal - The 1947 - Present Chevrolet & GMC Truck Message Board Network

**MikeB** · 10-14-2006, 04:16 PM

I feel really dumb, but I'm trying to remove my carpet and can't see how to unbolt the gas pedal from the floor. I installed the carpet 15 years ago, but just can't remember how to remove the pedal.

By the way, it's a pedal with the stainless trim, if that makes any difference.

70GMCer · 10-14-2006, 04:24 PM

Just pull it up. It just snaps into to mounting balls on the floor. It should just pry off.......

**MikeB** · 10-14-2006, 05:15 PM

Ah, it's all coming back to me. That did it! Thanks.

10-14-2006, 04:16 PM	#1
MikeB Senior Member Join Date: Jul 2000 Location: North Texas Posts: 3,597	How to remove gas pedal I feel really dumb, but I'm trying to remove my carpet and can't see how to unbolt the gas pedal from the floor. I installed the carpet 15 years ago, but just can't remember how to remove the pedal. By the way, it's a pedal with the stainless trim, if that makes any difference. __________________ Mike 1969 C10 LWB -- owned for 35 years. 350/TH350, 3.08 posi, 1st Gen Vintage Air, recent AAW wiring harness, 5-lug conversion, 1985 spindles and brakes. 1982 C10 SWB -- sold 1981 C10 Silverado LWB -- sold, but wish I still had it! 1969 C10 (not the current one) that I bought in the early 1980s. Paid $1200; sold for $1500 a few years later. Just a hint at the appreciation that was coming. Retired as a factory automation products salesman. Worked part-time over the years for an engine builder and a classic car repair shop. Member here for 24 years! This is the very first car/truck Internet forum I joined. I still used a dial-up modem back then!

10-14-2006, 04:24 PM	#2
70GMCer Senior Member Join Date: Apr 2005 Location: Joppa, Maryland Posts: 4,408	Re: How to remove gas pedal Just pull it up. It just snaps into to mounting balls on the floor. It should just pry off....... __________________ 1997 GMC Sierra Ext 1965 Mustang

10-14-2006, 05:15 PM	#3
MikeB Senior Member Join Date: Jul 2000 Location: North Texas Posts: 3,597	Re: How to remove gas pedal Ah, it's all coming back to me. That did it! Thanks. __________________ Mike 1969 C10 LWB -- owned for 35 years. 350/TH350, 3.08 posi, 1st Gen Vintage Air, recent AAW wiring harness, 5-lug conversion, 1985 spindles and brakes. 1982 C10 SWB -- sold 1981 C10 Silverado LWB -- sold, but wish I still had it! 1969 C10 (not the current one) that I bought in the early 1980s. Paid $1200; sold for $1500 a few years later. Just a hint at the appreciation that was coming. Retired as a factory automation products salesman. Worked part-time over the years for an engine builder and a classic car repair shop. Member here for 24 years! This is the very first car/truck Internet forum I joined. I still used a dial-up modem back then!



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.