WTB Driveshaft for SWB w/TH400 and SBC - The 1947 - Present Chevrolet & GMC Truck Message Board Network

krue · 11-01-2006, 10:19 PM

Preferably located nearby. Any leads?

krue · 11-03-2006, 12:16 PM

ttt

krue · 11-05-2006, 02:21 PM

lilpup69chevy · 11-05-2006, 03:20 PM

for a longshaft th400 or a shortshaft? i just sold a longshaft th400 for 250 bucks yesterday, anywho i have two driveshafts for my 69 swb i just gotta figure out which one works for the 350th shortshaft, have you thought about taking a longer one and having it cut down to the right size? there are several shops around here that do that type of stuff just a thought might be cheaper in the long run for ya

krue · 11-05-2006, 04:05 PM

No clue on what th400 I have, it came out of a 84 p/u with a 305. It has the bolt on yoke, guess I'll convert it to the slip style and have a one piece ds made for it.

lilpup69chevy · 11-05-2006, 05:10 PM

the one i sold came out of an 88 2wd pickup it was a longshaft and it was already the slip on style yoke kinda wierd trans it was behind a 4.3 v6 factory guess it was a special order or something

90\87Formula · 11-05-2006, 06:22 PM

Try www.car-part.com.

Shortshaft will be 28 3/8" long and longshaft will be 30 11/16" long. From front lip of bellhousing case to rear lip of tailshaft case ( not end of tailshaft). Oh, there's also one that has a 13" tailshaft that is 37 7/8" long. I've never seen one of those, so I don't know what they were put in.

stynchrr · 11-08-2006, 10:34 AM

It that the only way to make it work is to switch to a slip style yoke? I have the same set up i think. I got a 400 from an 86 1 ton and it had a 2 piece and i have a swb truck. Is there a 72 2 piece that i could get that would work? Is that what you were looking for Krue? What would be involved in switching it to a slip yoke?

stynchrr · 11-08-2006, 11:26 AM

I think I got an answer Denny's drive shafts makes a yoke to convert to a slip style. 69.95. They got some good info on their site. I guess the drive shaft in no place to cheap out.

11-01-2006, 10:19 PM	#1
krue Designated A-hole! Join Date: Mar 2003 Location: South Mississippi Posts: 36,448	WTB Driveshaft for SWB w/TH400 and SBC Preferably located nearby. Any leads? __________________ "If it ain't broke, fix it 'til it is!" Being stupid ain't illegal. We're Still Debt Free Except for the House!!! www.daveramsey.com 70 GMC SWB Stepside project "Green Booger" soon to be 6.0l/4l80e 93 S-10 "Poppaw's Truck"

11-03-2006, 12:16 PM	#2
krue Designated A-hole! Join Date: Mar 2003 Location: South Mississippi Posts: 36,448	Re: WTB Driveshaft for SWB w/TH400 and SBC ttt __________________ "If it ain't broke, fix it 'til it is!" Being stupid ain't illegal. We're Still Debt Free Except for the House!!! www.daveramsey.com 70 GMC SWB Stepside project "Green Booger" soon to be 6.0l/4l80e 93 S-10 "Poppaw's Truck"

11-05-2006, 02:21 PM	#3
krue Designated A-hole! Join Date: Mar 2003 Location: South Mississippi Posts: 36,448	Re: WTB Driveshaft for SWB w/TH400 and SBC __________________ "If it ain't broke, fix it 'til it is!" Being stupid ain't illegal. We're Still Debt Free Except for the House!!! www.daveramsey.com 70 GMC SWB Stepside project "Green Booger" soon to be 6.0l/4l80e 93 S-10 "Poppaw's Truck"

11-05-2006, 03:20 PM	#4
lilpup69chevy 67-72 parts finder Join Date: Aug 2006 Location: southeast mo Posts: 788	Re: WTB Driveshaft for SWB w/TH400 and SBC for a longshaft th400 or a shortshaft? i just sold a longshaft th400 for 250 bucks yesterday, anywho i have two driveshafts for my 69 swb i just gotta figure out which one works for the 350th shortshaft, have you thought about taking a longer one and having it cut down to the right size? there are several shops around here that do that type of stuff just a thought might be cheaper in the long run for ya __________________ 1969 chevy shortstep 2wd (under construction) 1981 chevy scottsdale lwb 2wd (parts chaser) 2004 pontiac gto (daily driver) 2004 pontiac grand prix gt (the ol ladys car) 1985 chevy short wide 1970 chevy c10 lwb (another parts rig) 1969 gmc lwb (rainy day project) 1968 chevy lwb c10 250 I6 3 spd (soon to be swb)

11-05-2006, 04:05 PM	#5
krue Designated A-hole! Join Date: Mar 2003 Location: South Mississippi Posts: 36,448	Re: WTB Driveshaft for SWB w/TH400 and SBC No clue on what th400 I have, it came out of a 84 p/u with a 305. It has the bolt on yoke, guess I'll convert it to the slip style and have a one piece ds made for it. __________________ "If it ain't broke, fix it 'til it is!" Being stupid ain't illegal. We're Still Debt Free Except for the House!!! www.daveramsey.com 70 GMC SWB Stepside project "Green Booger" soon to be 6.0l/4l80e 93 S-10 "Poppaw's Truck"

11-05-2006, 05:10 PM	#6
lilpup69chevy 67-72 parts finder Join Date: Aug 2006 Location: southeast mo Posts: 788	Re: WTB Driveshaft for SWB w/TH400 and SBC the one i sold came out of an 88 2wd pickup it was a longshaft and it was already the slip on style yoke kinda wierd trans it was behind a 4.3 v6 factory guess it was a special order or something __________________ 1969 chevy shortstep 2wd (under construction) 1981 chevy scottsdale lwb 2wd (parts chaser) 2004 pontiac gto (daily driver) 2004 pontiac grand prix gt (the ol ladys car) 1985 chevy short wide 1970 chevy c10 lwb (another parts rig) 1969 gmc lwb (rainy day project) 1968 chevy lwb c10 250 I6 3 spd (soon to be swb)

11-05-2006, 06:22 PM	#7
90\87Formula Registered User $90\87Formula's Avatar$ Join Date: Oct 2000 Location: Abilene Texas Posts: 1,756	Re: WTB Driveshaft for SWB w/TH400 and SBC Try www.car-part.com. Shortshaft will be 28 3/8" long and longshaft will be 30 11/16" long. From front lip of bellhousing case to rear lip of tailshaft case ( not end of tailshaft). Oh, there's also one that has a 13" tailshaft that is 37 7/8" long. I've never seen one of those, so I don't know what they were put in. __________________ Robert Member 1532 Last edited by 90\87Formula; 11-05-2006 at 06:30 PM. Reason: more details
$90\87Formula is offline$

11-08-2006, 10:34 AM	#8
stynchrr Registered User Join Date: Oct 2005 Location: Dover Delaware Posts: 270	Re: WTB Driveshaft for SWB w/TH400 and SBC It that the only way to make it work is to switch to a slip style yoke? I have the same set up i think. I got a 400 from an 86 1 ton and it had a 2 piece and i have a swb truck. Is there a 72 2 piece that i could get that would work? Is that what you were looking for Krue? What would be involved in switching it to a slip yoke?

11-08-2006, 11:26 AM	#9
stynchrr Registered User Join Date: Oct 2005 Location: Dover Delaware Posts: 270	Re: WTB Driveshaft for SWB w/TH400 and SBC I think I got an answer Denny's drive shafts makes a yoke to convert to a slip style. 69.95. They got some good info on their site. I guess the drive shaft in no place to cheap out.



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.