![]() |
Register or Log In To remove these advertisements. |
|
|
![]() |
|
Thread Tools | Display Modes |
|
![]() |
#1 |
Happy to be here
![]() Join Date: Mar 2000
Location: Cypress, TX
Posts: 39,021
|
What did you get done? 11/05
I was off this weekend so I got a few things done. Friday night my daughter stayed at a friends house so I took my wife to the movies. We watched "the Guardian" with Kevin Costner. If you haven't seen it I highly recommend it. The show was really good, and it is one that you can take the family to. There is very little cussing, no nudity, and no violence.
Saturday I cleaned one half of my garage, then cleaned both our daily drivers, and put a coat of wax on my 06 Silverado CC. I took my wife parents to dinner, then went to a couple of local cruise nights. Today I spent in the yard with my yard crew. We cleaned all the beds, cut everything back, and planted fall color. I took my daughter and wife to see Santa Clause III. It sucked! Don't waste your time on this one, it was booooring. What did you get done?
__________________
Follow me on Facebook and Instagram @N2trux.com Articles- "Jake" the 84 to 74 crewcab "Elwood" the77_Remix 85 GMC Sierra "Scarlett" "Refining Sierra" |
![]() |
![]() |
![]() |
#2 |
Sb 400 club
Join Date: Nov 2005
Location: NH / MA
Posts: 2,746
|
Re: What did you get done? 11/05
i did not get anything truck done as i stayed at school this weekend working on papers and trying to figure out what classes to take for the spring. I really should have gone to school to become a desil tech or a dealer mechanic or just stayed with the compainy i work for over the summer maintaning rental equippment. Don't get me wrong these days a college education is worth alot when looking for a job but man it is so much $$. did make a deal with my lenders (aka my parents) that if i go to the instated school they will gve me the diffrance between the two schools to do with as i want hence the thread i did a while back about spending some money to make my truck a manual and adding a few things. Any ways i did plan some stuff for net weekend which include getting my trucks collent system fpressure flushe and pulling the insurance for winter, also cleaning out the gardge, wiring in my tach and helping my dad put on the new drivers side hub, new taylor wires, and new acdelco spark pluggs on the tahoe.
also if i get a chance i am gonna run to the junk yard and grab a set of stock tails and hosings to see how i like that look. i will also do the inside of the new hosings with chrome tape to make them brighter
__________________
![]() ![]() 77 K10 Project / daily driver "The Grinch" http://67-72chevytrucks.com/vboard/s...d.php?t=318363 1956 Willys Wagon (327 chevy) Project (Now Buick 225) 1980 Corvette L-48 4 speed 1992 Mustang GT built 5.0 5 speed ![]() 1985 C10 LWB Sold 1982 K10 SWB plow truck Parted out 1986 D30 M1028 fire brush truck Parted out Last edited by 84 400; 11-05-2006 at 08:49 PM. |
![]() |
![]() |
![]() |
#3 |
Registered User
Join Date: Apr 2001
Location: DALLAS,TX
Posts: 22,132
|
Re: What did you get done? 11/05
Well, I worked from 7am Friday until 4ish Sat am so I was one tired SOB.
I slept in Sat & got up to take my weekly trip to the shop & see what my good friends were up to. N2Billet is making some good progress on his latest aquisition & my buddy Rogers shop projects are moving along well. After getting home from the shop I made an extension cord for my new tools that were recently purchased. The cord allows using a welder or plasma-cutter in the driveway & I just happen to have 1 of each. Sat night my GF & I went to see The Departed. Pretty good flick but kinda violent (it was a long movie too). Sun we watched the Cowboys lose & then the race. I needed a lazy day.....
__________________
67SWB-B.B.RetroRod 64SWB-Recycle 89CCDually-Driver/Tow Truck 99CCSWB Driver All Fleetsides @rattlecankustoms in IG Building a small, high rpm engine with the perfect bore, stroke and rod ratio is very impressive. It's like a highly skilled Morrocan sword fighter with a Damascus Steel Scimitar..... Cubic inches is like Indiana Jones with a cheap pistol. |
![]() |
![]() |
![]() |
#4 |
Drag Racer
Join Date: Nov 2006
Location: Mason City, Iowa
Posts: 1,276
|
Re: What did you get done? 11/05
i camped all weekend with my boy scout troop....a fun but long weekend
__________________
Zach Hall 1983 Chevy C10 R/T: .194 60': 2.322 330: 6.379 1/8: 9.803 MPH: 71.37 1000: 12.781 1/4: 15.314 MPH: 88.79 |
![]() |
![]() |
![]() |
#5 |
Stepsides RULE
Join Date: Jul 2004
Location: Pineville, LA
Posts: 1,921
|
Re: What did you get done? 11/05
Changed oil+filter as well as the PCV valve, rode around for a while moaning about the sad shape of Ol' Red. Pulled the grile from the 84 and cleaned it up a bit. Ordered a new CD player for my truck for my birthday. Pioneer DEH-P5800MP. Should have install pics next edition of "What Did You Get Done?"
![]()
__________________
1981 Chevy C10 Custom Deluxe Stepside 350 V8, headers, side exhausts, 3-speed auto SOLD 1980 Chevy C10 Custum Deluxe Stepside 305 V8, Edelbrock Performer Intake, Edelbrock 1406 600CFM 4-barrel, TH350C. Bent rod. SOLD 1984 GMC Sierra Classic Longbed 6.2L Diesel SOLD 2009 Kawasaki KLX-250S too many mods for this signature 1999 Honda Accord EX 4-cylinder, 17" Motegi Wheels 215/45/17 Sumitomo tires, Tein S-Tech lowering springs, KYB GR2 shocks, Acura TL 20mm rear swaybar, debadged, blackhoused headlights, Short-Ram Intake Cardomain of the Accord |
![]() |
![]() |
![]() |
#6 |
Registered User
Join Date: Aug 2002
Location: Crittenden, KY
Posts: 1,965
|
Re: What did you get done? 11/05
Went to Raleigh, NC to pickup my '85 Blazer, my buddy's dad owns a landscape company there and let us use a truck NO CHARGE, so it only cost me fuel to get it here. which was still $95.00, because the F350 only got 6.5 MPG. haha. Got the truck here on Saturday, and pushed into a parking space. Today I took the trash out of the inside, removed the flimsy little gay stock console, and also pulled the running boards off of it. Now, I just gotta find a yard to pull a vent wing out of, and a door mirror. Should be puttin a motor in it in a few weeks. See post here.
http://67-72chevytrucks.com/vboard/s...3&goto=newpost Brandon |
![]() |
![]() |
![]() |
#7 |
yeller
Join Date: Oct 2001
Location: Twin Cities
Posts: 13,824
|
Re: What did you get done? 11/05
Went junkyarding Saturday and picked up this little gem. The pictures are terrible, looks much better in person.
![]()
__________________
Jeff 73-87.com 73-87.com Facebook page 73-87 cab corner 6x9 speaker brackets for sale 67-72 cab corner speaker brackets for sale 47-54 cab corner speaker brackets for sale |
![]() |
![]() |
![]() |
#8 |
Happy to be here
![]() Join Date: Mar 2000
Location: Cypress, TX
Posts: 39,021
|
Re: What did you get done? 11/05
Is it a red ram or Hemi? 392 or 426?
__________________
Follow me on Facebook and Instagram @N2trux.com Articles- "Jake" the 84 to 74 crewcab "Elwood" the77_Remix 85 GMC Sierra "Scarlett" "Refining Sierra" |
![]() |
![]() |
![]() |
#9 |
yeller
Join Date: Oct 2001
Location: Twin Cities
Posts: 13,824
|
Re: What did you get done? 11/05
It is a little older than those, it is a '53 Desoto Fire Dome Eight, removed from the Desoto...been sitting in the yard since 1960. It is a 276 cu. It is missing the air cleaner assembly, generator, and power steering assembly...but other than that it is complete and clean...so far (after a little disassembly).
__________________
Jeff 73-87.com 73-87.com Facebook page 73-87 cab corner 6x9 speaker brackets for sale 67-72 cab corner speaker brackets for sale 47-54 cab corner speaker brackets for sale |
![]() |
![]() |
![]() |
#10 |
Registered User
Join Date: Aug 2006
Location: Florida
Posts: 1,684
|
Re: What did you get done? 11/05
Me and my son made a dump run on Saturday, too much junk in the garage. Threw away more computer parts than I care to think about.
Washed my truck Sunday, and then pulled it back in the garage ![]() Ordered the ls1 install guide/kit on Friday from local dealer. Dreaming about some wheels and tires and lowering my truck, just can't seem to find any leaves left on the money tree out back. ![]() |
![]() |
![]() |
![]() |
#11 |
its just $$$$$
Join Date: Jul 2003
Location: OK
Posts: 2,078
|
Re: What did you get done? 11/05
I fianlly finished tying up all the loose ends on a TPI swap I have been working on for a guy. I made some mounts for a dual electric fan set-up he got at the boneyard. He also wanted a 73-80 column installed, i got it done, but dont recommend it.
As a side note: an 89 Ford Bronco fuel pump works excellent as a frame rail mounted pusher. I was very impressed, and it is much cheaper than many aftermarket pumps(@$100). |
![]() |
![]() |
![]() |
#12 |
Registered User
![]() Join Date: Apr 2005
Location: Ar
Posts: 558
|
Re: What did you get done? 11/05
Well I never post on this subject, becuz of me being lazy. I just looked at my truck as usual. I did however attend my first airshow. It was awesome. It's good to see my tax dollars going towards such a powerful/strategical use.
|
![]() |
![]() |
![]() |
#13 |
Registered User
![]() Join Date: Jul 2003
Location: Franklin, NE
Posts: 387
|
Re: What did you get done? 11/05
I actually got some truck related stuff done. Changed out the valve cover gaskets on my 78 K-10. It would just about smoke you out if when I drove it. Also changed the plug wires and vacuum lines. Had a small engine fire a couple of months ago and singed everything. That would be the one thing that everyone should have in their truck is a fire extinguisher, if not for it, my truck would have burned up. Also yanked the battery tray out of my 79 diesel parts truck and put it in the K-10 to replace the rusted one. I still have a little oil burnoff, but I think it is just some old oil on the spark plug heat shields.
|
![]() |
![]() |
![]() |
#14 |
Registered User
Join Date: Oct 2003
Location: OC CA
Posts: 1,374
|
Re: What did you get done? 11/05
Saturday morning had a local shop install a pair O-Sensor bungs. Installed O-Sensors, spent better part of Saturday and Sunday am wiring ignition switched O-sensor heating circuit. Oh yea filter and oil change. Next step, bring O-scope and monitor both O-Sensors while seting idle mixture. I think that Holley (4175) is way too lean. - next wekend.
//RF
__________________
"The Beast" 1975 Chevrolet C20 longbed 350/700R4! with 3inch body lift Dual Flowmasters Super 40's! TBI retrofit completed (2007-07-29) ![]() New 383CID (+030) 08-304-8 9.5:1CR x36,005 (2012-12-17) |
![]() |
![]() |
![]() |
#15 |
Professional Grade
Join Date: May 2003
Location: Fort McMurray, Alberta
Posts: 7,915
|
Re: What did you get done? 11/05
I went to the back shop, saw my baby stuck behind the camper, and decided to give it a couple minutes run time. Hopped in, turned the key and she roared to life on the second crank. Ran it for 10 minutes until it was at full operating temp, revved it a few times, then shut her down for the next month
![]() ![]()
__________________
1995 Chevrolet 2 Door Tahoe (6.6L LBZ Duramax / ZF6 / NP241 with 1 ton solid axle swap) |
![]() |
![]() |
![]() |
#16 |
OBS guy
Join Date: Jun 2004
Location: SoCal
Posts: 1,060
|
Re: What did you get done? 11/05
Watched Borat on Saturday... That was a ridiculous funny movie, except maybe the naked fighting scene... yuck!!!
I had a total down weekend. We all need them from time to time, and mine was overdue. Played with the kids, played video games and just had fun.
__________________
88 Suburban Goodies- Alpine, Auto Meter, BDS, Bilstein, B&M, BFG, Borgeson, Bushwhacker, Cowl hood, Flowmaster, Genuine Gear, Holley, Infinity, JVC, K&N, MB Wheels, MSD, Pioneer, Skyjacker, Sony, Thorley, Walker + more |
![]() |
![]() |
![]() |
#17 |
Registered User
Join Date: Jan 2005
Location: beaumont,tx
Posts: 757
|
Re: What did you get done? 11/05
worked on my buddy ranger tryin to finish up puttin his ho 302 back in his ranger and try to get it runnin
sat worked till 1 got home changed cloths and decided to take my dads show truck to a local carshow to get not even half way there to notice that the exhuast is poppin when u let off the gas since i know how bad his exhuast is so i thought the muffler fell off so i pulled over and heard the noise and it wasnt comin from the muffler come to find out the ram horn manifolds he used broke right in half so i had to take it easy to bring it back to the shop so i didnt hurt it but its hard when its blown with a stall in it but i got it back and still went to the show were he took fist with his rat rod and i told him about the exhaust and was like o well i got a spare for that side for that reason sun did a brake job on my bros 88 chevy and went home and watched the race
__________________
http://img.photobucket.com/albums/v5...ropped/sig.jpg |
![]() |
![]() |
![]() |
#18 | |
Sb 400 club
Join Date: Nov 2005
Location: NH / MA
Posts: 2,746
|
Re: What did you get done? 11/05
Quote:
whats he got for a show truck? any pics
__________________
![]() ![]() 77 K10 Project / daily driver "The Grinch" http://67-72chevytrucks.com/vboard/s...d.php?t=318363 1956 Willys Wagon (327 chevy) Project (Now Buick 225) 1980 Corvette L-48 4 speed 1992 Mustang GT built 5.0 5 speed ![]() 1985 C10 LWB Sold 1982 K10 SWB plow truck Parted out 1986 D30 M1028 fire brush truck Parted out |
|
![]() |
![]() |
![]() |
#19 |
Registered User
Join Date: Jan 2005
Location: beaumont,tx
Posts: 757
|
Re: What did you get done? 11/05
__________________
http://img.photobucket.com/albums/v5...ropped/sig.jpg |
![]() |
![]() |
![]() |
#20 |
Spear and magic helmet!
Join Date: Oct 2006
Location: Nashville, TN
Posts: 1,226
|
Re: What did you get done? 11/05
Oil+filter change plus K&N filter recharge on Saturday. On Sunday I went with a buddy to go pick up a 64 VW Beetle sunroof parts car.
woot! |
![]() |
![]() |
![]() |
#21 |
Registered User
Join Date: Mar 2005
Location: 10-Uh-See
Posts: 5,609
|
Re: What did you get done? 11/05
Uhmm, I rearranged my living room.
![]() Oh Yeah! I changed the plugs in the 86 Sunday afternoon! ![]()
__________________
|
![]() |
![]() |
![]() |
#22 |
Rottenwood Garage Member
Join Date: May 2005
Location: Marietta, Georgia
Posts: 4,321
|
Re: What did you get done? 11/05
Worked on the "garagemahal" all weekend. Prepared the floor to pour concrete this week. Made sure the base gravel was flat and and the slab averaged 5 inches thick throughout. Put down moisture barrier and wire mesh. Also installed the meter base and electrical panel and wired them together along with a few outlets and lights. Commercial power should arrive this week also. I am about 30 days behind schedule but atleast I will have power and a floor before "true" Atlanta winter arrives (rain, more rain, cold rain, ice and then some more rain) In the words of Forest Gump..."one day it started raining.....and it didnt stop"
|
![]() |
![]() |
![]() |
#23 | |
Spear and magic helmet!
Join Date: Oct 2006
Location: Nashville, TN
Posts: 1,226
|
Re: What did you get done? 11/05
Quote:
Ooooooooo ![]()
__________________
-- Will |
|
![]() |
![]() |
![]() |
#24 |
Chevys Kick A$$
Join Date: Jan 2005
Location: Zootown, MT
Posts: 12,699
|
Re: What did you get done? 11/05
Not a whole lot, hung out with my bros and dad. Screwed around with the Cavy for a little while. Got the Blazer started and goofed around checking it out for a little while.
__________________
*HOODS is what I answer too* -'79, '77, '88 Pickup Sold, '85 Camaro, '83 T/A, '81,'83,'90 K5 Blazer All Sold ![]() -'79 3/4 ton "Big Yellow Bananna" Lifted 4spd. 39.5 TSL Swampers, The money Pit ![]() ![]() -'86 K5 Blazer Silverado 6.2 4" lift 35"s -'95 Ext. Cab Shorty 4" Tuff Country rolling 35" M/T's -'83 Monte Carlo T-Tops. 126,500 Original Miles -LATER ![]() I would rather push a Chevy then drive a ford!!
![]() |
![]() |
![]() |
![]() |
#25 |
Sb 400 club
Join Date: Nov 2005
Location: NH / MA
Posts: 2,746
|
Re: What did you get done? 11/05
Damm tha tis sweet
old school look to when did he build it ?
__________________
![]() ![]() 77 K10 Project / daily driver "The Grinch" http://67-72chevytrucks.com/vboard/s...d.php?t=318363 1956 Willys Wagon (327 chevy) Project (Now Buick 225) 1980 Corvette L-48 4 speed 1992 Mustang GT built 5.0 5 speed ![]() 1985 C10 LWB Sold 1982 K10 SWB plow truck Parted out 1986 D30 M1028 fire brush truck Parted out |
![]() |
![]() |
![]() |
Bookmarks |
|
|