|
11-13-2006, 02:02 PM | #1 |
The Engine Whisperer
Join Date: Sep 2006
Location: Ohio
Posts: 770
|
Couple of Questions
Wondering where people are getting the u-bolts that hold the rear end to the trailing arms. Also, what kind of bushings are people using on the trailing arms.
Also have a question about headers, I've been looking on Summit, and they seem to have a good deal on Tri-Y's but it says their for K30s with a big block. But I'm wondering will they work on a c10 with a big block in it? Thanks, PS68 P.S. here is a link to the headers I was looking at. http://store.summitracing.com/partde...5&autoview=sku Last edited by ProStreet68SB; 11-13-2006 at 02:11 PM. |
11-13-2006, 07:09 PM | #2 |
The Engine Whisperer
Join Date: Sep 2006
Location: Ohio
Posts: 770
|
Re: Couple of Qestions
ttt
|
11-13-2006, 07:46 PM | #3 |
Registered User
Join Date: Sep 2002
Location: DFW Texas
Posts: 2,269
|
Re: Couple of Qestions
I had my u bolts made at a local spring shop. (Ray's champion spring) cost $22. For the trailing arm bushings I used Prothane brand.
|
11-13-2006, 11:17 PM | #4 |
New Member
Join Date: Jun 2006
Location: Regina,Sk, Canada
Posts: 30
|
Re: Couple of Qestions
I ordered mine from ECE. I think they were $30. They're great to deal with.
http://www.earlyclassic.com |
11-14-2006, 07:52 PM | #5 |
Registered User
Join Date: Apr 2006
Location: Grandview WV
Posts: 41
|
Re: Couple of Qestions
I took my old u-bolts to a local large truck parts store (Truck City Inc) they matched them up with some longer ones, which I needed. $18.00 plus some change. Included 4 new new nuts too.
|
Bookmarks |
|
|