picture please-tach wire on firewall? - The 1947 - Present Chevrolet & GMC Truck Message Board Network

Daves72'GMC · 11-28-2006, 11:23 PM

I'm adding a tach to my truck and need a picture of the firewall(origional location) that shows where the tach wire comes out of the firewall to the hei,so I know where to drill the 3/4" hole on the firewall? Thank you

JimKshortstep4x4 · 11-29-2006, 06:12 AM

There is a series of dimples between the bulkhead connector and the E-brake cable hole as can be seen in the picture, (attached). The hole for the tach should be made using the dimple that is centered between the two larger holes.

Jim

Daves72'GMC · 11-29-2006, 05:37 PM

thank you very much for the picture.

11-28-2006, 11:23 PM	#1
Daves72'GMC Registered User Join Date: Mar 2003 Location: Asheville, N.C Posts: 952	picture please-tach wire on firewall? I'm adding a tach to my truck and need a picture of the firewall(origional location) that shows where the tach wire comes out of the firewall to the hei,so I know where to drill the 3/4" hole on the firewall? Thank you

11-29-2006, 06:12 AM	#2
JimKshortstep4x4 Senior Member Join Date: Jul 2001 Location: Muskegon,MI,USA Posts: 6,026	Re: picture please-tach wire on firewall? There is a series of dimples between the bulkhead connector and the E-brake cable hole as can be seen in the picture, (attached). The hole for the tach should be made using the dimple that is centered between the two larger holes. Jim Attached Images

11-29-2006, 05:37 PM	#3
Daves72'GMC Registered User Join Date: Mar 2003 Location: Asheville, N.C Posts: 952	Re: picture please-tach wire on firewall? thank you very much for the picture.



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.