|
|
|
12-31-2006, 01:43 PM
|
#1 |
|
Registered User
Join Date: Jul 2005
Location: AL
Posts: 1,828
|
vortec heads on a 283
I am wanting to find out if anyone on here has put vortec heads on a 283.
any input welcome.. thanx
__________________
" |
|
|
|
12-31-2006, 01:56 PM
|
#2 |
|
Registered User
Join Date: Dec 2006
Location: Wesley Chapel, Florida
Posts: 1,113
|
Re: vortec heads on a 283
I have done it on a 350 but not a 283. Those heads will work on any 283-400 sbc. You will need a new vortec style intake. It should have the same effect as any other sbc. More volume of A/F mix into the cylinders = more power.
|
|
|
|
|
12-31-2006, 02:03 PM
|
#3 |
|
Registered User
Join Date: Jul 2005
Location: AL
Posts: 1,828
|
Re: vortec heads on a 283
65-72,
thanks for the input... i have most of the components ( intake etc) sure wanted to make the 283 screame if i could...i have a couple of 350 and 327 blocks lying around... i thought i had read somewhere that the valves might make contact with the smaller diameter bore of the 283 block....
__________________
" |
|
|
|
|
12-31-2006, 02:50 PM
|
#4 |
|
Senior Member
Join Date: Dec 2004
Location: Southern Pines NC
Posts: 3,853
|
Re: vortec heads on a 283
it shouldn't, I would use the 283 head gasket to double check.
|
|
|
|
|
12-31-2006, 02:51 PM
|
#5 | |
|
Registered User
Join Date: Jul 2005
Location: AL
Posts: 1,828
|
Re: vortec heads on a 283
Quote:
thanks. good idea
__________________
" |
|
|
|
|
|
12-31-2006, 03:53 PM
|
#6 |
|
Fabricate till you "puke"
Join Date: Jun 2002
Location: Ill
Posts: 9,402
|
Re: vortec heads on a 283
The valves will clear the deck just fine.....he!!, you can run 2.02 /1.6 valves on a 3 7/8" bore, as long as you dont go past about .450 lift @ the valve. I sure dont reccomend that large a valve tho....doubt that you would gain anything, due to shrouding....
 L
__________________
69 longhorn,4" chop,3/5 drop, 1/2 ton suspension/disc brakes,1 1/2" body drop,steel tilt clip, 5.3/Edelbrock rpm intake/600 carb, Hooker streetrod shorties,2 1/2" exhaust/ H pipe/50's Flows , 6 spd Richmond trans,12 bolt/ 3.40 gears.... |
|
|
|
 |
| Bookmarks |
|
|
Hybrid Mode
