Anyone running Stainless Rear Disc's ? - The 1947 - Present Chevrolet & GMC Truck Message Board Network

f.monroe · 01-02-2007, 11:06 PM

I am looking at rear disc kits and Stainless Brakes (SSB?) has a kit for 73 - 87 trucks for $699 or so . Anyone have these and if so , how do you like them ? If you are running another brand kit , who made it and how do you like it ? Frank

ElGracho · 01-02-2007, 11:18 PM

Check this out...

http://www.gmtrucks.org/component/op...isc_brake_kits

I had them and then got rid of them. I'm going to put discs on my 86 project truck, but I'll be using the Impala SS/F body rear calipers, the Impala SS rotors and a disc/disc master cylinder. I'll get the brackets made and will stay away from cobbled together 'kits' like the one from SSBC.

bowtiecb · 01-02-2007, 11:31 PM

who makes the brackets

ElGracho · 01-02-2007, 11:38 PM

Read this thread for good info about rear discs:

http://67-72chevytrucks.com/vboard/s...d.php?t=180846

I don't know of anyone making the Impala caliper brackets, but with the picture in that thread, you can make them yourself.

01-02-2007, 11:06 PM	#1
f.monroe Senior Member Join Date: May 2004 Location: Caldwell,Tx. Posts: 3,648	Anyone running Stainless Rear Disc's ? I am looking at rear disc kits and Stainless Brakes (SSB?) has a kit for 73 - 87 trucks for $699 or so . Anyone have these and if so , how do you like them ? If you are running another brand kit , who made it and how do you like it ? Frank __________________ Born and proudly residing in a Red State !

01-02-2007, 11:18 PM	#2
ElGracho Gentleman Jim Driver Join Date: Nov 2002 Location: Poulsbo, WA Posts: 1,553	Re: Anyone running Stainless Rear Disc's ? Check this out... http://www.gmtrucks.org/component/op...isc_brake_kits I had them and then got rid of them. I'm going to put discs on my 86 project truck, but I'll be using the Impala SS/F body rear calipers, the Impala SS rotors and a disc/disc master cylinder. I'll get the brackets made and will stay away from cobbled together 'kits' like the one from SSBC. __________________ Joe '75 GMC Gentleman Jim '84 Chev C10 Short Wide - Super duper plain (manual steering, manual brakes, no dome light, no cig lighter) '85 Chev C10 Short Wide - Super plain Vortec 4.8 4L60E trans also: '81 K30, '83 C30 Crew Dually, '84 M1028 CUCV, '85 M1009 CUCV, another '85 C10 SWB, '89 R3500 Flatbed

01-02-2007, 11:31 PM	#3
bowtiecb Registered User Join Date: Oct 2006 Location: alabama Posts: 79	Re: Anyone running Stainless Rear Disc's ? who makes the brackets

01-02-2007, 11:38 PM	#4
ElGracho Gentleman Jim Driver Join Date: Nov 2002 Location: Poulsbo, WA Posts: 1,553	Re: Anyone running Stainless Rear Disc's ? Read this thread for good info about rear discs: http://67-72chevytrucks.com/vboard/s...d.php?t=180846 I don't know of anyone making the Impala caliper brackets, but with the picture in that thread, you can make them yourself. __________________ Joe '75 GMC Gentleman Jim '84 Chev C10 Short Wide - Super duper plain (manual steering, manual brakes, no dome light, no cig lighter) '85 Chev C10 Short Wide - Super plain Vortec 4.8 4L60E trans also: '81 K30, '83 C30 Crew Dually, '84 M1028 CUCV, '85 M1009 CUCV, another '85 C10 SWB, '89 R3500 Flatbed



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.