Norcal: 70 or 71 Jimmy parts rig

[masterbeavis]

Allow me to begin by saying....

I am not parting this thing out!

Individual parts are NOT for sale unless you buy the whole truck

Sold this to a friend many moons ago, now its been dumped back into my lap. Currently located in Manteca CA.

Here is a link to more pictures
http://s14.photobucket.com/albums/a3...black%20jimmy/




I am not parting this thing out. Maybe if I say it enough I will make myself clear.

Here is what the truck has:
This thing has axles under it, unlike the first pic, this is how I found the truck.
(this hardtop is GONE,and is not included, but I will give you the one that came off of my blazer, (had a hole cut in it for a vent)
Front and rear axles. Front is 3.08, rear is 3.08??
shortblock, trans and transfer case. Engine turns freely, no pitting, could hone and re-ring
Bare heads are
462624 1978-81 350 1.94 / 1.5 Z-28 Camaro
462624 1976-87 305 - 350 1.94 / 1.5 r 2.02 / 1.6
462624 1975-86 350 - 400 76cc chamber

Decent tub, with no rot thru. It has rust, but no holes I can see. Does have issues around the windshield at the middle hardtop bolts.


Good tailgate, has one dent on the side, can be straigtened. The fin is semi straight.



has a rear driveshaft, but no yoke on the t-case
good black visors

Uncut dash, NON AC


Comes with a radiator support for a 71 chevy and a few other parts I cant name at the moment

Here is what the truck doesn't have.
Seats
Front driveshaft
Good wiring under the hood.
Busted fiberglass at the heater box
grille
front bumper (cow pusher included)
seats
Working brakes. When axles were taken, the system drained. Assume the MC is bad, and replace it.
Exhaust system


Unknowns:
Title. I dont have it, but I am in contact with the last registered owner, so getting papers will be easy once there is somebody on the hook.

condition of gas tank. Dunno if its full of bad gas, or empty. I will be the first person to find out after you drop the tank and tell me :P

If trans and transfer work. They spin, thats all I know.

this is the history of the vehicle as I know it. The truck belonged to a machinist. He lost his vision, and could not drive anymore. The truck was parked at a relatives house, and tweakers robbed the grille, aluminum heads, and go fast goodies under the hood. Truck was traded for yada yada yada a couple of times, now I have it. It is not stolen, nor is in the DMV computer, so no back fees. I am asking 600, or best reasonable offer.

[masterbeavis]

[BigFishBobby]

Man, I need some vent windows w/ good frames. If you part that thing out and the windows will fit my '69 C10, let me know.

[masterbeavis]

71Jimmy: The bucket seats are trashed. They were not bolted in, and are not the correct color for this rig. I assume they were for this rig, but I would have to try and install them to find out. (could be '73 or newer seats)

Bigfishbobby: I just gave a set of doors away that had good vent parts, but nasty skins. Oh well. I have a couple more sets of doors kicking around, that once I get around to it, I will be dumping/hacking up. I must warn you however, that it wont be anytime soon, and once it does happen, I suck at shipping in a timely manner.

[71jimmy]

[QUOTE=masterbeavis;1976825]71Jimmy: The bucket seats are trashed. They were not bolted in, and are not the correct color for this rig. I assume they were for this rig, but I would have to try and install them to find out. (could be '73 or newer seats)

Just my luck. I'm using a seat from a '74 now. Thanks for the reply.

[EFI70Blazer]

How much shipped to 97801 for the power brake booster support brackets?

[EFI70Blazer]

Also do you have these brackets and would you be willing to sell them?

[bad_turbo]

trade ya a '67 burb 4x4

[69TowRig]

I see Blue-dial locking hubs. What condition are the dials in? And if they are in VG condition would you part them?

[LUV2XCLR8]

Is either one of the Fender badges in good condition, hard to tell from pic's

[masterbeavis]

one badge is in good shape, the other is missing the "MY" part of the foil.
The hubs don't have any channel lock marks on them.
The gas pedal assembly is the cable style, 71-71 type.

[agronomya]

OK, thanks anyways man.

[masterbeavis]

My friend who bought this from me wants it out of his yard, I am stuck with this thing again......

[Rochlow]

How is the radiator support under the battery? Is it rusted?

[ConnDemned]

How much for the back bumper brackets?

[bigbluthng]

pm sent. interested in the whole thing but had specific questions about the frame and susp. thanks

[ConnDemned]

Sorry thought you were parting it since everyone was asking about other parts. Guess I should have read it better. Hope you the best on its sale.

[masterbeavis]

no worries, three years ago I was entertaining the idea of parting it out if it did not sell as an entire unit. If it continues to sit, I will take motor/trans and linkages out and sell off carcass.

[masterbeavis]

[BIGJAKE97]

hey tony. so how much do you want for the jimmy this time around? is it a driver now? how much without engine/tranny/transfer? -jake

if you remeber, i bought those blazer bucket seats from you back in november of 2008.

[masterbeavis]

Originally Posted by BIGJAKE97

hey tony. so how much do you want for the jimmy this time around? is it a driver now? how much without engine/tranny/transfer? -jake

if you remeber, i bought those blazer bucket seats from you back in november of 2008.

the truck is the same as it was back when I got it, except it will roll now. It would be great to see the seats re-united with the truck they came from. For you I will even throw in the center console that came out of the truck too!

I am on the fence about keeping the motor/trans/tcase and parts to swap my blazer to a 4 speed, so here is the pricing break down. Everything is Caveat Emptor (let the buyer beware)

$400 without that junk, includes tub, top, axles, all pictured sheet metal, whatever is not related to a auto to stick conversion

$600 for everything you see in the pictures attached to the truck.

Just a note, I have to take the antenna mounts and add a leafs off of the truck before it gets sold to return those items to the previous owner. I feel obliged to return them as it was part of the original deal between the original owner and the guy who bought it (the guy I got it from).

For anyone, if you like doing buisness over the phone, my number is (916) 275-6764, my name is Tony

[BIGJAKE97]

tony- i'm very interested. i'll call you later. -jake

[71jimmy]

From the first pic, it looks like its got the front seats. I'm in need of a front drivers bucket with tracks. If you decide to part it put me in line first please.

I'm in Fair Oaks, just a stones throw from ya (if you have a good arm).

[71jimmy]

Oh sorry, I didn't think you were selling parts off it just yet. I would be interested in the drivers seat if it is rebuildable and has the tracks. It must be for a '71/'72 and not the utility buckets. The '73 up seats are slightly different and the tracks will not fit the mounting holes. I currently have a '74 seat, so I know, already went down that road.

If you could post or email some pics, so I can get a general idea of what they are like. My email address is rolandkutz@comcast.net. And include your asking price.

Thanks

[masterbeavis]

ttt