before and after Pics - The 1947 - Present Chevrolet & GMC Truck Message Board Network

ClassicRedneck05 · 01-08-2007, 10:29 PM

heres a few pix of the before & after pix of my painless Re-wire (underhood only) more to come

ClassicRedneck05 · 01-08-2007, 10:30 PM

last 2 from the top thread more pix to come

cstm68 · 01-08-2007, 11:01 PM

nice job i used the same kit on my 68 swb.

i just have one question. where the wires for the tail light section come from the frame to the bed. did u replace the rubber gromet that allowes you to disconnect the rear section at the bed for removing the bed or did you just leave it how it came in the kit??

ClassicRedneck05 · 01-08-2007, 11:48 PM

Quote:

Originally Posted by cstm68

nice job i used the same kit on my 68 swb.

i just have one question. where the wires for the tail light section come from the frame to the bed. did u replace the rubber gromet that allowes you to disconnect the rear section at the bed for removing the bed or did you just leave it how it came in the kit??

well my kit i didnt have the rear dissconnet in the new kit it was on the old harness but it was still good from the old harness so i reused it i will post some pix of how i ran all of that tomorrow during the day

cstm68 · 01-09-2007, 07:14 PM

what did u do about the extra wires my new kit has more wires than the stock harness?

ClassicRedneck05 · 01-09-2007, 11:42 PM

Quote:

Originally Posted by cstm68

what did u do about the extra wires my new kit has more wires than the stock harness?

well i got the 18circuit harness because i plan on having power windows and locks but hidden switches to still keep the original look asnd electric fan but i dont plan on puttin that on anytime soon if i do at all which extras did you have?

cstm68 · 01-10-2007, 10:23 PM

i have the same 18 circuit harness with power windows and remote locks. but the tail light harness has more wires that would go through the disconect that the origanal has spots for?

ClassicRedneck05 · 01-11-2007, 02:40 AM

Quote:

Originally Posted by cstm68

i have the same 18 circuit harness with power windows and remote locks. but the tail light harness has more wires that would go through the disconect that the origanal has spots for?

i noticed the same thing as well i forget how i did it remind me tomorrow and i will takwe a loko how i did it and snap some pix for u to maybe help ya out

72armyswbtruck · 01-11-2007, 10:46 AM

Nice how long did it take you to do?

67ChevyRedneck · 01-11-2007, 11:09 AM

Quote:

Originally Posted by 72armyswbtruck

Nice how long did it take you to do?

And how "painless" was it really?

Was it difficult or fairly straight forward to install?

ClassicRedneck05 · 01-11-2007, 01:51 PM

Quote:

Originally Posted by 72armyswbtruck

Nice how long did it take you to do?

took me a ittle over 2 weeks because i did not work on it every dsay total work days maybe a week and it was NOT PAINLESS lol i hated it and wierd thing is im an electronic wiz lol but i still had trouble its still not done either i cant figure out why my right blinker doens work and i havnt got the ac hoked up

cstm68 · 01-11-2007, 03:11 PM

mine when in smooth and easy. i just had trouble with the maxi fuse and headlight switch i had to switch around the wires in the clip that came on the new harness to connect to the old switch.

65-72 chevytoys · 01-11-2007, 03:24 PM

Looks nice and clean.

01-08-2007, 10:29 PM	#1
ClassicRedneck05 Senior Member Join Date: Dec 2005 Location: Humble, Texas Posts: 262	before and after Pics heres a few pix of the before & after pix of my painless Re-wire (underhood only) more to come Attached Images

01-08-2007, 10:30 PM	#2
ClassicRedneck05 Senior Member Join Date: Dec 2005 Location: Humble, Texas Posts: 262	Re: before and after Pics last 2 from the top thread more pix to come Attached Images

01-08-2007, 11:01 PM	#3
cstm68 Registered User Join Date: Jan 2007 Location: shoreline, wa Posts: 1,565	Re: before and after Pics nice job i used the same kit on my 68 swb. i just have one question. where the wires for the tail light section come from the frame to the bed. did u replace the rubber gromet that allowes you to disconnect the rear section at the bed for removing the bed or did you just leave it how it came in the kit??

01-09-2007, 07:14 PM	#5
cstm68 Registered User Join Date: Jan 2007 Location: shoreline, wa Posts: 1,565	Re: before and after Pics what did u do about the extra wires my new kit has more wires than the stock harness?

01-10-2007, 10:23 PM	#7
cstm68 Registered User Join Date: Jan 2007 Location: shoreline, wa Posts: 1,565	Re: before and after Pics i have the same 18 circuit harness with power windows and remote locks. but the tail light harness has more wires that would go through the disconect that the origanal has spots for?

01-11-2007, 10:46 AM	#9
72armyswbtruck Registered User Join Date: Feb 2004 Location: Idaho Posts: 4,033	Re: before and after Pics Nice how long did it take you to do? __________________ "Remember, They can Kill You, but they can't eat You, That's against the law!!!!!!!!!"

01-11-2007, 03:11 PM	#12
cstm68 Registered User Join Date: Jan 2007 Location: shoreline, wa Posts: 1,565	Re: before and after Pics mine when in smooth and easy. i just had trouble with the maxi fuse and headlight switch i had to switch around the wires in the clip that came on the new harness to connect to the old switch.

01-11-2007, 03:24 PM	#13
65-72 chevytoys Registered User Join Date: Dec 2006 Location: Wesley Chapel, Florida Posts: 1,113	Re: before and after Pics Looks nice and clean.



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.