looking for firewall pics - The 1947 - Present Chevrolet & GMC Truck Message Board Network

pharcyde05 · 01-10-2007, 07:54 PM

ok well there are a lot of holes on the firewall and i anm trying to find out what they are used for some i alredy know and some i just cant place so if anyone has pic of what there firewalls look like i can start to place where everything runs throughand what they are used for
thanks Jeremy

feel free to post custom firewalls also would love to see some of the great work the members have done

jugernot · 01-10-2007, 08:34 PM

I know there is a picture floating around the had all the holes maked, But I can't find it.

boogie67 · 01-10-2007, 08:48 PM

Heres one of my firewall on my 67.I did this all by myself.I think its not bad for never doing body work or welding.

**VetteVet** · 01-10-2007, 09:19 PM

Is this what you want? I don't remember who posted them originally but I thank them for the excellent pics.

http://67-72chevytrucks.com/vboard/a...4&d=1168475836

http://67-72chevytrucks.com/vboard/a...4&d=1168475836

abadsvt · 01-11-2007, 02:25 AM

Now i have a question. What holes can one weld up without screwing him self when it comes time to install the stuff again. Also what can you relocate without an outragous amount of work. For example. Like the fuse block. Were could one relocate it? Also is there a way you can run the speedometer cable in a different spot? I am would like to clean up the firewall as much as i possible can. Thanks Josh and soory to:tj:

Flat 67 · 01-11-2007, 04:06 AM

Quote:

Originally Posted by pharcyde05

feel free to post custom firewalls also would love to see some of the great work the members have done

So you want to see custom firewalls..........Flat67

http://67-72chevytrucks.com/vboard/s...d.php?t=181376

AKChevyman · 01-11-2007, 08:37 AM

here is my simple shave

pharcyde05 · 01-11-2007, 12:51 PM

Sandemonium · 01-12-2007, 04:25 PM

On the picture above it shows a hole that is labled Trans linkage.

Is that hole needed for an Automatic Transmission that will be using a tilt Ididit column shift?

I wouldn't think so, but before I fill the hole I wanted to check with the experts.

Thank you,

Bob

01-10-2007, 07:54 PM	#1
pharcyde05 Senior Member Join Date: Mar 2006 Location: modesto CA Posts: 239	looking for firewall pics ok well there are a lot of holes on the firewall and i anm trying to find out what they are used for some i alredy know and some i just cant place so if anyone has pic of what there firewalls look like i can start to place where everything runs throughand what they are used for thanks Jeremy feel free to post custom firewalls also would love to see some of the great work the members have done __________________ http://www.cardomain.com/ride/2461088

01-10-2007, 08:34 PM	#2
jugernot Life, Be In It..... Join Date: Oct 2003 Location: Novato, California Posts: 1,498	Re: looking for firewall pics I know there is a picture floating around the had all the holes maked, But I can't find it. __________________ Project Name: LEMON DROP. Reconstruction started "December 2000". Projected completion date "Who knows" http://67-72chevytrucks.com/vboard/s...d.php?t=200082

01-10-2007, 08:48 PM	#3
boogie67 Registered User Join Date: Mar 2005 Location: waco tx Posts: 584	Re: looking for firewall pics Heres one of my firewall on my 67.I did this all by myself.I think its not bad for never doing body work or welding. Attached Images __________________ 77 swb starting all over again. Last edited by boogie67; 01-10-2007 at 08:49 PM.

01-10-2007, 09:19 PM	#4
VetteVet Msgt USAF Ret Join Date: Jan 2005 Location: Kalamazoo, Michigan Posts: 8,723	Re: looking for firewall pics Is this what you want? I don't remember who posted them originally but I thank them for the excellent pics. http://67-72chevytrucks.com/vboard/a...4&d=1168475836 http://67-72chevytrucks.com/vboard/a...4&d=1168475836 Attached Images __________________ VetteVet metallic green 67 stepside 74 corvette convertible 1965 Harley sportster 1995 Harley wide glide Growing old is hell, but it beats the alternative. Last edited by VetteVet; 01-10-2007 at 11:18 PM.

01-11-2007, 02:25 AM	#5
abadsvt Senior Member Join Date: Aug 2006 Location: Atascadero, CA Posts: 1,152	Re: looking for firewall pics Now i have a question. What holes can one weld up without screwing him self when it comes time to install the stuff again. Also what can you relocate without an outragous amount of work. For example. Like the fuse block. Were could one relocate it? Also is there a way you can run the speedometer cable in a different spot? I am would like to clean up the firewall as much as i possible can. Thanks Josh and soory to:tj: __________________ (Project truck) 1970 C10 under complete transformation My current build thread http://67-72chevytrucks.com/vboard/s...d.php?t=212871 Other project: C5 corvette swap into 70 c10 http://67-72chevytrucks.com/vboard/s...=1#post2413517 On Hold

01-11-2007, 08:37 AM	#7
AKChevyman Chevy Forever Join Date: Jun 2005 Location: Dalzell SC Posts: 314	Re: looking for firewall pics here is my simple shave Attached Images __________________ My first love 1971 C20 Hugger orange Getting face lift and heart transplant .30 402 BB /TH400 and GV Wifes car 1969 Chevelle SS 396 325hp/TH400 Factroy A/C Automatic w/ Floor shift console. restored.

01-11-2007, 12:51 PM	#8
pharcyde05 Senior Member Join Date: Mar 2006 Location: modesto CA Posts: 239	Re: looking for firewall pics __________________ http://www.cardomain.com/ride/2461088

01-12-2007, 04:25 PM	#9
Sandemonium Proud owner of a 55.1 AD Join Date: Oct 2006 Location: Desert Hills, AZ Posts: 460	Re: looking for firewall pics On the picture above it shows a hole that is labled Trans linkage. Is that hole needed for an Automatic Transmission that will be using a tilt Ididit column shift? I wouldn't think so, but before I fill the hole I wanted to check with the experts. Thank you, Bob



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.