|
|
|
01-13-2007, 09:39 PM
|
#1 |
|
Adam B
Join Date: Jul 2005
Location: Westfield
Posts: 151
|
Tighten Tilt Column?
Ok, I am installing a 72 Blazer Tilt column in my '68 C-10 truck. The tilt part of the column is very tight and works great. The tilt action is very firm, but the steering wheel is not firm and gives me 1/8 inch of movement in any direction.
I have just installed new steering u-joints and everything on this part is firm and in place. So I don't think it is this far down? Is there a part of the column that needs tighten up or something? A bearing replaced or bolts tighten up?? Any help would be appreciated. Adam |
|
|
|
01-14-2007, 06:15 PM
|
#2 |
|
its all about the +6 inches
Join Date: Jan 2001
Location: Hilliard Ohio
Posts: 2,690
|
Re: Tighten Tilt Column?
from your description, you need some front end work
|
|
|
|
|
01-14-2007, 06:22 PM
|
#3 |
|
member #16
 
Join Date: Dec 1999
Location: Yuba City Ca.
Posts: 3,618
|
Re: Tighten Tilt Column?
The tilt columns have tapered bearings at the top. I dont remember the size but it takes a deep socket. That will usually get rid of the slack. Might not hurt to see if there is any lube left.
__________________
john http://67-72chevytrucks.com/vboard/showgroups.php board vendors  http://www.flickr.com/photos/1745471...7602865984234/ Last edited by john; 01-14-2007 at 06:23 PM. |
|
|
|
 |
| Bookmarks |
|
|
Hybrid Mode
