What did y'all get done this weekend? - The 1947 - Present Chevrolet & GMC Truck Message Board Network

1969k10stepside · 01-21-2007, 11:35 PM

I removed the rear spring hangers from my swb 4x4 and watched the colts win the game so they can go to the superbowl

byrd · 01-21-2007, 11:52 PM

I installed a int reg alt on my 69, headlight relay harness, and new bulbs. I can see now!!!

poorboy · 01-21-2007, 11:55 PM

I helped abdsvt on his truck. Got alot of work done on my racecar. Didn't touch my truck.

jimmydean · 01-21-2007, 11:56 PM

I installed a new fuel pump (2nd one in 6 months), wired a over-ride switch for my compressor, and installed the lights for my air gauges.

**SactoJim** · 01-22-2007, 12:14 AM

Over the last few weekends got the motor started and broke in the cam....Sounds fricken great! Took some video, but haven't figured out how to get it on my computer. I haven't driven this thing for about 8 years and I'm gettin closer. This weekend I cut and rubbed out the cab and set it back on the chassis for the LAST TIME!!!!

stllookn · 01-22-2007, 12:16 AM

Got rid of my '67 parts truck and got a badly needed part for my Longhorn restoration.

CG · 01-22-2007, 01:09 AM

Quote:

Originally Posted by stllookn

Got rid of my '67 parts truck and got a badly needed part for my Longhorn restoration.

That looks like the one I picked up...Im confused now.

IvelDesigns · 01-22-2007, 01:24 AM

I went from this:

To this:

Was most concerned about getting the framerails looking decent. I have new T arms on the way, and will be getting a new parhard bar, bags, c-notch and shocks in soon. Getting it painted was more of a preparation than anything.

oh, and i cut the exhaust off just behind the cab to get it out of the way for future work.

stllookn · 01-22-2007, 02:49 PM

Quote:

Originally Posted by CG

That looks like the one I picked up...Im confused now.

LOL...yours was ochre...mine is gold even though they came from the same guy! It was good to see you again.

CG · 01-22-2007, 03:40 PM

Quote:

Originally Posted by stllookn

LOL...yours was ochre...mine is gold even though they came from the same guy! It was good to see you again.

Whew...I thought maybe it fell of the trailer and my son didnt bother to tell me, and you came along and picked it up.

ND_guy · 01-22-2007, 04:16 PM

Hung a new 2 1/4" dual exhaust system. No more straight pipes dumping below cab!!! Best $140 bucks I've spent yet. Installed new stereo and speakers. Bumped the timing up 2degrees. Then drove the wheels off of it

corn · 01-22-2007, 12:16 AM

im redoing my cluster (again). Got a good start on it.

65-72 chevytoys · 01-22-2007, 12:24 AM

Fixed a flat from picking up a nail, checked the rear brake pads while off so not much on the truck. Got the garage cleaned and organized for preping to seal the floor before I bring home the new toy.

Damn Jim that engine looks great.

GREASEMONKEY72 · 01-22-2007, 12:31 AM

me and my bro went to the local racecar swapmeet and sold a few things and got a few things and just hung out and talked with buddies and today i did a compression test and leak down test on my truck and going to replace the valve seals tomorrow and hope it helps with my oil burning problem

*trkklr77* · 01-22-2007, 12:33 AM

the only thing i got done on the shory is waste gas

and mount up my new 8-454 badges from chevy land

ironicaly, this is post 454 for me ?!?!?!?

woodridge · 01-22-2007, 12:30 AM

I got a good start on cleaning up aroung the shop, there is actually room to pull in and turn around with the trailer.

Rollie396 · 01-22-2007, 12:59 AM

I drove all over the place (1600kms in total)in order to get the bed parts I needed and started to cut things up in order to raise the bed floor 2 1/4".
I was very impressed with the front panel and the rear cross sill.They fit right in place,no fuss no muss.

FarmTruk · 01-22-2007, 01:12 AM

Split about 4 cords of firewood, and cleaned some old roots out of the new dirt supporting my new rock wall.

cstm68 · 01-22-2007, 01:34 AM

got a good start on my new gas tank
"wow my arms are sore from that air chisel"

pissonNOS · 01-22-2007, 01:37 AM

well I really didnt accomplish anything, but i did get some information on some bags which will hopefully be ordered in the next few weeks

IvelDesigns · 01-22-2007, 01:42 AM

i forgot the most important thing i accomplished this weekend. I finished wiring all of the lights in the garage. Now i have 7 light sockets, with 2 100 watt bulbs in each of them to help me see the light...

all are on one switch, but have pull chains to turn off unneeded lights.

freakin bright in there with all of them on.

gouldie · 01-22-2007, 01:48 AM

got new wiring for the tail lights in. they still dont work because of a bad ground. once i get the problem solved it'll be on the road.

RetroSBK · 01-22-2007, 02:54 AM

Broke in the new motor, first on the street, then the dyno. Drove about 300 miles on her and decided my exhaust is WAY too loud... (series 30 flowmasters, 3" to week burner exits)

put together the rest of the parts to pull the front end off in two weeks (gotta work a bit!) and powdercoat it, made measurements for the silicone hose set, and spent about 20 hours trying to figure out what wheels I want to end up with...

Still didnt get ANY pics of the truck, and still need a center to center measurement on an OE panhard bar!

breeh · 01-22-2007, 03:00 AM

Replaced my old rubber body mounts with some poly pieces...

jbon64 · 01-22-2007, 08:14 AM

drove to southern tennessee to check out a 72 SWB

01-21-2007, 11:35 PM	#1
1969k10stepside Registered User Join Date: Mar 2006 Location: USA Posts: 21,019	What did y'all get done this weekend? I removed the rear spring hangers from my swb 4x4 and watched the colts win the game so they can go to the superbowl

01-21-2007, 11:55 PM	#3
poorboy Senior Member Join Date: Jun 2006 Location: Oregon City, Or Posts: 758	Re: What did y'all get done this weekend? I helped abdsvt on his truck. Got alot of work done on my racecar. Didn't touch my truck.

01-21-2007, 11:56 PM	#4
jimmydean Registered User Join Date: May 2005 Location: Beaverton, OR Posts: 3,728	Re: What did y'all get done this weekend? I installed a new fuel pump (2nd one in 6 months), wired a over-ride switch for my compressor, and installed the lights for my air gauges.

01-22-2007, 12:14 AM	#5
SactoJim Registered User Join Date: Oct 2005 Location: Sacramento, CA Posts: 1,970	Re: What did y'all get done this weekend? Over the last few weekends got the motor started and broke in the cam....Sounds fricken great! Took some video, but haven't figured out how to get it on my computer. I haven't driven this thing for about 8 years and I'm gettin closer. This weekend I cut and rubbed out the cab and set it back on the chassis for the LAST TIME!!!! __________________ 72 Cheyenne SWB Fleet Nut & bolt frame off in progress...99.9999% - supercharged 383 - 4 wheel discs - relocated fuel tank - My Build Thread Last edited by SactoJim; 10-04-2007 at 05:19 PM.

01-22-2007, 12:16 AM	#6
stllookn Saving 1 truck at a time! Join Date: Aug 2001 Location: Kent, WA Posts: 6,465	Re: What did y'all get done this weekend? Got rid of my '67 parts truck and got a badly needed part for my Longhorn restoration. Attached Images __________________ '68 C20 Longhorn 50th Anniversary 400/TH400 '68 C20 Longhorn 50th Anniversary 468/TH400w/buckets '72 C20 Halfhorn (Longhorn w/o cab and front clip) '69 Flxible Cruiser (look up ugly in the dictionary)

01-22-2007, 01:24 AM	#8
IvelDesigns Commander Taco Bello Join Date: Sep 2006 Location: Des Moines, Iowa Posts: 2,232	Re: What did y'all get done this weekend? I went from this: To this: To this: Was most concerned about getting the framerails looking decent. I have new T arms on the way, and will be getting a new parhard bar, bags, c-notch and shocks in soon. Getting it painted was more of a preparation than anything. oh, and i cut the exhaust off just behind the cab to get it out of the way for future work. __________________ Bagged '50 3600 - Bumper punchin' road kill since 2009... Bagged '69 C10 Longbed - Bumper punchin' road kill since 2007... Last edited by IvelDesigns; 01-22-2007 at 01:37 AM.

01-22-2007, 04:16 PM	#11
ND_guy Tool Addiction=Money Shortage Join Date: Mar 2006 Location: Grand Forks, ND Posts: 233	Re: What did y'all get done this weekend? Hung a new 2 1/4" dual exhaust system. No more straight pipes dumping below cab!!! Best $140 bucks I've spent yet. Installed new stereo and speakers. Bumped the timing up 2degrees. Then drove the wheels off of it

01-22-2007, 12:16 AM	#12
corn Registered User Join Date: Dec 2003 Location: here Posts: 5,789	Re: What did y'all get done this weekend? im redoing my cluster (again). Got a good start on it.

01-22-2007, 12:24 AM	#13
65-72 chevytoys Registered User Join Date: Dec 2006 Location: Wesley Chapel, Florida Posts: 1,113	Re: What did y'all get done this weekend? Fixed a flat from picking up a nail, checked the rear brake pads while off so not much on the truck. Got the garage cleaned and organized for preping to seal the floor before I bring home the new toy. Damn Jim that engine looks great. __________________ 2004 Chevy Silverado 1500LS SWB 5.3L 2004 Corvette Z16 #770 Wish I had not sold 72 blazer

01-22-2007, 12:31 AM	#14
GREASEMONKEY72 Registered User Join Date: Aug 2006 Location: Bakersfield,CA Posts: 7,893	Re: What did y'all get done this weekend? me and my bro went to the local racecar swapmeet and sold a few things and got a few things and just hung out and talked with buddies and today i did a compression test and leak down test on my truck and going to replace the valve seals tomorrow and hope it helps with my oil burning problem __________________ -steven Alte Seele S.S. "Allison" '72 C/10 LWB 350SB/TH350 - DD PITBULL IS NOT A CRIME

01-22-2007, 12:33 AM	#15
trkklr77 Account Suspended Join Date: Aug 2006 Location: vacaville ca, because it as far from indy as i can be Posts: 775	Re: What did y'all get done this weekend? the only thing i got done on the shory is waste gas and mount up my new 8-454 badges from chevy land ironicaly, this is post 454 for me ?!?!?!? Last edited by trkklr77; 01-22-2007 at 12:35 AM.

01-22-2007, 12:30 AM	#16
woodridge Senior Member Join Date: Feb 2005 Location: Maynardville, Tn Posts: 3,030	Re: What did y'all get done this weekend? I got a good start on cleaning up aroung the shop, there is actually room to pull in and turn around with the trailer. __________________ SEMA Network- Protect our Hobby! 71 C30 in pieces, starting to come together. Click here for A Place For Tennessee Truck Enthusiest To Meet

01-22-2007, 12:59 AM	#17
Rollie396 someday it will be done! Join Date: Sep 2004 Location: Lloydminster,AB. Canada Posts: 1,620	Re: What did y'all get done this weekend? I drove all over the place (1600kms in total)in order to get the bed parts I needed and started to cut things up in order to raise the bed floor 2 1/4". I was very impressed with the front panel and the rear cross sill.They fit right in place,no fuss no muss. Attached Images __________________ '72 C-10 Proud owner of a million new and used pieces that used to be and will once again be(god willing) a testament to the term "they don't build em like that anymore. '80 LWB 2wd beater '67 GMC long fleet (cab donor) '66 long step (parked till it's turn comes around) '65 short step (parts truck that will donate it's bed and possibly frame to the '66) '06 Grand Prix wife's car (she hardly lets me touch it) my pics

01-22-2007, 01:12 AM	#18
FarmTruk In Memoriam... Join Date: Nov 2006 Location: Wallburg, NC Posts: 1,216	Re: What did y'all get done this weekend? Split about 4 cords of firewood, and cleaned some old roots out of the new dirt supporting my new rock wall. __________________ '68 C10 SWB 307ci 2BBL *FarmTruk Pics Here* *"You know, doing what is right is easy. The problem is knowing what is right."*

01-22-2007, 01:34 AM	#19
cstm68 Registered User Join Date: Jan 2007 Location: shoreline, wa Posts: 1,565	Re: What did y'all get done this weekend? got a good start on my new gas tank "wow my arms are sore from that air chisel" Attached Images



Register or Log In To remove these advertisements.

01-22-2007, 01:37 AM	#20
pissonNOS senior member Join Date: Feb 2003 Location: fort macleod alberta Posts: 2,770	Re: What did y'all get done this weekend? well I really didnt accomplish anything, but i did get some information on some bags which will hopefully be ordered in the next few weeks __________________ 69 GMC bagged

01-22-2007, 01:42 AM	#21
IvelDesigns Commander Taco Bello Join Date: Sep 2006 Location: Des Moines, Iowa Posts: 2,232	Re: What did y'all get done this weekend? i forgot the most important thing i accomplished this weekend. I finished wiring all of the lights in the garage. Now i have 7 light sockets, with 2 100 watt bulbs in each of them to help me see the light... all are on one switch, but have pull chains to turn off unneeded lights. freakin bright in there with all of them on. __________________ Bagged '50 3600 - Bumper punchin' road kill since 2009... Bagged '69 C10 Longbed - Bumper punchin' road kill since 2007...

01-22-2007, 01:48 AM	#22
gouldie Registered User Join Date: Oct 2006 Location: daytona beach Posts: 101	Re: What did y'all get done this weekend? got new wiring for the tail lights in. they still dont work because of a bad ground. once i get the problem solved it'll be on the road. __________________ 67 c10 250 I6 3 on the tree no options air ride, paint and big block coming within the next 23 years 2001 mustang gt for going fast

01-22-2007, 02:54 AM	#23
RetroSBK Registered User Join Date: Jan 2007 Location: Camarillo, CA Posts: 64	Re: What did y'all get done this weekend? Broke in the new motor, first on the street, then the dyno. Drove about 300 miles on her and decided my exhaust is WAY too loud... (series 30 flowmasters, 3" to week burner exits) put together the rest of the parts to pull the front end off in two weeks (gotta work a bit!) and powdercoat it, made measurements for the silicone hose set, and spent about 20 hours trying to figure out what wheels I want to end up with... Still didnt get ANY pics of the truck, and still need a center to center measurement on an OE panhard bar! __________________ 1970 C10, shortened long bed, Alum Headed full roller 383 (with Victor, 750DP, stainless rockers, behive springs, CNC ported heads) TCI SSF 700R4, 4.10 Posi, Bagged on C-Notch and 2.5 spindles. Air Cond, black out tint, satin black paint, custom interior, rolling low and not so slow...

01-22-2007, 03:00 AM	#24
breeh Recovering 67-72 Addict Join Date: Oct 2000 Location: North Bend, WA Posts: 1,788	Re: What did y'all get done this weekend? Replaced my old rubber body mounts with some poly pieces... __________________ 68 Short Fleet 4x4; 427; BTO Level 3 700R4; NP205; Dana 60 front and rear; 4" lift with 35's; Disc brakes; AGR variable ratio steering; factory bucket seats; factory tach and tilt. "Friends call me cruzer cuz I like fast cars and fast women"

01-22-2007, 08:14 AM	#25
jbon64 Registered User Join Date: Jan 2006 Location: sidney , illinois Posts: 312	Re: What did y'all get done this weekend? drove to southern tennessee to check out a 72 SWB __________________ hey.....smell my finger 64 nova wagon , 63 nova convertible

Register or Log In To remove these advertisements.