Bolts from the fender to the well... - The 1947 - Present Chevrolet & GMC Truck Message Board Network

COACHMEASON · 01-29-2007, 10:08 PM

Cant stand how the bolts "stick out" from the well...What can I use for a smoother look...

ghetto_superman · 01-30-2007, 01:11 AM

A whole crap load of pop rivets?

Or maybe some carriage bolts.. but those have the square lug on the inside so they'd still stick out...

nothing else comes to mind short of spot welds.....

Longhorn Man · 01-30-2007, 06:10 AM

do they make phillips head screws with a 3/8 inch shank?
They'd never cpome off after a year on the road though.

speedracer · 01-30-2007, 02:37 PM

I used stainless button head allen bolts I bought at home depot

70c10 · 01-30-2007, 03:36 PM

Everything looks better with button head bolts!

01-29-2007, 10:08 PM	#1
COACHMEASON Keep On Keepin' On Join Date: Apr 2006 Location: Oklahoma Posts: 417	Bolts from the fender to the well... Cant stand how the bolts "stick out" from the well...What can I use for a smoother look...

01-30-2007, 01:11 AM	#2
ghetto_superman Registered User Join Date: Sep 2006 Location: Omaha, NE Posts: 1,982	Re: Bolts from the fender to the well... A whole crap load of pop rivets? Or maybe some carriage bolts.. but those have the square lug on the inside so they'd still stick out... nothing else comes to mind short of spot welds..... __________________ -1947 3100 -1968 C10 -1970 K20 Last edited by ghetto_superman; 01-30-2007 at 01:11 AM.

01-30-2007, 06:10 AM	#3
Longhorn Man its all about the +6 inches Join Date: Jan 2001 Location: Hilliard Ohio Posts: 2,693	Re: Bolts from the fender to the well... do they make phillips head screws with a 3/8 inch shank? They'd never cpome off after a year on the road though.

01-30-2007, 02:37 PM	#4
speedracer Blank Join Date: May 2005 Location: Southington, CT Posts: 221	Re: Bolts from the fender to the well... I used stainless button head allen bolts I bought at home depot __________________ 1969 lwb 4/6 drop 17x8-18x10 torque thrust II's 327-420hp 2004R 3.73 posi. 1977 Corvette 350-375hp 4speed, silver show car. 2002 S10 xtreme, work truck 2004.5 VW jetta GLI 1.8T 6speed, weekend warrior. 2013 Audi A3 TDI, the wife's car

01-30-2007, 03:36 PM	#5
70c10 67-72 Addict! Join Date: Feb 2002 Location: The TAX State! Posts: 7,857	Re: Bolts from the fender to the well... Everything looks better with button head bolts! __________________ Jim 1970 C/10 Fleetside w/Ghost Flames Lowered 4.5" front and 4" rear (Raked) 355/350 Turbo w/shift kit 10" Redneck Performance Verter w/2500 stall Hooker Super Comps part#2808-1 Performer RPM Air-Gap 12 Bolt w/3:73 gears- Eaton Posi Comp Cams XE262 with 1.6 Crane Energizers, Road Demon 625 and Brodix IK 180 heads



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.