|
|
|
02-06-2007, 04:19 PM
|
#1 |
|
village idiot
Join Date: Oct 2006
Location: Barbourville,KY
Posts: 176
|
frame ????????????
is the 67 frame the same as a 60-66 frame?
I know theres a bit of difference in the 67 and a 68-72.I'm looking for a passenger side frame mount for a 292 I6,the part that goes from the frame to the motor mount.I think all 67-72 292 mounts are the same,just need to know if the 60-66 will work too. thanks |
|
|
|
02-06-2007, 07:50 PM
|
#2 |
|
The Older Generation
   
Join Date: Aug 2006
Location: Montezuma, Iowa
Posts: 25,772
|
Re: frame ????????????
-
I can't tell you off the top of my head, I have a 65 sitting outside but it's too darn cold to go out & look right now.... If you don't get a reply I will go out and look tomorrow. LockDoc
__________________
Leon Locksmith, Specializing In Antique Trucks, Automobiles, & Motorcycles (My Dually Pickup Project Thread) http://67-72chevytrucks.com/vboard/s...d.php?t=829820 - |
|
|
|
|
02-06-2007, 10:48 PM
|
#3 |
|
Senior Member
Join Date: Dec 2004
Location: Southern Pines NC
Posts: 3,853
|
Re: frame ????????????
It should........
|
|
|
|
|
02-06-2007, 11:05 PM
|
#4 |
|
Registered User
Join Date: Apr 2006
Location: MinneSNOWta
Posts: 1,381
|
Re: frame ????????????
from your description, i believe you are referring to the engine towers...
don't know if they are the same, but if you look through the classified section, you should find a couple people with the correct towers for sale fairly cheap. They seem to be fairly plentiful since most people switch from the I6 to the V-8, and then have no use for the I6 towers. Hope this helps  I borrowed this pic from the classified section, they are BBC mounts, but illustrate what i believe you are looking for.
__________________
2003 GMC Sierra 1500 WT 1995 Nissan Hardbody 2016 Hyundai Veloster Turbo DC2 (SW/AW) Clyde W. Harvey USN "Socialism is a philosophy of failure, the creed of ignorance, and the gospel of envy, its inherent virtue is the equal sharing of misery" Winston Churchill Last edited by brak; 02-06-2007 at 11:14 PM. |
|
|
|
|
02-11-2007, 11:03 PM
|
#5 |
|
The Older Generation
Join Date: Aug 2006
Location: Montezuma, Iowa
Posts: 25,772
|
Re: frame ????????????
-
Well I finally found my '67-'72 six cyl mount towers and set them beside the ones on the 65 and they are the same. Sorry it took me so long to get back. I'll PM you just to make sure you get the info. LockDoc
__________________
Leon Locksmith, Specializing In Antique Trucks, Automobiles, & Motorcycles (My Dually Pickup Project Thread) http://67-72chevytrucks.com/vboard/s...d.php?t=829820 - |
|
|
|
 |
| Bookmarks |
|
|
Hybrid Mode
