F/S driver shape swb bed - The 1947 - Present Chevrolet & GMC Truck Message Board Network

bozracer · 02-25-2007, 05:54 PM

http://smg.photobucket.com/albums/v241/bozracer/ password: 72truck
$350 firm click the link there's 15 pix pm me with any questions.

71chevytruckguy · 02-25-2007, 09:40 PM

where in western nc are you at? is that rust or paint chipped around the wheel well. what kinda shape are the supports on the bottom? any idea on how much bondo's in it? thanks, chris.

bozracer · 02-25-2007, 10:56 PM

DMARCUM123 sent you a pm

Bed floor has no holes but is wavy, PO covered the stake holes, I can see putty/bondo work on those. As for the rest of the bedsides I don't see any bondo in them. The right side has rust issues as the pix show. The wheel openings have some pitting on both sides. Some pitting on 1 support other than that they are all solid. I am located in south Asheville area.

1969k10stepside · 02-25-2007, 10:57 PM

Why oh why cant you be closer? TTT for ya

RicksTrucks · 02-25-2007, 11:07 PM

How far off of I-40 are you?

bozracer · 02-25-2007, 11:12 PM

Quote:

Originally Posted by RicksTrucks

How far off of I-40 are you?

Between 15-20 miles roughly 20 min.

RicksTrucks · 02-26-2007, 10:52 AM

I am going to Durham this weekend and may have room to bring it back this way. Is there anything you need that I could trade to bring the price down?

bozracer · 02-26-2007, 12:45 PM

Quote:

Originally Posted by RicksTrucks

I am going to Durham this weekend and may have room to bring it back this way. Is there anything you need that I could trade to bring the price down?

The only thing I'm looking for right now is a 67 swb body. Let me know if want to stop by this weekend I need to check with DMARCUM123 and 71cheytruckguy they are 1st inline.

RicksTrucks · 02-26-2007, 09:36 PM

Quote:

Originally Posted by bozracer

The only thing I'm looking for right now is a 67 swb body. Let me know if want to stop by this weekend I need to check with DMARCUM123 and 71cheytruckguy they are 1st inline.

Your call, but didn't see anyone else making any offers. Let me know the outcome.

bozracer · 02-26-2007, 10:32 PM

Quote:

Originally Posted by RicksTrucks

Your call, but didn't see anyone else making any offers. Let me know the outcome.

I'm new to this selling on here and want to do the right thing but it has been 24 hr's since answering the questions with no response. I'll be home this weekend so let me know when you want to come by. Later

RicksTrucks · 02-26-2007, 10:42 PM

I should be rolling in NC sometime Sunday, depending upon where I stay the nite Saturday. Leaving from home sometime Saturday morning. But wouldn't be able to pick it up until the trip back. How far are you from Chapel Hill, NC?

bozracer · 02-26-2007, 10:56 PM

Well when you pass thru Asheville you can time it better but I think it would take me roughly 4 hr's to get there.

RicksTrucks · 02-27-2007, 04:41 AM

Will see what time it is when we come thru to see if I can stop then, otherwise will make arrangements on the return trip. See you soon and thanks.

bozracer · 02-27-2007, 01:48 PM

Quote:

Originally Posted by RicksTrucks

Will see what time it is when we come thru to see if I can stop then, otherwise will make arrangements on the return trip. See you soon and thanks.

Will send a pm with contact #'s

RicksTrucks · 03-02-2007, 07:39 AM

Quote:

Originally Posted by bozracer

Will send a pm with contact #'s

See you Sunday or Monday, will call you.

DMARCUM123 · 03-02-2007, 08:27 AM

boz how wavy is the floor could it straight

bozracer · 03-03-2007, 01:47 AM

Quote:

Originally Posted by DMARCUM123

boz how wavy is the floor could it straight

its not bad at all mostly towards the back at the 1st support.

bozracer · 03-06-2007, 12:03 AM

Sold to RicksTrucks.
Thanks Rick hope the trip back home was a safe one.

RicksTrucks · 03-06-2007, 10:09 AM

Thanks for your help getting it up on my truck. Not quite home yet, still in Little Rock, but will be home tonite. Great trip and it was nice talking with you. Let me know if you secure that vehicle we talked about.

02-25-2007, 05:54 PM	#1
bozracer wnc tvman Join Date: Sep 2004 Location: Etowah,North Carolina Posts: 228	SOLDF/S driver shape swb bed http://smg.photobucket.com/albums/v241/bozracer/ password: 72truck $350 firm click the link there's 15 pix pm me with any questions. __________________ Oz WNC 67 Short Fleet 350 4speed 70 Short Fleet 327 4speed Last edited by bozracer; 03-06-2007 at 12:01 AM.

02-25-2007, 09:40 PM	#2
71chevytruckguy Registered User Join Date: Jul 2005 Location: Kernersville, NC Posts: 599	Re: F/S driver shape swb bed where in western nc are you at? is that rust or paint chipped around the wheel well. what kinda shape are the supports on the bottom? any idea on how much bondo's in it? thanks, chris. __________________ its a work in progess. 71 c-10 lwb, in the middle of frame off restoration. 69 c-10 swb, drag truck, 406 sbc, balanced, comp 292 cam, ported, polished, gasket matched, and bowl blended pro comp 210cc heads, 2.02/1.60 ferrea valves,1.6 roller rockers, re curved hei with msd 6al box, 2-step rev limter, accel 300+ wires, ported victor jr intake, holley 750 double pumper carb, dynomax 1 5/8 headers, 4 spd munci m-20 with super case and iron midplate, mr. gasket vertigate shifter, 5.38 pro gears with full spool, 33 spline moser axles and c-clip elimators, line-loc, 5 gal fuel cell, holley blue pump. 7.807 @ 88.37mph 1.60 60FT 80 g-20 van, tow rig, cammed 305, th350, 10 bolt 88 jeep wrangler, dd, 258, ax-15 swap, 4.5" lift, 33x12.50's, lockers, 3.55's

02-25-2007, 10:56 PM	#3
bozracer wnc tvman Join Date: Sep 2004 Location: Etowah,North Carolina Posts: 228	Re: F/S driver shape swb bed DMARCUM123 sent you a pm Bed floor has no holes but is wavy, PO covered the stake holes, I can see putty/bondo work on those. As for the rest of the bedsides I don't see any bondo in them. The right side has rust issues as the pix show. The wheel openings have some pitting on both sides. Some pitting on 1 support other than that they are all solid. I am located in south Asheville area. __________________ Oz WNC 67 Short Fleet 350 4speed 70 Short Fleet 327 4speed

02-25-2007, 10:57 PM	#4
1969k10stepside Registered User Join Date: Mar 2006 Location: USA Posts: 21,019	Re: F/S driver shape swb bed Why oh why cant you be closer? TTT for ya

02-25-2007, 11:07 PM	#5
RicksTrucks Senior Member Join Date: Jan 2005 Location: Claremore, OK 74017 Posts: 2,639	Re: F/S driver shape swb bed How far off of I-40 are you? __________________ 68 Short Stepside C-10 69 SWB C-10 70 Flatbed C-20 70 LWB C-20 BB402 70 LWB C-10 CST 70 LWB C-10 CST 71 Short Stepside Cheyenne C-10 72 LWB C-10 72 Blazer 4x4 4spd 95 Jeep Cherokee 4x4

02-26-2007, 10:52 AM	#7
RicksTrucks Senior Member Join Date: Jan 2005 Location: Claremore, OK 74017 Posts: 2,639	Re: F/S driver shape swb bed I am going to Durham this weekend and may have room to bring it back this way. Is there anything you need that I could trade to bring the price down? __________________ 68 Short Stepside C-10 69 SWB C-10 70 Flatbed C-20 70 LWB C-20 BB402 70 LWB C-10 CST 70 LWB C-10 CST 71 Short Stepside Cheyenne C-10 72 LWB C-10 72 Blazer 4x4 4spd 95 Jeep Cherokee 4x4

02-26-2007, 10:42 PM	#11
RicksTrucks Senior Member Join Date: Jan 2005 Location: Claremore, OK 74017 Posts: 2,639	Re: F/S driver shape swb bed I should be rolling in NC sometime Sunday, depending upon where I stay the nite Saturday. Leaving from home sometime Saturday morning. But wouldn't be able to pick it up until the trip back. How far are you from Chapel Hill, NC? __________________ 68 Short Stepside C-10 69 SWB C-10 70 Flatbed C-20 70 LWB C-20 BB402 70 LWB C-10 CST 70 LWB C-10 CST 71 Short Stepside Cheyenne C-10 72 LWB C-10 72 Blazer 4x4 4spd 95 Jeep Cherokee 4x4

02-26-2007, 10:56 PM	#12
bozracer wnc tvman Join Date: Sep 2004 Location: Etowah,North Carolina Posts: 228	Re: F/S driver shape swb bed Well when you pass thru Asheville you can time it better but I think it would take me roughly 4 hr's to get there. __________________ Oz WNC 67 Short Fleet 350 4speed 70 Short Fleet 327 4speed

02-27-2007, 04:41 AM	#13
RicksTrucks Senior Member Join Date: Jan 2005 Location: Claremore, OK 74017 Posts: 2,639	Re: F/S driver shape swb bed Will see what time it is when we come thru to see if I can stop then, otherwise will make arrangements on the return trip. See you soon and thanks. __________________ 68 Short Stepside C-10 69 SWB C-10 70 Flatbed C-20 70 LWB C-20 BB402 70 LWB C-10 CST 70 LWB C-10 CST 71 Short Stepside Cheyenne C-10 72 LWB C-10 72 Blazer 4x4 4spd 95 Jeep Cherokee 4x4

03-02-2007, 08:27 AM	#16
DMARCUM123 Registered User Join Date: Sep 2006 Location: WAYNE, WV. Posts: 675	Re: F/S driver shape swb bed boz how wavy is the floor could it straight

03-06-2007, 12:03 AM	#18
bozracer wnc tvman Join Date: Sep 2004 Location: Etowah,North Carolina Posts: 228	Re: F/S driver shape swb bed Sold to RicksTrucks. Thanks Rick hope the trip back home was a safe one. __________________ Oz WNC 67 Short Fleet 350 4speed 70 Short Fleet 327 4speed

03-06-2007, 10:09 AM	#19
RicksTrucks Senior Member Join Date: Jan 2005 Location: Claremore, OK 74017 Posts: 2,639	Re: F/S driver shape swb bed Thanks for your help getting it up on my truck. Not quite home yet, still in Little Rock, but will be home tonite. Great trip and it was nice talking with you. Let me know if you secure that vehicle we talked about. __________________ 68 Short Stepside C-10 69 SWB C-10 70 Flatbed C-20 70 LWB C-20 BB402 70 LWB C-10 CST 70 LWB C-10 CST 71 Short Stepside Cheyenne C-10 72 LWB C-10 72 Blazer 4x4 4spd 95 Jeep Cherokee 4x4



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.