just a quick question. - The 1947 - Present Chevrolet & GMC Truck Message Board Network

cstm68 · 02-27-2007, 02:00 AM

so my new parts truck has a front sway bar. its not in bad shape but coud use some cleaning up. my question is can i use this on my project or should i buy a new one?

stllookn · 02-27-2007, 02:12 AM

Use the existing swaybar and replace the rubber bushings...there is not much you can do to them. Some like to use the larger 1 1/8" bars from later model or larger trucks but the stock bar is fine.

cstm68 · 02-27-2007, 02:21 AM

Quote:

Originally Posted by stllookn

Use the existing swaybar and replace the rubber bushings...there is not much you can do to them. Some like to use the larger 1 1/8" bars from later model or larger trucks but the stock bar is fine.

ware can i get the new rubber bushings ?

GREASEMONKEY72 · 02-27-2007, 02:31 AM

should be able to from one of the venders here on the board or even at your local parts store

cstm68 · 02-27-2007, 02:48 AM

thanx

Tx Firefighter · 02-27-2007, 08:07 AM

Moog sells real nice urethane bushings that you can buy anywhere Moog products are sold. Around here, that's O Reilly Auto Parts. There is a swaybar article in the FAQ section that gives pictures and details.

02-27-2007, 02:00 AM	#1
cstm68 Registered User Join Date: Jan 2007 Location: shoreline, wa Posts: 1,565	just a quick question. so my new parts truck has a front sway bar. its not in bad shape but coud use some cleaning up. my question is can i use this on my project or should i buy a new one?

02-27-2007, 02:12 AM	#2
stllookn Saving 1 truck at a time! Join Date: Aug 2001 Location: Kent, WA Posts: 6,465	Re: just a quick question. Use the existing swaybar and replace the rubber bushings...there is not much you can do to them. Some like to use the larger 1 1/8" bars from later model or larger trucks but the stock bar is fine. __________________ '68 C20 Longhorn 50th Anniversary 400/TH400 '68 C20 Longhorn 50th Anniversary 468/TH400w/buckets '72 C20 Halfhorn (Longhorn w/o cab and front clip) '69 Flxible Cruiser (look up ugly in the dictionary)

02-27-2007, 02:31 AM	#4
GREASEMONKEY72 Registered User Join Date: Aug 2006 Location: Bakersfield,CA Posts: 7,893	Re: just a quick question. should be able to from one of the venders here on the board or even at your local parts store __________________ -steven Alte Seele S.S. "Allison" '72 C/10 LWB 350SB/TH350 - DD PITBULL IS NOT A CRIME

02-27-2007, 02:48 AM	#5
cstm68 Registered User Join Date: Jan 2007 Location: shoreline, wa Posts: 1,565	Re: just a quick question. thanx

02-27-2007, 08:07 AM	#6
Tx Firefighter Watch out for your cornhole ! Join Date: Jun 2003 Location: Azle, Texas Posts: 14,162	Re: just a quick question. Moog sells real nice urethane bushings that you can buy anywhere Moog products are sold. Around here, that's O Reilly Auto Parts. There is a swaybar article in the FAQ section that gives pictures and details. __________________ I'm on the Instagram- @Gearhead_Kevin



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.