|
|
|
02-28-2007, 12:25 PM
|
#1 |
|
Still Green but learning
Join Date: Nov 2004
Location: Central NC
Posts: 1,895
|
Carb Rebuild
I have a small fuel leak in the carb that needs to be addressed at some point.
I found this after searching, http://67-72chevytrucks.com/vboard/s...uretor+rebuild It is helpfull with links, I guess my question is seeing as I have never re-built a carb before would it be worth it for me to find one rebuilt and purchase, or maybe a new setup? Any recomendations on low to med priced performance setups?
__________________
-- Cory 71 Cheyenne 10 - SWB, 350, "3 on the tree" AC cab 07 Suburban LTZ 4x4 2010 Acura TL 98 Mastercraft "FrankenStar" 225 27253 UPS/USPS IIOY....nope never was |
|
|
|
02-28-2007, 01:44 PM
|
#2 |
|
Registered User
Join Date: Dec 2001
Location: harvard, il. USA
Posts: 389
|
Re: Carb Rebuild
Where's the leak? Tween the 2 halfs? A hole punched in the side(grin)? Im assuming your talkin bout a 4 bbl q-jet.
They aint hard to rebuild, and Im no mechanic. There should be instruction in the kit. Between them, the link, and the sites in the link, you should be good to go. Keep things clean, take tons of pics that you can reference when you forget how its goes back together (big grin). HTH....good luck.....don t. ..... |
|
|
|
|
03-01-2007, 05:27 PM
|
#3 |
|
Still Green but learning
Join Date: Nov 2004
Location: Central NC
Posts: 1,895
|
Re: Carb Rebuild
I found one for $147.99 on line at Autozone.... no work space (just moved to an apt) no time (I have 2 little ones and am finishing up a move)....
this may be another good option.... I was looking forward to getting greasy, decisions decisions.
__________________
-- Cory 71 Cheyenne 10 - SWB, 350, "3 on the tree" AC cab 07 Suburban LTZ 4x4 2010 Acura TL 98 Mastercraft "FrankenStar" 225 27253 UPS/USPS IIOY....nope never was |
|
|
|
|
03-01-2007, 07:50 PM
|
#4 |
|
Registered User
Join Date: Jul 2005
Location: Kernersville, NC
Posts: 599
|
Re: Carb Rebuild
where in nc are you at? i might be able to help you with your rebuild if you ain't too far?
__________________
its a work in progess. 71 c-10 lwb, in the middle of frame off restoration. 69 c-10 swb, drag truck, 406 sbc, balanced, comp 292 cam, ported, polished, gasket matched, and bowl blended pro comp 210cc heads, 2.02/1.60 ferrea valves,1.6 roller rockers, re curved hei with msd 6al box, 2-step rev limter, accel 300+ wires, ported victor jr intake, holley 750 double pumper carb, dynomax 1 5/8 headers, 4 spd munci m-20 with super case and iron midplate, mr. gasket vertigate shifter, 5.38 pro gears with full spool, 33 spline moser axles and c-clip elimators, line-loc, 5 gal fuel cell, holley blue pump.   7.807 @ 88.37mph 1.60 60FT 80 g-20 van, tow rig, cammed 305, th350, 10 bolt 88 jeep wrangler, dd, 258, ax-15 swap, 4.5" lift, 33x12.50's, lockers, 3.55's |
|
|
|
|
03-02-2007, 09:18 AM
|
#5 |
|
Still Green but learning
Join Date: Nov 2004
Location: Central NC
Posts: 1,895
|
Re: Carb Rebuild
Not far at all. I am in Mebane NC, My wifes family lives in winston. I appreciate the invite, the carb isnt a huge issue now so after things settle on the move I will pm you and if you have time I would really appreciate the help!!
thanks...... This is such a great community.
__________________
-- Cory 71 Cheyenne 10 - SWB, 350, "3 on the tree" AC cab 07 Suburban LTZ 4x4 2010 Acura TL 98 Mastercraft "FrankenStar" 225 27253 UPS/USPS IIOY....nope never was |
|
|
|
|
03-03-2007, 11:01 AM
|
#6 |
|
More hobbies than money!
Join Date: Jan 2002
Location: Raleigh, nc, usa
Posts: 655
|
Re: Carb Rebuild
Dude, come on over. We'll have that thing rebuilt in an hour!
__________________
'70 cst10/swb 350, 3 on the tree, factory buckets. '70 GMC lwb 350/350 ps,pb '72 c-10 lwb 350/350 a/c, ps, pb '72 Blazer project |
|
|
|
 |
| Bookmarks |
|
|
Hybrid Mode
