3 on the tree linkaging pictures - The 1947 - Present Chevrolet & GMC Truck Message Board Network

84_4x4 · 03-06-2007, 07:12 PM

anyone have any pictures of their linkages i just got a set and now i need to hook them up and i cant seam to figure out which ones go where and over or under the clutch linkaging any pictures or advice would help a lot would like to have it working soon so i can get a handle on three on the tree before i drive to far

84_4x4 · 03-06-2007, 08:32 PM

pictures from the topside would really help im really confused on about how these linkages run or where to buy parts like the bushings

crazyred · 03-07-2007, 03:04 AM

ttt for you because I need to know too

That would be one thing I never did get a picture of before it came apart

northerngmc · 03-07-2007, 11:25 AM

There is a post in the FAQ sticky about adjusting the 3 speed manual. Maybe it will help.

http://67-72chevytrucks.com/vboard/s...d.php?t=215307

Or PM the author?

84_4x4 · 03-07-2007, 09:20 PM

yeah i already looked there no pictures of it i seam to be runnign into clearance issues with clutch linkaging

**CPNE** · 03-07-2007, 09:53 PM

Not sure if this helps, best I could do. This is a STOCK 69-72 small block/3speed column linkage set up. There ARE differences between 67/68 trannys and I6 setups (all years). It may also make a difference if you put your small block in the forward (factory correct) position, or in the rearward I6 position

84_4x4 · 03-07-2007, 11:36 PM

thanks that makes all the difference i was putting the rods in upside down no wonder they didn't want to line up

thanks a lot now i think once i dint the pieces to connect them to the column and tranny i can get it to work

03-06-2007, 07:12 PM	#1
84_4x4 Registered User Join Date: Oct 2006 Location: Louisville Ky Posts: 179	3 on the tree linkaging pictures anyone have any pictures of their linkages i just got a set and now i need to hook them up and i cant seam to figure out which ones go where and over or under the clutch linkaging any pictures or advice would help a lot would like to have it working soon so i can get a handle on three on the tree before i drive to far __________________ 1971 c10 350ci long bed fleet side

03-06-2007, 08:32 PM	#2
84_4x4 Registered User Join Date: Oct 2006 Location: Louisville Ky Posts: 179	Re: 3 on the tree linkaging pictures pictures from the topside would really help im really confused on about how these linkages run or where to buy parts like the bushings __________________ 1971 c10 350ci long bed fleet side

03-07-2007, 03:04 AM	#3
crazyred yeeha Join Date: Sep 2005 Location: Sherwood Park & Fort McMurray, Alberta Posts: 72	Re: 3 on the tree linkaging pictures ttt for you because I need to know too That would be one thing I never did get a picture of before it came apart __________________ 1969 GMC 910 97% rust free 2002 olds Alero 1986 New Yorker 4dr ... the new DD...My POS car... dude its got a turbo!!! Don't drink and drive, you might spill something!!! Daryl Kuchmak

03-07-2007, 11:25 AM	#4
northerngmc Registered User Join Date: Jan 2004 Location: Whitehorse YK Canada Posts: 2,651	Re: 3 on the tree linkaging pictures There is a post in the FAQ sticky about adjusting the 3 speed manual. Maybe it will help. http://67-72chevytrucks.com/vboard/s...d.php?t=215307 Or PM the author? __________________ Blaine 59 GMC 9314 a.k.a. Whoopee 68 C20 50th Anniversary a.k.a. The Rat http://www.flickr.com/photos/northerngmc/ http://www.members.tripod.com/P-wee/index_032.htm 1.61803 is one H of a lot better than 3.14159, no really it is!

03-07-2007, 09:20 PM	#5
84_4x4 Registered User Join Date: Oct 2006 Location: Louisville Ky Posts: 179	Re: 3 on the tree linkaging pictures yeah i already looked there no pictures of it i seam to be runnign into clearance issues with clutch linkaging __________________ 1971 c10 350ci long bed fleet side

03-07-2007, 09:53 PM	#6
CPNE Resident Curmudgeon Join Date: Dec 1999 Location: NH Posts: 6,664	Re: 3 on the tree linkaging pictures Not sure if this helps, best I could do. This is a STOCK 69-72 small block/3speed column linkage set up. There ARE differences between 67/68 trannys and I6 setups (all years). It may also make a difference if you put your small block in the forward (factory correct) position, or in the rearward I6 position Attached Images __________________ Currently on or near the homestead: 67 Chevy SWB 2WD stepside 350/3 on tree (Pat's) 67 GMC SWB 2WD Fleet 402/auto (Brian's under construction) 67 Chevy 3/4 ton 2WD 402/auto (Business Hauler) 67 Chevy 1 ton dually 2WD 396/4 speed (Former business hauler, Needs TLC) 68 Chevy 1/2 ton Suburban 2WD 250 six/3 on tree (Brian's Needs TLC) 70 Chevy 3/4 ton 4WD 350/4 speed (Pat's - Disguised as a 68 GMC) 71 Chevy SWB stepside (Crushed by tree - parts donor) 72 Chevy 3/4 ton 4WD (Parts donor) 72 Chevy 3/4 ton 4WD Suburban (Parts Donor) 72 GMC 3/4 ton 4WD 292 six/4 speed (Mine - Disguised as a 67 GMC) 81 GMC 4WD Dually Dump Body 350/4 speed (Business Hauler) 82 Camaro Z/28 355/Super T-10 (Pat's toy) 93 Caprice 9C1 (Brian's Cop Car) 02 Toyota Camry (Reliable but a souless steel and plastic hulk) 2011 2SS RS Camaro M6 Factory Hurst Shifter Maybe I need to sell some of this crap Yet another Bozo with a sawz-all

03-07-2007, 11:36 PM	#7
84_4x4 Registered User Join Date: Oct 2006 Location: Louisville Ky Posts: 179	Re: 3 on the tree linkaging pictures thanks that makes all the difference i was putting the rods in upside down no wonder they didn't want to line up thanks a lot now i think once i dint the pieces to connect them to the column and tranny i can get it to work __________________ 1971 c10 350ci long bed fleet side



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.