toolbox door - The 1947 - Present Chevrolet & GMC Truck Message Board Network

mtdave2 · 03-11-2007, 04:03 PM

Since i finally found the fiberglass door i don’t need this one anymore.

i bought this a while ago from a board member. its a solid door, just has a dent in the front. Wouldn’t be too bad to repair. Also if you want it, the fiberglass box goes with it. Comes with the metal wire stop for holding the door horizontal.

let me know if you want more photos.
$175 obo
plus shipping

Huskerboy2 · 03-11-2007, 06:01 PM

PM Sent

abbysam1 · 03-11-2007, 09:15 PM

I would like to be next in line.

Randy

Huskerboy2 · 03-16-2007, 10:18 AM

I had to pass. The truck I was going to use this door on got sold to somebody else.

Randy, you're up.

Longhorn Man · 03-16-2007, 03:02 PM

Wait a min... MTDave was looking for one....wait... huh?
Oh... nevermind.

Texasdeere · 03-16-2007, 03:31 PM

Do you have any hinges for it?

mtdave2 · 03-16-2007, 03:54 PM

sorry no hinges.

mtdave2 · 03-22-2007, 08:59 PM

tt

mtdave2 · 03-23-2007, 06:05 PM

if i sanded the door down to remove that hotrod paint what that change anyones mind? id love to sell this stuff.

mtdave2 · 03-27-2007, 10:22 PM

i did find one extra hinge! so ill throw that in as well

mtdave2 · 12-16-2007, 04:27 AM

still have this im my shed, if anyone is interested. $125 + shipping

**PICKMUP** · 12-16-2007, 09:40 AM

Yes, I am interested and will take it IF...there are no rust blisters front or back and no other damage, dents, bends or bondo.
The back looks good in the pics, but please check both and tell me for sure.
Thanks, Frank

Blue_71 · 12-17-2007, 07:25 PM

i found this kinda late, but if frank doesnt take it put me next in line. how good is the latch?

mtdave2 · 12-18-2007, 06:37 AM

ill take some more photos and post them so you can look for yourself.

**PICKMUP** · 12-18-2007, 06:54 AM

Thanks, I appreciate it..

mtdave2 · 12-19-2007, 06:18 AM

mtdave2 · 12-19-2007, 06:21 AM

mtdave2 · 12-19-2007, 06:25 AM

mtdave2 · 12-19-2007, 06:29 AM

**PICKMUP** · 12-19-2007, 07:02 AM

I will have to pass. That is not what I am looking for right now. Thanks for the good pics...Frank

RVFR · 12-19-2007, 08:11 PM

Curious, where did you find a glass door? any more to be had? That said, I will be more than interested after Xmas, as I better be spending funds on some one else, other wise I'd be on this one. Okay guys, where can one find hinges?

mtdave2 · 12-20-2007, 05:53 PM

Quote:

Originally Posted by RVFR

Curious, where did you find a glass door? any more to be had? That said, I will be more than interested after Xmas, as I better be spending funds on some one else, other wise I'd be on this one. Okay guys, where can one find hinges?

the glass doors are harder to find than shoulder belts! i looked for years! ill buy ANY i run into, IF i ever see one again.

Blue_71 · 12-19-2007, 08:19 PM

sending you a pm dave

ksbeatty · 12-21-2007, 02:13 PM

I sent PM

re1 · 01-04-2008, 10:39 AM

Is it still forsale?

03-11-2007, 04:03 PM	#1
mtdave2 newly minted old timer Join Date: Dec 1999 Location: Hudson WI Posts: 3,521	toolbox door Since i finally found the fiberglass door i don’t need this one anymore. i bought this a while ago from a board member. its a solid door, just has a dent in the front. Wouldn’t be too bad to repair. Also if you want it, the fiberglass box goes with it. Comes with the metal wire stop for holding the door horizontal. let me know if you want more photos. $175 obo plus shipping __________________ ____________________________________________ 72 c20 longhorn 65k org miles and counting! 69 k10 Suburban Last edited by mtdave2; 03-11-2007 at 04:04 PM.

03-11-2007, 06:01 PM	#2
Huskerboy2 Senior Member Join Date: Feb 2001 Location: Austin, Texas, USA Posts: 1,628	Re: toolbox door PM Sent __________________ '72 Chevy Blazer

03-11-2007, 09:15 PM	#3
abbysam1 Registered User Join Date: Dec 2006 Location: O'Fallon, IL Posts: 18	Re: toolbox door I would like to be next in line. Randy __________________ 1972 Cheyenne C-20 Currrently being painted 1972 Custom C-10 My daily driver

03-16-2007, 10:18 AM	#4
Huskerboy2 Senior Member Join Date: Feb 2001 Location: Austin, Texas, USA Posts: 1,628	Re: toolbox door I had to pass. The truck I was going to use this door on got sold to somebody else. Randy, you're up. __________________ '72 Chevy Blazer

03-16-2007, 03:02 PM	#5
Longhorn Man its all about the +6 inches Join Date: Jan 2001 Location: Hilliard Ohio Posts: 2,690	Re: toolbox door Wait a min... MTDave was looking for one....wait... huh? Oh... nevermind.

03-16-2007, 03:31 PM	#6
Texasdeere Registered User Join Date: Sep 2006 Location: League City, Texas Posts: 732	Re: toolbox door Do you have any hinges for it?

03-16-2007, 03:54 PM	#7
mtdave2 newly minted old timer Join Date: Dec 1999 Location: Hudson WI Posts: 3,521	Re: toolbox door sorry no hinges. __________________ ____________________________________________ 72 c20 longhorn 65k org miles and counting! 69 k10 Suburban

03-22-2007, 08:59 PM	#8
mtdave2 newly minted old timer Join Date: Dec 1999 Location: Hudson WI Posts: 3,521	Re: toolbox door tt __________________ ____________________________________________ 72 c20 longhorn 65k org miles and counting! 69 k10 Suburban

03-23-2007, 06:05 PM	#9
mtdave2 newly minted old timer Join Date: Dec 1999 Location: Hudson WI Posts: 3,521	Re: toolbox door if i sanded the door down to remove that hotrod paint what that change anyones mind? id love to sell this stuff. __________________ ____________________________________________ 72 c20 longhorn 65k org miles and counting! 69 k10 Suburban

03-27-2007, 10:22 PM	#10
mtdave2 newly minted old timer Join Date: Dec 1999 Location: Hudson WI Posts: 3,521	Re: toolbox door i did find one extra hinge! so ill throw that in as well __________________ ____________________________________________ 72 c20 longhorn 65k org miles and counting! 69 k10 Suburban

12-16-2007, 04:27 AM	#11
mtdave2 newly minted old timer Join Date: Dec 1999 Location: Hudson WI Posts: 3,521	Re: toolbox door still have this im my shed, if anyone is interested. $125 + shipping __________________ ____________________________________________ 72 c20 longhorn 65k org miles and counting! 69 k10 Suburban

12-16-2007, 09:40 AM	#12
PICKMUP "Trucks with Class" Join Date: Jul 2000 Location: OLYMPIA, WA, USA Posts: 8,158	Re: toolbox door Yes, I am interested and will take it IF...there are no rust blisters front or back and no other damage, dents, bends or bondo. The back looks good in the pics, but please check both and tell me for sure. Thanks, Frank Last edited by PICKMUP; 12-16-2007 at 03:57 PM.

12-18-2007, 06:37 AM	#14
mtdave2 newly minted old timer Join Date: Dec 1999 Location: Hudson WI Posts: 3,521	Re: toolbox door ill take some more photos and post them so you can look for yourself. __________________ ____________________________________________ 72 c20 longhorn 65k org miles and counting! 69 k10 Suburban

12-18-2007, 06:54 AM	#15
PICKMUP "Trucks with Class" Join Date: Jul 2000 Location: OLYMPIA, WA, USA Posts: 8,158	Re: toolbox door Thanks, I appreciate it..

12-19-2007, 06:18 AM	#16
mtdave2 newly minted old timer Join Date: Dec 1999 Location: Hudson WI Posts: 3,521	Re: toolbox door __________________ ____________________________________________ 72 c20 longhorn 65k org miles and counting! 69 k10 Suburban



Register or Log In To remove these advertisements.

12-19-2007, 06:21 AM	#17
mtdave2 newly minted old timer Join Date: Dec 1999 Location: Hudson WI Posts: 3,521	Re: toolbox door __________________ ____________________________________________ 72 c20 longhorn 65k org miles and counting! 69 k10 Suburban Last edited by mtdave2; 12-19-2007 at 06:24 AM.

12-19-2007, 06:25 AM	#18
mtdave2 newly minted old timer Join Date: Dec 1999 Location: Hudson WI Posts: 3,521	Re: toolbox door __________________ ____________________________________________ 72 c20 longhorn 65k org miles and counting! 69 k10 Suburban

12-19-2007, 06:29 AM	#19
mtdave2 newly minted old timer Join Date: Dec 1999 Location: Hudson WI Posts: 3,521	Re: toolbox door __________________ ____________________________________________ 72 c20 longhorn 65k org miles and counting! 69 k10 Suburban

12-19-2007, 07:02 AM	#20
PICKMUP "Trucks with Class" Join Date: Jul 2000 Location: OLYMPIA, WA, USA Posts: 8,158	Re: toolbox door I will have to pass. That is not what I am looking for right now. Thanks for the good pics...Frank

12-19-2007, 08:11 PM	#21
RVFR New Member Join Date: Jan 2007 Location: Olympia, WA. Posts: 21	Re: toolbox door Curious, where did you find a glass door? any more to be had? That said, I will be more than interested after Xmas, as I better be spending funds on some one else, other wise I'd be on this one. Okay guys, where can one find hinges? __________________ Getting you where you belong.... before it's too late. jk-industries.com/whirl.htm www.loopsies.com Most fun your dog can have.

12-19-2007, 08:19 PM	#23
Blue_71 Bloo Join Date: Feb 2001 Location: Barren County Kentucky Posts: 6,283	Re: toolbox door sending you a pm dave

12-21-2007, 02:13 PM	#24
ksbeatty Registered User Join Date: Mar 2006 Location: Kansas Posts: 300	Re: toolbox door I sent PM __________________ 1969 GMC 3/4 Ton 4x4 2" Lift, A/C, PS, PB 383 Stroker, 700R4, 205, 4.10 GM Medium Bronze (Copper Poly) no new nick name yet. She is to pretty to be the Beater. http://67-72chevytrucks.com/vboard/s...d.php?t=241855

01-04-2008, 10:39 AM	#25
re1 Registered User Join Date: Oct 2005 Location: Metro Vancouver Posts: 444	Re: toolbox door Is it still forsale? __________________ 1972 Chevy C10 Custom Deluxe Highlander 1972 Chevy C10 Custom Deluxe Medium Green

Register or Log In To remove these advertisements.