WTB: Got a rotted LWB Bed you want to make a little on before it gets crushed? - The 1947 - Present Chevrolet & GMC Truck Message Board Network

arkracing · 03-12-2007, 02:47 PM

I need a couple of patch panels for my bed

#1. Drivers Side bedside - 16" from the front of the bed side - I would like the inner and outer bedside as I want to drill out the spot welds on the front and bed rail to minimize the weld area on the actual sheet metal. Want to get rid of the crude Aux. Fuel door.

#2. Part of a section of a cross sill - as you can see from the picture it is the driver's side cross sill - second mounting cross sill from the front of the bed. I need a section from the outside to the mount hole, or a section of one that is the same length.

#3. I also need a section of floor about 16" x 16"

Can you help me out???!!!

Thanks,
Andy

jkaylor68gmc · 03-12-2007, 02:48 PM

I may have some, going to go look at a '67 LXB fleetside for parts this afternoon.

BarryB · 03-12-2007, 09:30 PM

I have a couple pieces of cross sill. but it was for a wood floor. if you can make it work I'll give it to ya. you pay shipping.

arkracing · 03-12-2007, 09:36 PM

Pretty sure I'll need the ones for a steel floor as the are different heights. Thanks for the offer

IvelDesigns · 03-12-2007, 10:26 PM

i have a lwb ready to go to the crusher. I can take a look and see if the front 16 inches is good or not. Pretty sure it is, but we moved the bed around with the tractor this weekend, so it may have got bent in the mud. i'll take a look though.

*67/72junkie* · 03-12-2007, 11:15 PM

I have everything you need $35 plus shipping.I just recently cut up 2 to do some patching myself.

arkracing · 03-13-2007, 08:12 AM

GMC - awesome - any way to get some pictures? if not that is ok.

I'm sending a PM your way.

Evel - I'll give you second shot (only cause I would rather get everything from 1 person to save on shipping costs)

Thanks Guys,
Andy

arkracing · 03-23-2007, 07:49 AM

GMC - it's been a while and I haven't really heard back other than "I'll get to it in a couple of days"

If someone else has the stuff that I need - please let me know. I need to get going on the truck. It's taking up room that I don't have right now.

Thanks,
Andy

*67/72junkie* · 03-23-2007, 08:17 AM

I have been painting a house all week getting ready for a trip to ca.I have the parts cut out but haven,t got ready to ship.If I get home in time today I will take care of it ,If not first thing tomorrow morning.

03-12-2007, 09:36 PM	#4
arkracing Weekend Warrior Join Date: Oct 2004 Location: CT Posts: 1,787	Re: WTB: Got a rotted LWB Bed you want to make a little on before it gets crushed? Pretty sure I'll need the ones for a steel floor as the are different heights. Thanks for the offer __________________ -'07 GMC Sierra K2500HD -'66 C10 Suburban -'68/'71 K20 Service Bed Project -'69 Chevy C30 Mason Dump -'33Ford P/U 396ChevyPowered

03-12-2007, 10:26 PM	#5
IvelDesigns Commander Taco Bello Join Date: Sep 2006 Location: Des Moines, Iowa Posts: 2,232	Re: WTB: Got a rotted LWB Bed you want to make a little on before it gets crushed? i have a lwb ready to go to the crusher. I can take a look and see if the front 16 inches is good or not. Pretty sure it is, but we moved the bed around with the tractor this weekend, so it may have got bent in the mud. i'll take a look though. __________________ Bagged '50 3600 - Bumper punchin' road kill since 2009... Bagged '69 C10 Longbed - Bumper punchin' road kill since 2007...

03-12-2007, 11:15 PM	#6
67/72junkie Account Suspended Join Date: Oct 2002 Location: NC Posts: 1,129	Re: WTB: Got a rotted LWB Bed you want to make a little on before it gets crushed? I have everything you need $35 plus shipping.I just recently cut up 2 to do some patching myself.

03-13-2007, 08:12 AM	#7
arkracing Weekend Warrior Join Date: Oct 2004 Location: CT Posts: 1,787	Re: WTB: Got a rotted LWB Bed you want to make a little on before it gets crushed? GMC - awesome - any way to get some pictures? if not that is ok. I'm sending a PM your way. Evel - I'll give you second shot (only cause I would rather get everything from 1 person to save on shipping costs) Thanks Guys, Andy __________________ -'07 GMC Sierra K2500HD -'66 C10 Suburban -'68/'71 K20 Service Bed Project -'69 Chevy C30 Mason Dump -'33Ford P/U 396ChevyPowered Last edited by arkracing; 03-13-2007 at 08:18 AM.

03-23-2007, 07:49 AM	#8
arkracing Weekend Warrior Join Date: Oct 2004 Location: CT Posts: 1,787	Re: WTB: Got a rotted LWB Bed you want to make a little on before it gets crushed? GMC - it's been a while and I haven't really heard back other than "I'll get to it in a couple of days" If someone else has the stuff that I need - please let me know. I need to get going on the truck. It's taking up room that I don't have right now. Thanks, Andy __________________ -'07 GMC Sierra K2500HD -'66 C10 Suburban -'68/'71 K20 Service Bed Project -'69 Chevy C30 Mason Dump -'33Ford P/U 396ChevyPowered

03-12-2007, 02:47 PM	#1
arkracing Weekend Warrior Join Date: Oct 2004 Location: CT Posts: 1,787	WTB: Got a rotted LWB Bed you want to make a little on before it gets crushed? I need a couple of patch panels for my bed #1. Drivers Side bedside - 16" from the front of the bed side - I would like the inner and outer bedside as I want to drill out the spot welds on the front and bed rail to minimize the weld area on the actual sheet metal. Want to get rid of the crude Aux. Fuel door. #2. Part of a section of a cross sill - as you can see from the picture it is the driver's side cross sill - second mounting cross sill from the front of the bed. I need a section from the outside to the mount hole, or a section of one that is the same length. #3. I also need a section of floor about 16" x 16" Can you help me out???!!! Thanks, Andy __________________ -'07 GMC Sierra K2500HD -'66 C10 Suburban -'68/'71 K20 Service Bed Project -'69 Chevy C30 Mason Dump -'33Ford P/U 396ChevyPowered Last edited by arkracing; 03-12-2007 at 02:52 PM.

03-12-2007, 02:48 PM	#2
jkaylor68gmc Senior Member Join Date: Dec 2005 Location: TN Posts: 2,448	Re: WTB: Got a rotted LWB Bed you want to make a little on before it gets crushed? I may have some, going to go look at a '67 LXB fleetside for parts this afternoon.

03-12-2007, 09:30 PM	#3
BarryB Senior Member Join Date: Jul 2006 Location: Blountville, Tn. Posts: 3,904	Re: WTB: Got a rotted LWB Bed you want to make a little on before it gets crushed? I have a couple pieces of cross sill. but it was for a wood floor. if you can make it work I'll give it to ya. you pay shipping.

03-23-2007, 08:17 AM	#9
67/72junkie Account Suspended Join Date: Oct 2002 Location: NC Posts: 1,129	Re: WTB: Got a rotted LWB Bed you want to make a little on before it gets crushed? I have been painting a house all week getting ready for a trip to ca.I have the parts cut out but haven,t got ready to ship.If I get home in time today I will take care of it ,If not first thing tomorrow morning.



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.