Show me pics of brackets please. - The 1947 - Present Chevrolet & GMC Truck Message Board Network

jorgensensc · 03-24-2007, 10:58 AM

Long story short.All on a 350, with no bolt holes in the heads. I have a swp with a couple of pulleys that don't line up correctly.Instead of buying new swp pulleys (junkyard aren't pairing them together and it is a mess of pulleys) I bought a long water pump because I have lwp pulleys at the house. I need to get the brackets for power steering and alternator on driverside for the Lwp, but without using head bolts for the alt brackets. Do they make such an animal? I was trying to avoid going aftermarket. Does anyone have pics of the brackets so I can go Junkyarding this week? Thanks in advance!
Shawn

454_72_4X4 · 03-24-2007, 05:20 PM

I don't know of any LWP brackets that have the alt on the left or that don't use the holes in the cylinder head. (Just cause I haven't seen it, doesn't mean they didn't make it though.)

I do have a bunch of SWP pullies though, if that'd help ya out.
If ya do a search on my username you should find them in the classified here.

FLEET72 · 03-24-2007, 06:50 PM

I once had a '73 El Camino where the power steering pump bracket bolted onto a casting on the pump. I wanted to use camel hump heads, no holes, so I lined up all the stock brackets and drilled and tapped the head. A little silicon seal in the hole when I bolted it all up and never had any problems.

03-24-2007, 10:58 AM	#1
jorgensensc Registered User Join Date: Jul 2003 Location: Cypress, Tx Posts: 4,005	Show me pics of brackets please. Long story short.All on a 350, with no bolt holes in the heads. I have a swp with a couple of pulleys that don't line up correctly.Instead of buying new swp pulleys (junkyard aren't pairing them together and it is a mess of pulleys) I bought a long water pump because I have lwp pulleys at the house. I need to get the brackets for power steering and alternator on driverside for the Lwp, but without using head bolts for the alt brackets. Do they make such an animal? I was trying to avoid going aftermarket. Does anyone have pics of the brackets so I can go Junkyarding this week? Thanks in advance! Shawn __________________ 1972 C20 Suburban- Big Blue Betty '56 Chevy Bel Air Sedan- Frame up Restoration -What would you attempt to achieve if you knew you could not fail?- -I Refuse To Tiptoe Through Life, Only To Arrive Safely At Death's Door- R.I.P. EAST SIDE LOW LIFE

03-24-2007, 05:20 PM	#2
454_72_4X4 Registered User Join Date: Apr 2004 Location: N.E. MO Posts: 1,749	Re: Show me pics of brackets please. I don't know of any LWP brackets that have the alt on the left or that don't use the holes in the cylinder head. (Just cause I haven't seen it, doesn't mean they didn't make it though.) I do have a bunch of SWP pullies though, if that'd help ya out. If ya do a search on my username you should find them in the classified here. __________________ 72 C20 4X4 454 4 speed 89 Trans Am (was) 305 TPI 700r4 93 C1500 2wd Extended cab 350 700r4 98 Sonoma (TPI outa the Trans Am) 03 Yamaha 660 Raptor 03/04 660 Raptor 07 700 Raptor 85 Honda Odyssey

03-24-2007, 06:50 PM	#3
FLEET72 Registered User Join Date: Jan 2007 Location: Sonoma, CA Posts: 521	Re: Show me pics of brackets please. I once had a '73 El Camino where the power steering pump bracket bolted onto a casting on the pump. I wanted to use camel hump heads, no holes, so I lined up all the stock brackets and drilled and tapped the head. A little silicon seal in the hole when I bolted it all up and never had any problems. __________________ Oscar '72 Shortbed Fleetside '95 Jimmy 4X4 '69 GMC Custom Camper



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.