What did you get done this weekend - The 1947 - Present Chevrolet & GMC Truck Message Board Network

70GMCer · 03-25-2007, 04:44 PM

I removed the front suspension from my 84 burb to get ready to install on my 70 GMC.....

ronh72c10 · 03-25-2007, 07:04 PM

I replaced the bottom portion of the battery tray and powder coated it, repaired the pass inner fender and core support for the c10.

And finished my portable infrared (actually radient heat) propane fueled powder coat curing stand.

Ron

mike nutt · 03-25-2007, 07:27 PM

got the truck color sanded and buffed this weekend , also got the truck out of the shop and cleand it up and took it for a ride . here's a couple of pics.

Wootdog · 03-25-2007, 08:00 PM

I put inner and outer tie rods on my 68 short wide. Then I greased the front end. Used the 67 stepside to go get the parts. Wootdog.

*72CSTC5* · 03-25-2007, 09:00 PM

Absoutely nothing. Sick with a cold since Friday night.

BurnoutNova · 03-25-2007, 09:03 PM

i cleaned out the garage... spent about 4 hours on it today and i still aint done

bad_turbo · 03-25-2007, 09:12 PM

sold my '71 C20 to Manimal aka Lance. Looked at a '67 motorhome for sale.

toms68cst · 03-25-2007, 09:16 PM

I think I figured out why my fuel gauge isn't working. Now to fix it!

72chevy327 · 03-25-2007, 09:18 PM

Took my long box off and ordered almost a whole new short box. also striped the interior. feels good to finally get to work on my truck after its been sitting for a year.

Captain Knievel · 03-25-2007, 09:37 PM

Installed the white gauges from whitegauges.net. The interior is starting to come together. Next weekend I put the door panels and new cranks in, as well as the blue LED lights (Thanks to 70c10 for the mod tips here

).

BEFORE

IN PROGRESS

The gauges
Before

After

1BadSS · 03-25-2007, 09:33 PM

Picked up a crate 350, set or ralleys, good used qjet, owners manual, glovebox door.

TONE · 03-25-2007, 09:52 PM

Installed the side and wing windows, worked on the doors, drilled the holes in my new hood for the "Chevrolet" which was nerve wracking, primed, painted, cleared the hood and endgate, installed them, played soccer with the family, then went on a bicycle ride with my son. I'm pooped! (and sore!)

mfarmer · 03-25-2007, 09:58 PM

Took the front clip off. Taking it to a body guy in the next couple of days. He will be replacing the rocker panels, kick panels and part of the floor boards.

smbrouss70 · 03-25-2007, 10:00 PM

I got my ECE hidden Hitch installed on the stepside, and disassembled my 70 3/4 ton parts truck to a bare frame. I'm pooped, too!

Pl4yboy · 03-25-2007, 10:19 PM

Caught about 200 Crappie

Good eats.

harmsy · 03-25-2007, 10:25 PM

Put on new plug wires, plugs, HEI dist, rotor, new headlights, replaced a couple side marker bulbs.........drank some whiskey........no carburator yet so couldn't take it for a spin. Hopefully soon !!!!

49studebaker · 03-25-2007, 10:45 PM

Quote:

Originally Posted by harmsy

Put on new plug wires, plugs, HEI dist, rotor, new headlights, replaced a couple side marker bulbs.........drank some whiskey........no carburator yet so couldn't take it for a spin. Hopefully soon !!!!

Whiskey/spin just as well...Only kidding. I worked a 12 hour nite shift Saturday and I'm currently working 12 tonite, all overtime, so I can afford to purchase bedsides from a vendor on this board. Hey, ya gotta pay to play!

Rollie396 · 03-26-2007, 03:16 AM

geez guys early monday morning and I'm already digging to the second page for the wdygdtw post.
here it is.....chop tack tack tack grind and some gardening too.

cstm68 · 03-25-2007, 10:29 PM

got all the rest of the parts i wanted off my parts truck and got it ready to tow to my high schools auto shop to strip the rest of the way

724x4a/cchevy · 03-25-2007, 10:35 PM

removed the tranny from my blue 72. The flex-plate has had a missing tooth ever since we owned it, and the 2 month old starter wasn't engauging right and tearing the flex plate up even more. Turns out the starter needed to be shimmed away from the block and cracked the starter housing. Thanks to oreilly's lifetime warranty it was free!!! Got the driveshaft/tranny out saturday and today (sunday) dad and i replaced the flexplate, tranny and the starter. Now it sounds like butter

All better!! Also got an electronic flasher from oreilly's and now my led brake lights work perfectly!
Justin

**special-K** · 03-26-2007, 10:06 AM

Went to a soggy swap meet.Found a n.o.s.`67 front fender for $100.Bought new tires for my work truck.Sunday I pulled exhaust manifold of my short K/10.

stingray72 · 03-26-2007, 10:15 AM

Drove 300 miles each way to yellow69's house to eat some BBQ and pick up some bumper brackets. Truck ran like a top!

RustyParts · 03-26-2007, 10:44 AM

Smeared some paint on the dash and bulkhead.

bobthecop · 03-26-2007, 12:07 PM

Quote:

Originally Posted by RustyParts

Smeared some paint on the dash and bulkhead.

That's some pretty good smearing, wish I could smear that good.

I only did what I couldn't get out of, turns out I got out of most all of it.

Chevyholic · 03-26-2007, 10:37 AM

Finally got my exhaust installed, fabricated a license plate lamp bracket and put it on. Got my safety inspection and went for my first "legal" ride in the truck!!

03-25-2007, 04:44 PM	#1
70GMCer Senior Member Join Date: Apr 2005 Location: Joppa, Maryland Posts: 4,408	What did you get done this weekend I removed the front suspension from my 84 burb to get ready to install on my 70 GMC..... Attached Images __________________ 1997 GMC Sierra Ext 1965 Mustang

03-25-2007, 07:04 PM	#2
ronh72c10 Senior Member Join Date: Jul 2003 Location: Mount Forest, Ontario, Canada Posts: 978	Re: What did you get done this weekend I replaced the bottom portion of the battery tray and powder coated it, repaired the pass inner fender and core support for the c10. And finished my portable infrared (actually radient heat) propane fueled powder coat curing stand. Ron __________________ 72 Chevy C10 (rust repaired, starting body work) 72 GMC 3/4ton 4x4 72 Chevy C20 Suburban 38 Ford Tudor Humpback Sedan (from the darkside) 67 Pontiac Parisienne 55 Studebaker Commander 2dr Hardtop (Starliner) My Youtube channel with Video Updates!

03-25-2007, 07:27 PM	#3
mike nutt 69fatmotor Join Date: Oct 2005 Location: bama Posts: 660	Re: What did you get done this weekend got the truck color sanded and buffed this weekend , also got the truck out of the shop and cleand it up and took it for a ride . here's a couple of pics. Last edited by mike nutt; 02-22-2009 at 08:52 PM.

03-25-2007, 08:00 PM	#4
Wootdog Senior Member Join Date: Jan 2001 Location: Virginia Beach, Va, USA Posts: 1,680	Re: What did you get done this weekend I put inner and outer tie rods on my 68 short wide. Then I greased the front end. Used the 67 stepside to go get the parts. Wootdog. __________________ 1967 C10 Got it back after three years Boy I sure missed Peppy 1969 Chevelle 1990 IROC Z Convertible 2002 Silverado LT

03-25-2007, 09:00 PM	#5
72CSTC5 Account Suspended Join Date: Nov 2004 Location: Deer Park, Tx. Posts: 2,522	Re: What did you get done this weekend Absoutely nothing. Sick with a cold since Friday night.

03-25-2007, 09:03 PM	#6
BurnoutNova Registered User Join Date: Mar 2004 Location: CA Posts: 2,057	Re: What did you get done this weekend i cleaned out the garage... spent about 4 hours on it today and i still aint done

03-25-2007, 09:12 PM	#7
bad_turbo turbo enthusiast Join Date: Jan 2004 Location: carmichael, ca. Posts: 1,826	Re: What did you get done this weekend sold my '71 C20 to Manimal aka Lance. Looked at a '67 motorhome for sale. __________________ "But daddy, I didn't hit them all with a stick"...what my 6 year old tells me when I pick him up from school early for fighting "

03-25-2007, 09:16 PM	#8
toms68cst Registered User Join Date: Jun 2000 Location: Bismarck, ND Posts: 4,296	Re: What did you get done this weekend I think I figured out why my fuel gauge isn't working. Now to fix it! __________________ Unrestored 68 C-10 CST. Original 327. 4-Speed CH465. 50k or so miles. TREASURER, Drum Brake Club.

03-25-2007, 09:18 PM	#9
72chevy327 Registered User Join Date: Apr 2006 Location: edmonton ab ca Posts: 88	Re: What did you get done this weekend Took my long box off and ordered almost a whole new short box. also striped the interior. feels good to finally get to work on my truck after its been sitting for a year.

03-25-2007, 09:37 PM	#10
Captain Knievel Senior Member Join Date: Feb 2007 Location: Seattle, WA Posts: 458	Re: What did you get done this weekend Installed the white gauges from whitegauges.net. The interior is starting to come together. Next weekend I put the door panels and new cranks in, as well as the blue LED lights (Thanks to 70c10 for the mod tips here ). BEFORE IN PROGRESS The gauges Before After __________________ 1970 C10

03-25-2007, 09:33 PM	#11
1BadSS NOT REALLY BANNED! Join Date: Jul 2004 Location: Shawnee, KS Posts: 1,072	Re: What did you get done this weekend Picked up a crate 350, set or ralleys, good used qjet, owners manual, glovebox door. __________________ 1987 Mustang Coupe - 2.7 Stroker, 78mm turbo, Stainless header, 3" Exh, FMIC, 160lb/hr Injectors, MS3, twin walbro 255's, 34psi. Eating V8's daily. 04 Pontiac GTO 04 Ford Mustang GT 68 C20 LWB stripper truck 73 K5 Cheyenne 76 C20 Sierra Crew SRW 88 K20 Suburban I'm not hammering on metal just to hammer, i'm creating a piece of art.

03-25-2007, 09:52 PM	#12
TONE Registered User Join Date: Jan 2007 Location: IOWA Posts: 58	Re: What did you get done this weekend Installed the side and wing windows, worked on the doors, drilled the holes in my new hood for the "Chevrolet" which was nerve wracking, primed, painted, cleared the hood and endgate, installed them, played soccer with the family, then went on a bicycle ride with my son. I'm pooped! (and sore!) Attached Images __________________ 67 C 20 BOWTIE (IN PROGRESS) - 1972 350 ENGINE - MUNCIE SM 420 - 4.56 GEARS

03-25-2007, 09:58 PM	#13
mfarmer Registered User Join Date: Sep 2006 Location: Georgetown, Texas Posts: 97	Re: What did you get done this weekend Took the front clip off. Taking it to a body guy in the next couple of days. He will be replacing the rocker panels, kick panels and part of the floor boards.

03-25-2007, 10:00 PM	#14
smbrouss70 Registered User Join Date: Sep 2003 Location: Rayne, LA Posts: 2,781	Re: What did you get done this weekend I got my ECE hidden Hitch installed on the stepside, and disassembled my 70 3/4 ton parts truck to a bare frame. I'm pooped, too! __________________ Steven "If dogs don't go to heaven, when I die I want to go wherever they went." -- Will Rogers R.I.P. Oscar R.I.P. Ratchet 1967 Pontiac GTO - Dad was the Original Owner 1970 Chevy 2wd SWB "Oscar's Truck" 1970 Chevy 2wd Blazer "Ratchet's Blazer" 2013 Chevy 2500HD Crew Cab Duramax/Allison Z71 LTZ "Brown Sugar" 2017 Chevy Suburban "BDB" 2020 Chevy Blazer Premier "Foxy" Member of Louisiana Classic Truck Club (LCTC) Shop Build

03-25-2007, 10:19 PM	#15
Pl4yboy Freeeeee Mason... Join Date: Sep 2006 Location: McAlester, Oklahoma Posts: 320	Re: What did you get done this weekend Caught about 200 Crappie Good eats.



Register or Log In To remove these advertisements.

03-25-2007, 10:25 PM	#16
harmsy Registered User Join Date: Jan 2007 Location: Iowa Posts: 100	Re: What did you get done this weekend Put on new plug wires, plugs, HEI dist, rotor, new headlights, replaced a couple side marker bulbs.........drank some whiskey........no carburator yet so couldn't take it for a spin. Hopefully soon !!!! Attached Images __________________ God bless the USA 1972 Chevrolet Cheyene Super ......

03-26-2007, 03:16 AM	#18
Rollie396 someday it will be done! Join Date: Sep 2004 Location: Lloydminster,AB. Canada Posts: 1,620	Re: What did you get done this weekend geez guys early monday morning and I'm already digging to the second page for the wdygdtw post. here it is.....chop tack tack tack grind and some gardening too. Attached Images __________________ '72 C-10 Proud owner of a million new and used pieces that used to be and will once again be(god willing) a testament to the term "they don't build em like that anymore. '80 LWB 2wd beater '67 GMC long fleet (cab donor) '66 long step (parked till it's turn comes around) '65 short step (parts truck that will donate it's bed and possibly frame to the '66) '06 Grand Prix wife's car (she hardly lets me touch it) my pics

03-25-2007, 10:29 PM	#19
cstm68 Registered User Join Date: Jan 2007 Location: shoreline, wa Posts: 1,565	Re: What did you get done this weekend got all the rest of the parts i wanted off my parts truck and got it ready to tow to my high schools auto shop to strip the rest of the way

03-25-2007, 10:35 PM	#20
724x4a/cchevy Self-proclaimed LED man Join Date: Nov 2003 Location: Harrisburg, Missouri Posts: 1,021	Re: What did you get done this weekend removed the tranny from my blue 72. The flex-plate has had a missing tooth ever since we owned it, and the 2 month old starter wasn't engauging right and tearing the flex plate up even more. Turns out the starter needed to be shimmed away from the block and cracked the starter housing. Thanks to oreilly's lifetime warranty it was free!!! Got the driveshaft/tranny out saturday and today (sunday) dad and i replaced the flexplate, tranny and the starter. Now it sounds like butter All better!! Also got an electronic flasher from oreilly's and now my led brake lights work perfectly! Justin __________________ My LED Website My Photobucket Album of LED's Ask me about hand-made custom L.E.D brake and reverse lights. <- LINK I also do LED: -Third Brake/Cargo -Brake (truck and burb) -Reverse (truck and burb) -67-68 Front Turn Signals -69-70 Front Turn Signals -71-72 Front Turn Signals -GMC Front Turn Signals I can also do custom lights for other vehicles....i did a set for a AMC Gremlin once Norwood Survivor Last edited by 724x4a/cchevy; 03-25-2007 at 10:38 PM.

03-26-2007, 10:06 AM	#21
special-K Special Order Join Date: Nov 2004 Location: Mt Airy, MD Posts: 85,851	Re: What did you get done this weekend Went to a soggy swap meet.Found a n.o.s.`67 front fender for $100.Bought new tires for my work truck.Sunday I pulled exhaust manifold of my short K/10. __________________ "BUILDING A BETTER WAY TO SERVE THE USA"......67/72......"The New Breed" GMC '67 C1500 Wideside Super Custom SWB: 327/M22/3.42 posi.........."The '67" (project) GMC '72 K2500 Wideside Sierra Custom Camper: 350/TH350/4.10 Power-Lok..."The '72" (rolling) Tim "Don't call me a redneck. I'm a rough cut country gentleman" R.I.P. ~ East Side Low Life ~ El Jay ~ 72BLUZ ~ Fasteddie69 ~ Ron586 ~ 67ChevyRedneck ~ Grumpy Old Man ~

03-26-2007, 10:15 AM	#22
stingray72 Red Headed Step Child Join Date: Oct 2003 Location: Atlanta, GA Posts: 1,216	Re: What did you get done this weekend Drove 300 miles each way to yellow69's house to eat some BBQ and pick up some bumper brackets. Truck ran like a top! __________________ "Dinner, the perfect break between work and drunk" -Homer Simpson

03-26-2007, 10:44 AM	#23
RustyParts Registered User Join Date: May 2006 Location: Wyman, Kentucky Posts: 403	Re: What did you get done this weekend Smeared some paint on the dash and bulkhead. Attached Images __________________ 1972 GMC Jimmy, 4WD, 454 CI, 350 Turbo, 4" lift, 35" tires The math teacher said my son "Bubba" could be a mathmatical genius. cause he's got 13 fingers!

03-26-2007, 10:37 AM	#25
Chevyholic Will it run today? Join Date: Feb 2007 Location: DFW, Texas Posts: 272	Re: What did you get done this weekend Finally got my exhaust installed, fabricated a license plate lamp bracket and put it on. Got my safety inspection and went for my first "legal" ride in the truck!! __________________ Jaws, the 1971 Chevy Cheyenne Longbed. She's big, grey, and has an insatiable appetite!

Register or Log In To remove these advertisements.