What did you get done? 4/08/07 - The 1947 - Present Chevrolet & GMC Truck Message Board Network

1969k10stepside · 04-08-2007, 09:03 PM

I cleaned and painted the Np205 skidplate for the 71 shortbed.Also cleaned and painted the V8 motor mount crossmember.Managed to get most of the new short fleet bed apart.Also did a little more work taking the cab apart.

BACKYARD88 · 04-08-2007, 09:12 PM

Cut the spring perches off of the rear axle, built half of a rear notch, cooked and ate Easter dinner

.

19673ontree · 04-08-2007, 09:22 PM

here in southrust virginia it was too cold to do much , but I did repair the lip of my hood (WELDING IS WARM) cut the tab's off the cowl panel where it bolt's on moved them and rewelded them then painted under the cowl pan and installed it , that's about it ,,,,,,

centsless · 04-08-2007, 09:42 PM

I replaced the incorrect rear bumper on my truck....
From this...
Attachment 257423
to this....

Attachment 257424

Attachment 257425

skokie · 04-08-2007, 09:47 PM

I got my exhaust manifolds and alternator installed.

dave2953 · 04-08-2007, 10:01 PM

I got the tin in the cluster painted for my faux white overlay look and painted the needles, too. The bezel is getting replaced with one that has the holes for gauges. Not a lot of progress....baby steps.

*rage'nrat638* · 04-08-2007, 11:18 PM

Quote:

Originally Posted by skokie

I got my exhaust manifolds and alternator installed.

looks great brad

jeffspower · 04-08-2007, 09:50 PM

I went on a parts trip- almost 600 miles thru SE Iowa & back Saturday. I scored a Blazer tub & frame (board member), pickup cab (ebay, no pics yet), LH fender (board member), a 88- up bench seat (ebay), and a set of black seat belts (ebay).

AKChevyman · 04-08-2007, 09:54 PM

I got the freshly painted hood on my buddy's 66. Then we concentrated on my truck and we got the grill fitted. Then we modded the heck out of the Grill brace to make it fit the repop grill. We then topped it off by slapping the hood on.

bouncytruck · 04-08-2007, 09:58 PM

We managed a couple custom paint jobs on some hard boiled eggs. Then I ate lots of ham, rolls, jelly beans and chocolate easter eags.

PanelDeland · 04-08-2007, 10:04 PM

I replaced an attic fan,a flapper valve in a toitie,Dissassembled the stove to get a # off a switch,put it back together to use until the switch gets here.Cleared a little spot on my workbench,Took Mrs P to lunch Fri.,bought and set up a DVD TV unit (one of the 8" screen){I have an Ulterior motive for that}.Did a trip to the bookstore (finally found "Truck Builder"(need to send them a resume')Scored a 1/64 Blazer in green,Got new glasses,(I can see clearly now)Trimmed my beard to summer spec(then the temp dropped 30*).
I also scored a cheap Surround system for one of the Tv's and a canvas Gazebo for Mrs.P to sit in during Muskeeter season.I will be out of town for the next four weekends traveling to Charlotte,Tx to see family,and Maggie Valley.Mrs P pointed out that she would like for a few of my "Honey Do's" to be done.

**Palf70Step** · 04-08-2007, 10:21 PM

Nothing but yard work and TMNT with my son.

msgross · 04-08-2007, 10:36 PM

cancelled all plans since all three lil ones were sick. 40 degrees outside is to cold for yardwork for me so we caught up on housework (damn i'm whipped)

drman929 · 04-08-2007, 11:00 PM

I helped a friend get his boat motor running and then stabbed in the new HEI in my '72. In the process, I've seemed to have lost my + wire....but it'll get back together somehow.

*rage'nrat638* · 04-08-2007, 11:12 PM

slaped the vortec heads on my 355

still working on it this next week hope to drop it in next weekend

this is where she stand right now

**clay68c10** · 04-08-2007, 11:10 PM

2 new u-joints for the 68, mowed the back yard, also smoked a ham for din-din. And then attempted to un-clog the kitchen sink, 25ft snake is too short...

IvelDesigns · 04-08-2007, 11:10 PM

Got the rear of my truck up on jack stands and started the tear down. Went and had new U-bolts bent at the local truck shop. Put a coat of rust inhib paint on my freshly blasted trailing arms. got the old trailing arms and coils out of the truck and started workin' on flippin' the carrier bearing mount. I also put my front bag cups in the lathe and cut them down to 1 inch. Made a quick stop by the welder shop/metal supply and picked up a couple 1" chunks of 4" dia tube to use for my x-member mod.

I scribbed the circles on the X-member for the exhaust cut outs, but when i went to use the torch to cut them, i realized i was out of oxygen. :/

timcos · 04-09-2007, 12:03 AM

Replaced right ram horn manifold (cracked(, donut gaskets, bolts for the donut gasket holders (not sure of the flange name).

Sounds real nice now.

But now I think I can hear my power steering pump grinding...or something like that.

Tim

stllookn · 04-09-2007, 01:39 AM

Got the grill back to the stock white color and some "driver quality" trim around it. Installed the stock front swaybar while I was at it.

Draggn66 · 04-09-2007, 01:48 AM

Started gettin the bodywork done. Fixed a couple small dents, sanded, removed trim, sanded, sanded some more, Did I mention I was sanding?

RACINJASON22 · 04-09-2007, 02:03 AM

If you read about the snow snow snow we got around here you will no why I didn't work on the truck this weekend but I I did drink too much celebrating my newly aquired older age!

Draggn66 did you happen to do any sanding while you were doing your body work?

Draggn66 · 04-09-2007, 02:21 AM

Quote:

Originally Posted by RACINJASON22

Draggn66 did you happen to do any sanding while you were doing your body work?

yea just a bit!

*72lb4x4* · 04-09-2007, 04:43 AM

Went to the swap meet. Manageded to not buy a sweet looking 4x4 short bed 60-66 with the front clip in the bed. That was a challenge.

Remodeling the master bath. Got the new tub in, backer board, sheetrock everyhere else, first coat of mud. Also pulled down and put up some ceiling, redid some plumbing, etc.

Didn't touch the truck

but that first coat sure make it feel like progress has been made. 5 weeks into it, 2 weeks of that out of town in NE CO. Not too bad for a lazy old dog...

67ChevyRedneck · 04-09-2007, 08:42 AM

Put new carpet and 3 point belts in the truck.

04-08-2007, 09:03 PM	#1
1969k10stepside Registered User Join Date: Mar 2006 Location: USA Posts: 21,019	What did you get done? 4/08/07 I cleaned and painted the Np205 skidplate for the 71 shortbed.Also cleaned and painted the V8 motor mount crossmember.Managed to get most of the new short fleet bed apart.Also did a little more work taking the cab apart.

04-08-2007, 09:12 PM	#2
BACKYARD88 On the fast track to nowhere.. Join Date: May 2006 Location: Splendora, Texas Posts: 5,316	Re: What did you get done? 4/08/07 Cut the spring perches off of the rear axle, built half of a rear notch, cooked and ate Easter dinner . __________________ -Mike Owen- Support the board here! 71 Chevy short fleet build thread Double D Norwood, Houston, Cecilia, Jackson, Monroe and counting

04-08-2007, 09:22 PM	#3
19673ontree CAN'T FIX NOTHIN Join Date: Sep 2006 Location: SOUTHRUST VIRGINIA !!! Posts: 2,112	Re: What did you get done? 4/08/07 here in southrust virginia it was too cold to do much , but I did repair the lip of my hood (WELDING IS WARM) cut the tab's off the cowl panel where it bolt's on moved them and rewelded them then painted under the cowl pan and installed it , that's about it ,,,,,, __________________ 1967 C10 Shortbed Fleetside Small back glass 6 cyl 3spd on the tree 3.08 gears underdash AC

04-08-2007, 09:42 PM	#4
centsless sufficiently talented fool Join Date: Jun 2006 Location: Forest Hill, MD Posts: 2,231	Re: What did you get done? 4/08/07 I replaced the incorrect rear bumper on my truck.... From this... Attachment 257423 to this.... Attachment 257424 Attachment 257425 __________________ "it's impossible to be surrounded by idiots when you are part of the circle" 2003 Suburban 2002 Pontiac Montana 1981 Corvette 1966 Impala Convertible Click here to support the board Last edited by centsless; 10-04-2007 at 08:52 PM.

04-08-2007, 09:47 PM	#5
skokie Registered User Join Date: Oct 2003 Location: San Jose Ca. Posts: 3,354	Re: What did you get done? 4/08/07 I got my exhaust manifolds and alternator installed. __________________ RIP to my son Dylan. 5/17/2002 - 8/18/2018 If you want to know more about rare forms of pediatric cancer or if you want to help fund pediatric cancer research, please check out the website for the non-profit I started. https://slothforpedcancer.org 68 build thread http://67-72chevytrucks.com/vboard/s...d.php?t=223234

04-08-2007, 10:01 PM	#6
dave2953 Dave's not here, man Join Date: Jun 2004 Location: Winder, Georgia Posts: 2,000	Re: What did you get done? 4/08/07 I got the tin in the cluster painted for my faux white overlay look and painted the needles, too. The bezel is getting replaced with one that has the holes for gauges. Not a lot of progress....baby steps. __________________ - 2014 VW Jetta - 2015 VW Jetta - 1966 Ford F-250 Last edited by dave2953; 04-08-2007 at 10:03 PM. Reason: Forgot the pic

04-08-2007, 09:50 PM	#8
jeffspower Well, Whoop-dee-do! Join Date: Mar 2003 Location: Easton, Mo. pop.- me & scarcely a few others Posts: 2,302	Re: What did you get done? 4/08/07 I went on a parts trip- almost 600 miles thru SE Iowa & back Saturday. I scored a Blazer tub & frame (board member), pickup cab (ebay, no pics yet), LH fender (board member), a 88- up bench seat (ebay), and a set of black seat belts (ebay). Attached Images __________________ '68 GMC shortbox 4x4 350/SM465/T221- bought it in '83 SOLD '72 K20 500 Cad/TH400/NP205 SOLD '92 Chevy 2500 6.5 mech TD 4L80E crusty daily driver '72 Monte Carlo... sweet low mile toy '11 Dodge Challenger IE 392 6spd... midlife car

04-08-2007, 09:54 PM	#9
AKChevyman Chevy Forever Join Date: Jun 2005 Location: Dalzell SC Posts: 314	Re: What did you get done? 4/08/07 I got the freshly painted hood on my buddy's 66. Then we concentrated on my truck and we got the grill fitted. Then we modded the heck out of the Grill brace to make it fit the repop grill. We then topped it off by slapping the hood on. Attached Images __________________ My first love 1971 C20 Hugger orange Getting face lift and heart transplant .30 402 BB /TH400 and GV Wifes car 1969 Chevelle SS 396 325hp/TH400 Factroy A/C Automatic w/ Floor shift console. restored. Last edited by AKChevyman; 04-08-2007 at 09:55 PM.

04-08-2007, 09:58 PM	#10
bouncytruck SKINNY TIRES RULE! Join Date: Sep 2001 Location: Bothell, WA Posts: 11,038	Re: What did you get done? 4/08/07 We managed a couple custom paint jobs on some hard boiled eggs. Then I ate lots of ham, rolls, jelly beans and chocolate easter eags. __________________ bouncytruck 1972 K5 The Hauler 1994 K1500 Suburban The Daily2010 Kia Soul Wife's Ride2014 Fiat 500L

04-08-2007, 10:04 PM	#11
PanelDeland I am a Referee of life. Join Date: Jun 2000 Location: Greensboro N.C. Posts: 13,992	Re: What did you get done? 4/08/07 I replaced an attic fan,a flapper valve in a toitie,Dissassembled the stove to get a # off a switch,put it back together to use until the switch gets here.Cleared a little spot on my workbench,Took Mrs P to lunch Fri.,bought and set up a DVD TV unit (one of the 8" screen){I have an Ulterior motive for that}.Did a trip to the bookstore (finally found "Truck Builder"(need to send them a resume')Scored a 1/64 Blazer in green,Got new glasses,(I can see clearly now)Trimmed my beard to summer spec(then the temp dropped 30). I also scored a cheap Surround system for one of the Tv's and a canvas Gazebo for Mrs.P to sit in during Muskeeter season.I will be out of town for the next four weekends traveling to Charlotte,Tx to see family,and Maggie Valley.Mrs P pointed out that she would like for a few of my "Honey Do's" to be done. __________________ The 47-present Chevrolet and GMC Truck Message Board Network,it's owners,moderators,members,and associates of any type should not be held responsible for my opinion.* You can't fix stupid,not even with duct tape. "My appearance is due to the fact that "GOD" does punish you for having too much fun!" Barrett-Jackson has perfected alchemy,they make rust into gold! "You can lead a horse to water but you can't saddle a duck" "Cleverly disguised as a 'Responsible Adult' "Sometimes your Knight in shining armor is just a retard in tinfoil"

04-08-2007, 10:21 PM	#12
Palf70Step State of Confusion! Join Date: Jul 2002 Location: Gulfport, MS USA Posts: 47,216	Re: What did you get done? 4/08/07 Nothing but yard work and TMNT with my son. __________________ Bill 1970 Chevy Custom/10 LWB Fleetside 2010 Toyota Tacoma PreRunner SR5 Double Cab - DD Member of Louisiana Classic Truck Club (LCTC) Bill's Gallery Life isn't tied with a bow, but it's still a gift. Live simply. Love generously. Care deeply. Speak kindly. Leave the rest to God!

04-08-2007, 10:36 PM	#13
msgross Registered User Join Date: Jul 2006 Location: Central PA Posts: 12,201	Re: What did you get done? 4/08/07 cancelled all plans since all three lil ones were sick. 40 degrees outside is to cold for yardwork for me so we caught up on housework (damn i'm whipped) __________________ The Garage: 1968 K-10 SWB - "Project Money Pit" 1996 Z-71 - "huntin rig" 1969 C-10 LWB (SOLD) "Project flip that truck or else" 1993 Passport, F@rd 1-ton (SOLD)"Project Cousin Eddie" My Garage Build "The 1,000 footer"

04-08-2007, 11:00 PM	#14
drman929 Registered User Join Date: Nov 2006 Location: Arkansas Posts: 232	Re: What did you get done? 4/08/07 I helped a friend get his boat motor running and then stabbed in the new HEI in my '72. In the process, I've seemed to have lost my + wire....but it'll get back together somehow.

04-08-2007, 11:12 PM	#15
rage'nrat638 Account Suspended Join Date: Mar 2003 Location: THE FALL GUY CHICAGO IL Posts: 5,883	Re: What did you get done? 4/08/07 slaped the vortec heads on my 355 still working on it this next week hope to drop it in next weekend this is where she stand right now Last edited by rage'nrat638; 07-12-2007 at 06:54 AM.

04-08-2007, 11:10 PM	#16
clay68c10 Senior Member Join Date: Aug 2004 Location: Centennial, CO Posts: 2,990	Re: What did you get done? 4/08/07 2 new u-joints for the 68, mowed the back yard, also smoked a ham for din-din. And then attempted to un-clog the kitchen sink, 25ft snake is too short... __________________ ClusterTruck: 68 C10 Bought in 89, wrecked in 03. Slow low $ rebuild started '17. 6.0 & TKO http://67-72chevytrucks.com/vboard/s...d.php?t=788602 93 K1500 Short Step, 350, NV4500, EBL flash ECU. Vortec heads & roller cam someday... 05 Jeep Wrangler Unlimited. 3” lift & 6-speed 02 E320 the insurance total “free car” 13 Tahoe LTZ



Register or Log In To remove these advertisements.

04-08-2007, 11:10 PM	#17
IvelDesigns Commander Taco Bello Join Date: Sep 2006 Location: Des Moines, Iowa Posts: 2,232	Re: What did you get done? 4/08/07 Got the rear of my truck up on jack stands and started the tear down. Went and had new U-bolts bent at the local truck shop. Put a coat of rust inhib paint on my freshly blasted trailing arms. got the old trailing arms and coils out of the truck and started workin' on flippin' the carrier bearing mount. I also put my front bag cups in the lathe and cut them down to 1 inch. Made a quick stop by the welder shop/metal supply and picked up a couple 1" chunks of 4" dia tube to use for my x-member mod. I scribbed the circles on the X-member for the exhaust cut outs, but when i went to use the torch to cut them, i realized i was out of oxygen. :/ __________________ Bagged '50 3600 - Bumper punchin' road kill since 2009... Bagged '69 C10 Longbed - Bumper punchin' road kill since 2007...

04-09-2007, 12:03 AM	#18
timcos Chief Honcho In Charge Join Date: Aug 2006 Location: Bentonville AR Posts: 970	Re: What did you get done? 4/08/07 Replaced right ram horn manifold (cracked(, donut gaskets, bolts for the donut gasket holders (not sure of the flange name). Sounds real nice now. But now I think I can hear my power steering pump grinding...or something like that. Tim __________________ 1992 1500 4x4 Shortbed 1984 Ford F250 Supercab Longbed 6.9L Diesel 1972 K10 Cheyenne Super Fleetside Short Bed - 350 - A/C 1971 VW SuperBeetle 1960 Wife 1984 Son 1986 Son 1989 Son Previous Trucks 1967 C10 SWB (1980-1981) 1971 C10 LWB (1998-2004)

04-09-2007, 01:39 AM	#19
stllookn Saving 1 truck at a time! Join Date: Aug 2001 Location: Kent, WA Posts: 6,465	Re: What did you get done? 4/08/07 Got the grill back to the stock white color and some "driver quality" trim around it. Installed the stock front swaybar while I was at it. Attached Images __________________ '68 C20 Longhorn 50th Anniversary 400/TH400 '68 C20 Longhorn 50th Anniversary 468/TH400w/buckets '72 C20 Halfhorn (Longhorn w/o cab and front clip) '69 Flxible Cruiser (look up ugly in the dictionary)

04-09-2007, 01:48 AM	#20
Draggn66 Wrenchin & Sandin!!! Join Date: Aug 2006 Location: Joliet, IL. Posts: 523	Re: What did you get done? 4/08/07 Started gettin the bodywork done. Fixed a couple small dents, sanded, removed trim, sanded, sanded some more, Did I mention I was sanding? __________________ Randy Shorewood, IL. My Favorite eBay Searches My Driver Restore Thread 1971 C10 Longbed 2005 Silverado Shortbed 2005 FXDWG

04-09-2007, 02:03 AM	#21
RACINJASON22 GEARHEAD Join Date: Jan 2007 Location: CENTRAL,PA Posts: 2,284	Re: What did you get done? 4/08/07 If you read about the snow snow snow we got around here you will no why I didn't work on the truck this weekend but I I did drink too much celebrating my newly aquired older age! Draggn66 did you happen to do any sanding while you were doing your body work? __________________ 72 SWB 2WD MY PROJECT 72 LWB 4X4 FUTURE PROJECT SUBSCRIBE HEREBOARD VENDORS HERE NORWOOD MEET SURVIVOR!

04-09-2007, 04:43 AM	#23
72lb4x4 Account Suspended Join Date: Jul 2006 Location: DFW Posts: 1,427	Re: What did you get done? 4/08/07 Went to the swap meet. Manageded to not buy a sweet looking 4x4 short bed 60-66 with the front clip in the bed. That was a challenge. Remodeling the master bath. Got the new tub in, backer board, sheetrock everyhere else, first coat of mud. Also pulled down and put up some ceiling, redid some plumbing, etc. Didn't touch the truck but that first coat sure make it feel like progress has been made. 5 weeks into it, 2 weeks of that out of town in NE CO. Not too bad for a lazy old dog... Last edited by 72lb4x4; 04-09-2007 at 04:46 AM. Reason: Why not. Typos, tec...

04-09-2007, 08:42 AM	#24
67ChevyRedneck Hittin E-Z Street on Mud Tires Join Date: Nov 2004 Location: Greenville, SC Posts: 23,090	Re: What did you get done? 4/08/07 Put new carpet and 3 point belts in the truck. __________________ Jesse James 1967 C10 SWB Stepside: 350/700R4/3.73 1965 Ford Mustang: 289/T5-5spd/3.25 Trac-Loc 1968 Pontiac Firebird: Project Fire Chicken! 2015 Silverado Double Cab 5.3L Z71 2001 Jeep Wrangler Sport 4.0L 5spd 2020 Chevrolet Equinox Premium 2.0L Turbo 2011 Mustang V6 ~ Wife's ride American Born, Country by the Grace of God 1967 CST Shop Truck Rebuild! My 1967 C-10 Build Thread My Vintage Air A/C Install Project "On a Dime" Trying my hand at Home Renovation! 1965 Mustang Modifications!

Register or Log In To remove these advertisements.