What's it worth? SWB frame, ohio area... - The 1947 - Present Chevrolet & GMC Truck Message Board Network

Longhorn Man · 04-13-2007, 04:56 PM

Goin to look at a short/step to purchace, mostly to part out. Seller talls me it is a total crap box, so the main piece that would bring in some money would be the frame.
So, lets say it is not rusted real bad, just the normal surface rust, came with a title, and a drivers door jamb (69, clear Florida title) What would it be worth as a bare frame?
How about as a roller with a probably worn out drum brake set up?

BowTieOgre · 04-13-2007, 05:05 PM

If it has usable trailing arms, control arms and a PS box I would say around $275. Also depends on rearend gearing and posi status.

meathead95 · 04-13-2007, 05:14 PM

i would say 250 with an open rear and 400 with a posi. and no pitting. if it is pitted i think it will be hard to sell

BarryB · 04-13-2007, 05:41 PM

Really depends on WHO wants it. I had one put it on ebay twice didn't sell. So I basically gave it away. 50 bucks. But I live in Northeast Tn. so maybe they are more plentiful here then there.

msgross · 04-13-2007, 05:45 PM

We just had one locally sell on Ebay for $391: 69 short bed/ very rusted with all body panels except tailgate, clean title. Not much to save except a vin plate, hood and frame by the looks of the picture...

Alvin · 04-14-2007, 12:27 AM

Hey Andy, let me know if it's got a 3.73 rear in it (I assume it's coil), I have a 3.07 5-lug I'd be willing to swap ya

Longhorn Man · 04-14-2007, 01:19 AM

Adam...it was an inline 6 3 speed truck originally, so unless otherwise optioned, yes, it'll be a 3.73 rear.
PM me your phone number... I'll let you know what happens. I'm not 100% sure on if I am getting this or not, but I have my guns set on it.

**special-K** · 04-14-2007, 10:39 AM

I`d say try to get the crap box for $300 or less.

Longhorn Man · 04-15-2007, 08:55 AM

he is already asking less, and I'm gonna try and chew him down a bit, but it's already pretty cheap...think scrap value cheap.

**special-K** · 04-15-2007, 11:42 AM

If there`s a good 3.07 floatin`round...
I don`t know what it`s like in Ohio right now.But,around here it`s one of those hard rainin`haulin`junk back p.o.s. days.Good luck.

**jamie72** · 04-15-2007, 01:53 PM

so you buy it yet, andy?????

Longhorn Man · 04-16-2007, 05:47 AM

naaa, it was a total basket case, and the sucker wouldn't even roll. (tow bar) I coulda tried to knock the drum loose, but I don't even know if the ball joints woulda lasted the 70 miles.

The front end looked like this //------\\

04-13-2007, 04:56 PM	#1
Longhorn Man its all about the +6 inches Join Date: Jan 2001 Location: Hilliard Ohio Posts: 2,690	What's it worth? SWB frame, ohio area... Goin to look at a short/step to purchace, mostly to part out. Seller talls me it is a total crap box, so the main piece that would bring in some money would be the frame. So, lets say it is not rusted real bad, just the normal surface rust, came with a title, and a drivers door jamb (69, clear Florida title) What would it be worth as a bare frame? How about as a roller with a probably worn out drum brake set up?

04-13-2007, 05:05 PM	#2
BowTieOgre Registered User Join Date: Mar 2006 Location: Pensacola, FL Posts: 1,461	Re: What's it worth? SWB frame, ohio area... If it has usable trailing arms, control arms and a PS box I would say around $275. Also depends on rearend gearing and posi status. __________________ 1986 C10 - LWB, 305/700r4, posi, vortec heads Last edited by BowTieOgre; 04-13-2007 at 05:05 PM.

04-13-2007, 05:14 PM	#3
meathead95 computer illiterate Join Date: Jan 2001 Location: Des Moines, IA Posts: 6,440	Re: What's it worth? SWB frame, ohio area... i would say 250 with an open rear and 400 with a posi. and no pitting. if it is pitted i think it will be hard to sell __________________ 72 2wd blazer 72 swb 4x4

04-13-2007, 05:41 PM	#4
BarryB Senior Member Join Date: Jul 2006 Location: Blountville, Tn. Posts: 3,904	Re: What's it worth? SWB frame, ohio area... Really depends on WHO wants it. I had one put it on ebay twice didn't sell. So I basically gave it away. 50 bucks. But I live in Northeast Tn. so maybe they are more plentiful here then there.

04-13-2007, 05:45 PM	#5
msgross Registered User Join Date: Jul 2006 Location: Central PA Posts: 12,201	Re: What's it worth? SWB frame, ohio area... We just had one locally sell on Ebay for $391: 69 short bed/ very rusted with all body panels except tailgate, clean title. Not much to save except a vin plate, hood and frame by the looks of the picture... __________________ The Garage: 1968 K-10 SWB - "Project Money Pit" 1996 Z-71 - "huntin rig" 1969 C-10 LWB (SOLD) "Project flip that truck or else" 1993 Passport, F@rd 1-ton (SOLD)"Project Cousin Eddie" My Garage Build "The 1,000 footer"

04-14-2007, 12:27 AM	#6
Alvin Never Done? Join Date: May 2000 Location: Ohio Posts: 1,435	Re: What's it worth? SWB frame, ohio area... Hey Andy, let me know if it's got a 3.73 rear in it (I assume it's coil), I have a 3.07 5-lug I'd be willing to swap ya __________________ Ethel - The Legend Continues... Ethel has been sold.

04-14-2007, 01:19 AM	#7
Longhorn Man its all about the +6 inches Join Date: Jan 2001 Location: Hilliard Ohio Posts: 2,690	Re: What's it worth? SWB frame, ohio area... Adam...it was an inline 6 3 speed truck originally, so unless otherwise optioned, yes, it'll be a 3.73 rear. PM me your phone number... I'll let you know what happens. I'm not 100% sure on if I am getting this or not, but I have my guns set on it.

04-14-2007, 10:39 AM	#8
special-K Special Order Join Date: Nov 2004 Location: Mt Airy, MD Posts: 85,851	Re: What's it worth? SWB frame, ohio area... I`d say try to get the crap box for $300 or less. __________________ "BUILDING A BETTER WAY TO SERVE THE USA"......67/72......"The New Breed" GMC '67 C1500 Wideside Super Custom SWB: 327/M22/3.42 posi.........."The '67" (project) GMC '72 K2500 Wideside Sierra Custom Camper: 350/TH350/4.10 Power-Lok..."The '72" (rolling) Tim "Don't call me a redneck. I'm a rough cut country gentleman" R.I.P. ~ East Side Low Life ~ El Jay ~ 72BLUZ ~ Fasteddie69 ~ Ron586 ~ 67ChevyRedneck ~ Grumpy Old Man ~

04-15-2007, 08:55 AM	#9
Longhorn Man its all about the +6 inches Join Date: Jan 2001 Location: Hilliard Ohio Posts: 2,690	Re: What's it worth? SWB frame, ohio area... he is already asking less, and I'm gonna try and chew him down a bit, but it's already pretty cheap...think scrap value cheap.

04-15-2007, 11:42 AM	#10
special-K Special Order Join Date: Nov 2004 Location: Mt Airy, MD Posts: 85,851	Re: What's it worth? SWB frame, ohio area... If there`s a good 3.07 floatin`round... I don`t know what it`s like in Ohio right now.But,around here it`s one of those hard rainin`haulin`junk back p.o.s. days.Good luck. __________________ "BUILDING A BETTER WAY TO SERVE THE USA"......67/72......"The New Breed" GMC '67 C1500 Wideside Super Custom SWB: 327/M22/3.42 posi.........."The '67" (project) GMC '72 K2500 Wideside Sierra Custom Camper: 350/TH350/4.10 Power-Lok..."The '72" (rolling) Tim "Don't call me a redneck. I'm a rough cut country gentleman" R.I.P. ~ East Side Low Life ~ El Jay ~ 72BLUZ ~ Fasteddie69 ~ Ron586 ~ 67ChevyRedneck ~ Grumpy Old Man ~

04-15-2007, 01:53 PM	#11
jamie72 Senior Member Join Date: Apr 2000 Location: madison indiana Posts: 3,836	Re: What's it worth? SWB frame, ohio area... so you buy it yet, andy????? __________________ jamie72 72 BB cheyenne -- Restoration getting started.. member #807 http://www.myspace.com/whitetailobsession www.antlertalk.com

04-16-2007, 05:47 AM	#12
Longhorn Man its all about the +6 inches Join Date: Jan 2001 Location: Hilliard Ohio Posts: 2,690	Re: What's it worth? SWB frame, ohio area... naaa, it was a total basket case, and the sucker wouldn't even roll. (tow bar) I coulda tried to knock the drum loose, but I don't even know if the ball joints woulda lasted the 70 miles. The front end looked like this //------\\



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.