Register or Log In To remove these advertisements. |
|
|
|
Thread Tools | Display Modes |
|
04-16-2007, 12:52 AM | #1 |
Junior Member
Join Date: Mar 2007
Location: New Jersey
Posts: 26
|
Reduced!!!!!! Entire 71 C10 Project Must Go. NW Jersey
My entire project must go due to the family getting back into go-kart racing. Do not have the room or time for both so someone can get a great head start on a C10 build by buying me out, everything must go now.
Here's what I have: 71 C10 Longbed 250 3 on the tree in nice shape for age. I looked for 18 months before finding this truck. Truck needs general body work also rockers and cab corners. Cab mounts look like they were already replaced. Floors have been repaired but I would look into them deeper. Few very small holes here and there on outside of body. I inteded to convert this to V8 but could be restored or driven as is with the 250 as it is in fine shape with 75,000 (?) original miles. Great driver, starts instantly with manual choke. Parts I have (all must go together with truck): New complete gasket set for 250CI. New rear wheel cylinders (existing work fine). New rear brake shoes (existing work fine). Used Chrome front windshield trim. New rear brake cables (emergency). New rocker panel (passenger I think). Replacement windshield (existing is cracked). New rubber door moulding (one side). Used 71 inner grille (some broken plastic - existing is good condition, missing one 1" rib which I have and could be refitted). Set of factory brake lines (current ones on truck seem fine and maybe partially new). 4 used wagon wheels (american racing?) need clean and paint. 2 spare tires. used GMPP ZZ4 SBC 350 bare block std bore, fluxed and ready for rotating assmbly. One piece seal, roller cam type 95-01 (sweet block, see GMPP for specs) New Melling high volume oil pump. New Chrome Mr. Gasket bolt kit for SBC. New 1250LB engine stand with steel castors, munting hardware, powder coated ($150 new). used Lowboy engine stand on castors with mounting bolts. New engine lift plate, powder coated with universal holes for all intakes New Sun SuperTach II whiteface mounted on hood (hood already had hole for it) Bedliner installed (OK condition) Truck needs seatbelt work for passenger side (have belts) Driverside is functional but in need of attention as well. engine compartment is above average all stock no wiring messes. I can post any pics or additional info you need, just let me know. Test drives welcome. Drives nice and straight, good clutch, no rattles custom apolstered seat but off color for truck (most dont notice) no rips. Dash is good no radio. heater has been modified to include on/off switch for fan as opposed to sliding adjuster. Just about everyting works. I have to kick the bumper to get one parking light to come on, just needs cleaned and lubed. Will run 55 mph @ 1800rpm smooth ride. I have $2700 invested and searched for great deals while finding parts. I will take $2000 for everything but price is firm and no breaking up package. Deal good for Supporting Board Members Only. I just do not have the time for the administrative duties of breaking all this up and shipping to different folks. I need this package to be picked up in Columbia NJ near Delaware Water Gap. If paid for I can store indoors heated for a short time. See all pics here: Linky for pics (let me know what else you want to see.) Thanks to everyone on this board for all their help, you are all a great group of people. Shane NW Jersey
__________________
71 C-10 85ft bed 20,000BHP at wheels, runs on pump gas. "99% of being a Genius is just showin' up" -Einstien Last edited by logansrun2005; 04-19-2007 at 08:50 AM. Reason: Reduced Price |
04-16-2007, 01:35 AM | #2 |
Junior Member
Join Date: Mar 2007
Location: New Jersey
Posts: 26
|
Re: Entire 71 C10 Project Must Go. NW Jersey
Will consider trade for tandem enclosed trailer w/ramp rear door. Side door a plus too.
Shane NW Jersey
__________________
71 C-10 85ft bed 20,000BHP at wheels, runs on pump gas. "99% of being a Genius is just showin' up" -Einstien |
04-16-2007, 10:13 AM | #3 |
Junior Member
Join Date: Mar 2007
Location: New Jersey
Posts: 26
|
Re: Entire 71 C10 Project Must Go. NW Jersey
bump...
__________________
71 C-10 85ft bed 20,000BHP at wheels, runs on pump gas. "99% of being a Genius is just showin' up" -Einstien |
04-16-2007, 12:55 PM | #4 |
GEARHEAD
Join Date: Jan 2007
Location: CENTRAL,PA
Posts: 2,284
|
Re: Entire 71 C10 Project Must Go. NW Jersey
Sounds like a GR8 start for someone. I wish I would have started with a truck like this when I started mine. Some one will be interested so here's a bump for ya. Real Fair price for all thats included IMHO.
|
04-16-2007, 09:05 PM | #5 |
Junior Member
Join Date: Mar 2007
Location: New Jersey
Posts: 26
|
Re: Entire 71 C10 Project Must Go. NW Jersey
This truck has front disk brakes.
__________________
71 C-10 85ft bed 20,000BHP at wheels, runs on pump gas. "99% of being a Genius is just showin' up" -Einstien |
04-17-2007, 09:25 AM | #6 |
Junior Member
Join Date: Mar 2007
Location: New Jersey
Posts: 26
|
Re: Entire 71 C10 Project Must Go. NW Jersey
Ttt
__________________
71 C-10 85ft bed 20,000BHP at wheels, runs on pump gas. "99% of being a Genius is just showin' up" -Einstien |
04-17-2007, 01:34 PM | #7 |
SLOW BUT SURE,BUT CLOSER
Join Date: Feb 2002
Location: eleanor wv usa
Posts: 3,094
|
Re: Entire 71 C10 Project Must Go. NW Jersey
Good lookin' project!!! Somebody better grab it!!!!
__________________
69 C-10, OWNED 38YRS... 350 over 30, 350 Turbo, 3:73 Posi P/S, P/B Black with red and black int. ''LOVE THESE OLD ''TRUCKS....... |
04-17-2007, 04:01 PM | #8 |
Junior Member
Join Date: Mar 2007
Location: New Jersey
Posts: 26
|
Re: Entire 71 C10 Project Must Go. NW Jersey
Thanks Weasel - I think its just a matter of time and someone having the cash and being close to my area to see this and pick it up. I really feel it is a steal at this price. I would pay $2200 for the truck alone. I will keep it up on the board a little while longer, then it has to go on Ebay (cringe)...Selling cars/trucks on Ebay is a major pain in the a**.
__________________
71 C-10 85ft bed 20,000BHP at wheels, runs on pump gas. "99% of being a Genius is just showin' up" -Einstien |
04-17-2007, 04:27 PM | #9 |
GEARHEAD
Join Date: Jan 2007
Location: CENTRAL,PA
Posts: 2,284
|
Re: Entire 71 C10 Project Must Go. NW Jersey
bump. Jon from tri-pro is looking for a truck. Just putting to the top for him to find it.
__________________
72 SWB 2WD MY PROJECT 72 LWB 4X4 FUTURE PROJECT SUBSCRIBE HEREBOARD VENDORS HERE NORWOOD MEET SURVIVOR! Last edited by RACINJASON22; 04-17-2007 at 04:27 PM. |
04-17-2007, 05:42 PM | #10 |
Registered User
Join Date: Jan 2004
Location: Coweta, Oklahoma
Posts: 2,389
|
Re: Entire 71 C10 Project Must Go. NW Jersey
Shane,
Your link to your pics was not working, so I fixed it for ya. TTT for one sweet looking truck! |
04-18-2007, 09:25 AM | #11 |
Junior Member
Join Date: Mar 2007
Location: New Jersey
Posts: 26
|
Re: Entire 71 C10 Project Must Go. NW Jersey
Thanks Smirch,
I had changed the page title and didnt think to change the link here on the board. Much appreciated! Shane NW Jersey
__________________
71 C-10 85ft bed 20,000BHP at wheels, runs on pump gas. "99% of being a Genius is just showin' up" -Einstien |
04-19-2007, 08:46 AM | #12 |
Junior Member
Join Date: Mar 2007
Location: New Jersey
Posts: 26
|
Reduced!!!!!: Entire 71 C10 Project Must Go. NW Jersey
OK Guys - in a last ditch effort to keep this off EBay, any supporting board member can have this for $2000 cash in hand! This is a steal. This deal is good for the next 48 hours. After that it goes out on EBay. I think most veteran board members will tell you this is a great deal for a super nice truck with many high quality parts and upgrades including the GMPP ZZ4 SBC block worth $500 alone. I ensure your satisfaction, If you come out and items are not as described, you walk away, no obligation or hard feelings.
Come take this truck, parts and the clear title home. Remember, this truck drives perfect. All project parts are hard-to-find highest quality..... Please jump on this while you can. I need to buy an enclosed trailer for traveling to all the go-kart races. Kids are getting impatient! Shane NW Jersey
__________________
71 C-10 85ft bed 20,000BHP at wheels, runs on pump gas. "99% of being a Genius is just showin' up" -Einstien Last edited by logansrun2005; 04-19-2007 at 03:08 PM. |
04-19-2007, 03:09 PM | #13 |
Junior Member
Join Date: Mar 2007
Location: New Jersey
Posts: 26
|
Re: Entire 71 C10 Project Must Go. NW Jersey
Ttt
__________________
71 C-10 85ft bed 20,000BHP at wheels, runs on pump gas. "99% of being a Genius is just showin' up" -Einstien |
04-19-2007, 11:29 PM | #14 |
Junior Member
Join Date: Mar 2007
Location: New Jersey
Posts: 26
|
Re: Entire 71 C10 Project Must Go. NW Jersey
OK, This is now on ebay item #280106888743
Supporing board members PM me for special price. Shane NW Jersey
__________________
71 C-10 85ft bed 20,000BHP at wheels, runs on pump gas. "99% of being a Genius is just showin' up" -Einstien |
04-23-2007, 10:46 AM | #15 |
Junior Member
Join Date: Mar 2007
Location: New Jersey
Posts: 26
|
Re: Entire 71 C10 Project Must Go. NW Jersey
ttt
__________________
71 C-10 85ft bed 20,000BHP at wheels, runs on pump gas. "99% of being a Genius is just showin' up" -Einstien |
04-23-2007, 03:07 PM | #16 |
Junior Member
Join Date: Mar 2007
Location: New Jersey
Posts: 26
|
Re: Entire 71 C10 Project Must Go. NW Jersey
Sold!!
__________________
71 C-10 85ft bed 20,000BHP at wheels, runs on pump gas. "99% of being a Genius is just showin' up" -Einstien |
04-23-2007, 03:54 PM | #17 |
Registered User
Join Date: Jul 2006
Location: Central PA
Posts: 12,201
|
Re: Entire 71 C10 Project Must Go. NW Jersey
did you make out ok? Ebay is banned at work now
__________________
The Garage: 1968 K-10 SWB - "Project Money Pit" 1996 Z-71 - "huntin rig" 1969 C-10 LWB (SOLD) "Project flip that truck or else" 1993 Passport, F@rd 1-ton (SOLD)"Project Cousin Eddie" My Garage Build "The 1,000 footer" |
Bookmarks |
|
|