Harmonic Balancer Puller & Installer Set - The 1947 - Present Chevrolet & GMC Truck Message Board Network

OhNoJoe · 05-14-2007, 01:54 PM

I pulled my 292. Now it's time to strip the tin. I have a pully puller that hooks around and pulls on the sides. I heard that I shouldn't use this type but rather it is better to use a puller that treads into the HB itself. Like this one.

http://www.mytoolstore.com/wilmar/wtech06.html

Harmonic Balancer Puller & Installer Set
W89711 $73.75

For removal and installation of harmonic balancers on most automotive and light truck applications
Master set: includes necessary bolts and adapters for most applications
Bilingual instructions
Replacement Part Availability

However it is a little high priced. The one at Sears (sold out) is like 25-30 bucks, Do I get a 50 buck advantage but getting the one listed above?

nvrforgotten52 · 05-14-2007, 02:01 PM

autozone will let you borrow one...

cdowns · 05-14-2007, 02:20 PM

that's about the same one i have a quality tool in my opinion is well worth the money// as far as the free tool programs at the chain stores if you add the time and expence running to pickup and dropoff as well as the fact that if you have an immediate need for one sometime at midnight well you're not saving a thing over the 30+year lifespan of the tool

OhNoJoe · 05-14-2007, 11:40 PM

After reading the posts about the problems folks can run into hammering on the HB I'm thinking it's worth the $. Hopefully, I'll still be goofing around with this stuff in 30 years or when I'm 80

05-14-2007, 01:54 PM	#1
OhNoJoe Registered User Join Date: May 2006 Location: Springfield Illinois Posts: 182	Harmonic Balancer Puller & Installer Set I pulled my 292. Now it's time to strip the tin. I have a pully puller that hooks around and pulls on the sides. I heard that I shouldn't use this type but rather it is better to use a puller that treads into the HB itself. Like this one. http://www.mytoolstore.com/wilmar/wtech06.html Harmonic Balancer Puller & Installer Set W89711 $73.75 For removal and installation of harmonic balancers on most automotive and light truck applications Master set: includes necessary bolts and adapters for most applications Bilingual instructions Replacement Part Availability However it is a little high priced. The one at Sears (sold out) is like 25-30 bucks, Do I get a 50 buck advantage but getting the one listed above?

05-14-2007, 02:01 PM	#2
nvrforgotten52 Registered User Join Date: Jan 2006 Location: Morro Bay C.A Posts: 179	Re: Harmonic Balancer Puller & Installer Set autozone will let you borrow one... __________________ '69 C10 SWB 350 edelbrock int/carb .420 .442 cam 700r4 70 lwb c10 work truck 250 I6 with two inch lift springs and a two inch bodylift and 33/12.5s

05-14-2007, 02:20 PM	#3
cdowns Senior Member Join Date: Jan 2003 Location: daytonabeach Posts: 22,956	Re: Harmonic Balancer Puller & Installer Set that's about the same one i have a quality tool in my opinion is well worth the money// as far as the free tool programs at the chain stores if you add the time and expence running to pickup and dropoff as well as the fact that if you have an immediate need for one sometime at midnight well you're not saving a thing over the 30+year lifespan of the tool __________________ 71c-10 350/2004r/4:11 lowered3/4 longbed/dead by hurricane MEANING OF DEATH::::: SOMEBODY ELSE GETS YOUR STUFF DONT BELIEVE EVERYTHING YOU THINK TAKE MY ADVISE;I DON'T USE IT ANYWAY

05-14-2007, 11:40 PM	#4
OhNoJoe Registered User Join Date: May 2006 Location: Springfield Illinois Posts: 182	Re: Harmonic Balancer Puller & Installer Set After reading the posts about the problems folks can run into hammering on the HB I'm thinking it's worth the $. Hopefully, I'll still be goofing around with this stuff in 30 years or when I'm 80



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.