205/ turbo 350 adapter F/S AZ

[t korinek]

This is for the original adapter that mates a 205 to a turbo 350, it came out of a shortbed 71 4x4 $100 + shipping Tom 480-241-1318

[72ironmike]

Will it fit in a Priority Mail Flat Rate Box? I am interested.

[t korinek]

Mike,I could probably make it fit, I wont be able to check for sure till tuesday. Tom

[toomanytoyz]

Have u sold it?

Thanks, Rick

[t korinek]

Still for sale, I never did check to see if it would fit in a priority envelope. Tom

[72ironmike]

Tom, Is that the only piece needed to be able to bolt a 350 automatic to my NP205 Transfer Case that currently has a three speed manual tran? If so, just get a price on "Parcel Post" . I'll get you paid.

[CUSTOM/10]

72ironmike

You would also have to change the input shaft on the t-case, or get a 205 that was behind a th350. ( The spline count is different from auto to standard )

Gary

[mrein3]

Originally Posted by CUSTOM/10

72ironmike

You would also have to change the input shaft on the t-case, or get a 205 that was behind a th350. ( The spline count is different from auto to standard )

Gary

True. But if you are wanting an auto instead of that stick, I'd start with this piece. You can buy these new from GM but they are over $200 and MOST used ones are cracked.

The way to do that swap is get this piece then look for a NP205 that originally came behind a th350. The th350 is also different from a 2wd th350. It will have no "tail" and a shorter output shaft.

100 bucks is a good deal for one of these.

[mrein3]

Oh and don't faint at the shipping cost. That is one heavy little piece of cast iron.

[6T8]

Tom, sent you a pm......Rick

[72ironmike]

Tom, I will have to pass on the adapter. I already have a th350/205 setup to put in my truck. I was trying to make a spare with the 3sp/205 that is in the truck now. Thanks.