Installed the disk brake front end - The 1947 - Present Chevrolet & GMC Truck Message Board Network

**Classic Heartbeat** · 09-13-2002, 10:49 PM

Well I got the disk brake front end installed in the 67 C/20 along with the power brake set up, automatic transmission steering column, and automatic crossmember. Getting closer!! WES www.ClassicHeartbeat.com

**Classic Heartbeat** · 09-13-2002, 10:51 PM

Second shot. I didn't paint it just cleaned it up because I am using the truck for an arround the yard truck. WES www.ClassicHeartbeat.com

jay-dawg · 09-14-2002, 04:36 AM

did you take the setup out of a another truck or did you go with an aftermarket setup? (you said it was for around the yard so I figure from another truck) from what year did you get?

jay

*Fast68Chevy* · 09-14-2002, 01:59 PM

judging fromt he p/s pump Wes got the parts off a 71 or 72

73-up also works as far as engine cradle and suspension and brakes

good luck

RON WOODGEARD · 09-14-2002, 06:52 PM

GREAT progress WES....

I still haven't driven mine with the disc conversion.. You'll probably beat me!!!!!!

RON

jostrans68 · 09-14-2002, 06:58 PM

Saw Wes's today looking good going to be a nice driver,,,

*racedvl* · 09-14-2002, 09:43 PM

Looking good!!! I wanna do that to my 69 someday!!

**Classic Heartbeat** · 09-15-2002, 02:17 AM

The front crossmember came out of a 72 BB GMC along with the power brake system. The power steering system came out of a 72 Cheyenne Super... Both trucks were rusted beond repair..... I am now going to exchange the 4.10 rear out of the truck for a 3.54 possi I have... I can't wait untill it's ready to drive again!! When I install the engine I will be installing a T-350 also.... It should make a good driver then.... WES www.ClassicHeartbeat.com

*racedvl* · 09-15-2002, 08:38 AM

WES, your putting in a smal block right? Did ya swap out them BB front springs? That's the only red flag that is popping up in my head.

09-13-2002, 10:49 PM	#1
Classic Heartbeat Project Junkie! Fishing Poor!! Join Date: Dec 1999 Location: Olympia,Wa. 98512 Posts: 10,766	Installed the disk brake front end Well I got the disk brake front end installed in the 67 C/20 along with the power brake set up, automatic transmission steering column, and automatic crossmember. Getting closer!! WES www.ClassicHeartbeat.com __________________ On-line catolog Classic Heartbeat Pickup Parts WEHEPP@comcast.net Call us Toll Free (888) 338-2502 Like Us on Facebook No appointment necessary. 72 BB Chevy Custom Deluxe / Custom Camper 67 I-6 (Soon to be 5.7 LS1) Panel 68 BB Chevy Short Bed 72 6.0 LQ9 Short Bed Chevy 4X4 Olympia's fastest growing truck parts supplier. Olympia's home for Wayward Chevys Last edited by Classic Heartbeat; 10-04-2007 at 06:40 PM.

09-13-2002, 10:51 PM	#2
Classic Heartbeat Project Junkie! Fishing Poor!! Join Date: Dec 1999 Location: Olympia,Wa. 98512 Posts: 10,766	Second shot. I didn't paint it just cleaned it up because I am using the truck for an arround the yard truck. WES www.ClassicHeartbeat.com __________________ On-line catolog Classic Heartbeat Pickup Parts WEHEPP@comcast.net Call us Toll Free (888) 338-2502 Like Us on Facebook No appointment necessary. 72 BB Chevy Custom Deluxe / Custom Camper 67 I-6 (Soon to be 5.7 LS1) Panel 68 BB Chevy Short Bed 72 6.0 LQ9 Short Bed Chevy 4X4 Olympia's fastest growing truck parts supplier. Olympia's home for Wayward Chevys Last edited by Classic Heartbeat; 10-04-2007 at 06:40 PM.

09-14-2002, 04:36 AM	#3
jay-dawg chevelito Join Date: Jun 2001 Location: Honolulu, HI USA Posts: 1,609	did you take the setup out of a another truck or did you go with an aftermarket setup? (you said it was for around the yard so I figure from another truck) from what year did you get? jay __________________ New deadline...when my son can drive. Aloha from Honolulu, HI

09-14-2002, 06:58 PM	#6
jostrans68 Jostrans68 Join Date: Mar 2001 Location: Bloomington indiana Posts: 1,182	Saw Wes's today looking good going to be a nice driver,,, __________________ [CGTW Member former 67-72 now with a 96 silverado

09-15-2002, 02:17 AM	#8
Classic Heartbeat Project Junkie! Fishing Poor!! Join Date: Dec 1999 Location: Olympia,Wa. 98512 Posts: 10,766	The front crossmember came out of a 72 BB GMC along with the power brake system. The power steering system came out of a 72 Cheyenne Super... Both trucks were rusted beond repair..... I am now going to exchange the 4.10 rear out of the truck for a 3.54 possi I have... I can't wait untill it's ready to drive again!! When I install the engine I will be installing a T-350 also.... It should make a good driver then.... WES www.ClassicHeartbeat.com __________________ On-line catolog Classic Heartbeat Pickup Parts WEHEPP@comcast.net Call us Toll Free (888) 338-2502 Like Us on Facebook No appointment necessary. 72 BB Chevy Custom Deluxe / Custom Camper 67 I-6 (Soon to be 5.7 LS1) Panel 68 BB Chevy Short Bed 72 6.0 LQ9 Short Bed Chevy 4X4 Olympia's fastest growing truck parts supplier. Olympia's home for Wayward Chevys

09-14-2002, 01:59 PM	#4
Fast68Chevy Account Suspended Join Date: May 2000 Location: IL Posts: 0	judging fromt he p/s pump Wes got the parts off a 71 or 72 73-up also works as far as engine cradle and suspension and brakes good luck

09-14-2002, 06:52 PM	#5
RON WOODGEARD Resident Young Old Dude ! Join Date: Jul 2001 Location: Nevada Posts: 1,948	GREAT progress WES.... I still haven't driven mine with the disc conversion.. You'll probably beat me!!!!!! RON

09-14-2002, 09:43 PM	#7
racedvl Account Suspended Join Date: Jan 2000 Location: Woodstock, IL Posts: 7,020	Looking good!!! I wanna do that to my 69 someday!!

09-15-2002, 08:38 AM	#9
racedvl Account Suspended Join Date: Jan 2000 Location: Woodstock, IL Posts: 7,020	WES, your putting in a smal block right? Did ya swap out them BB front springs? That's the only red flag that is popping up in my head.



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.