anyone got? - The 1947 - Present Chevrolet & GMC Truck Message Board Network

1970bowtie · 05-30-2007, 10:40 PM

yeah... i know its pointless. But, dose anyone have a short wide bed that they would be interested in selling.
Or tradeing for 2 short step beds(my preference but

)
For those of you who don't know,im poor,so the cheaper the better

1970bowtie · 05-30-2007, 11:16 PM

i appreciate free bumps!

superchevy · 05-30-2007, 11:21 PM

I'm located in Austin, so pretty close. You said for sale, right?
I'm about to sell a ton of parts from my shortbed project (getting out).
I have a super nice steel floor, '68 short fleet bed. I had a professional bodyman/fabricator widen the stock wheel tubs and floor 4" so you can run wider tires (looks factory..really nice job).
He also installed a new Mar-K front bed panel, as the old one was dented, and shaved/filled the stake pocket holes, and sidemarker light holes. The bedsides were near perfect, but he fixed a few small dings, then really slicked them down by priming and blocking it 4 times.
I need $1100 for it, and that includes a steel roll pan that has yet to be installed. Save yourself a bunch of time and money...just paint and you're ready to go.
Casey
email me at carpediem_00@yahoo.com

1970bowtie · 05-30-2007, 11:57 PM

thats kind of expensive for me, but it is a good deal. i just dont have the cash to pony up lol.
i see you have a 72 sprint.we have one also, its a small block sp. one of 258 or something like that

faribran · 05-31-2007, 10:11 AM

sure wish i lived closer to Austin...... sounds like a deal to me.

02_GMC_97_FIII · 05-31-2007, 12:44 PM

Sounds like a good deal, looking for a stepside myself. (to swap out the fleet) Too far though

Free Bump!

1970bowtie · 05-31-2007, 01:55 PM

Quote:

Originally Posted by 02_GMC_97_FIII

Sounds like a good deal, looking for a stepside myself. (to swap out the fleet) Too far though

Free Bump!

thats just what im looking for....to bad im not rich, id get them shipped lol.

1970bowtie · 06-01-2007, 01:01 AM

ttt

Spray-Bomb · 06-02-2007, 01:29 AM

Same here buddy

well heres a bump for ya

05-30-2007, 10:40 PM	#1
1970bowtie Senior Member Join Date: Apr 2007 Location: East Texas Posts: 549	anyone got? yeah... i know its pointless. But, dose anyone have a short wide bed that they would be interested in selling. Or tradeing for 2 short step beds(my preference but) For those of you who don't know,im poor,so the cheaper the better __________________ Justin 1970 c/10 short wide bed My build thread WTT 1970 chevy front end for 67/68 chevy front end WTT 2 15x10 american racing outlaw 2 wheels for 2 of the same in a 15x7 or 15x8 Last edited by 1970bowtie; 05-31-2007 at 12:00 AM.

05-30-2007, 11:16 PM	#2
1970bowtie Senior Member Join Date: Apr 2007 Location: East Texas Posts: 549	Re: anyone got? i appreciate free bumps! __________________ Justin 1970 c/10 short wide bed My build thread WTT 1970 chevy front end for 67/68 chevy front end WTT 2 15x10 american racing outlaw 2 wheels for 2 of the same in a 15x7 or 15x8

05-30-2007, 11:21 PM	#3
superchevy Got big-block? Join Date: Jul 2000 Location: Austin, Texas Posts: 2,453	Re: anyone got? I'm located in Austin, so pretty close. You said for sale, right? I'm about to sell a ton of parts from my shortbed project (getting out). I have a super nice steel floor, '68 short fleet bed. I had a professional bodyman/fabricator widen the stock wheel tubs and floor 4" so you can run wider tires (looks factory..really nice job). He also installed a new Mar-K front bed panel, as the old one was dented, and shaved/filled the stake pocket holes, and sidemarker light holes. The bedsides were near perfect, but he fixed a few small dings, then really slicked them down by priming and blocking it 4 times. I need $1100 for it, and that includes a steel roll pan that has yet to be installed. Save yourself a bunch of time and money...just paint and you're ready to go. Casey email me at carpediem_00@yahoo.com __________________ '68 CST SWB factory 396/T400 buddy buckets, a/c, ps, pb '72 Corvette convertible 454/4spd/ac, ps, pb '73 GMC Sierra Grande short wide 454/T400 ps, pb, ac '77 K5 Blazer black on red, 350/T350/NP205 ps, pb, ac all original '78 GMC Sierra Classic short wide 454/T400 ps, pb, ac '72 GMC Sprint SP454. 1 of 38 built. '73 GMC Sprint SP454. 1 of 71 built. '75 GMC Sprint SP454. 1 of 25 built. SOLD! '72 GMC K25 4x4 468/4L80e/NP205 build thread http://67-72chevytrucks.com/vboard/s...23#post4324423 SOLD!'55 Chevy gasser 496/4spd build thread http://67-72chevytrucks.com/vboard/s...96#post4324396

05-30-2007, 11:57 PM	#4
1970bowtie Senior Member Join Date: Apr 2007 Location: East Texas Posts: 549	Re: anyone got? thats kind of expensive for me, but it is a good deal. i just dont have the cash to pony up lol. i see you have a 72 sprint.we have one also, its a small block sp. one of 258 or something like that __________________ Justin 1970 c/10 short wide bed My build thread WTT 1970 chevy front end for 67/68 chevy front end WTT 2 15x10 american racing outlaw 2 wheels for 2 of the same in a 15x7 or 15x8

05-31-2007, 10:11 AM	#5
faribran Registered User Join Date: Jul 2005 Location: AL Posts: 1,828	Re: anyone got? sure wish i lived closer to Austin...... sounds like a deal to me. __________________ "

05-31-2007, 12:44 PM	#6
02_GMC_97_FIII Registered User Join Date: Dec 2004 Location: Mequon, WI Posts: 186	Re: anyone got? Sounds like a good deal, looking for a stepside myself. (to swap out the fleet) Too far though Free Bump! __________________ '72 Chevy C10 Shortbox, 350/TH350 '08 Chevy Trailblazer SS 6.0L AWD 400HP

06-01-2007, 01:01 AM	#8
1970bowtie Senior Member Join Date: Apr 2007 Location: East Texas Posts: 549	Re: anyone got? ttt __________________ Justin 1970 c/10 short wide bed My build thread WTT 1970 chevy front end for 67/68 chevy front end WTT 2 15x10 american racing outlaw 2 wheels for 2 of the same in a 15x7 or 15x8

06-02-2007, 01:29 AM	#9
Spray-Bomb Texas Big Wig Join Date: Jan 2007 Location: Mineola, Texas Posts: 5,620	Re: anyone got? Same here buddy well heres a bump for ya __________________ Just not low enough... ----------------------------- Sinister Killer



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.