4x4 6cly air cleaner set up f/s - The 1947 - Present Chevrolet & GMC Truck Message Board Network

**6t727t2** · 06-02-2007, 04:47 PM

Very nice original off-set air cleaner set up removed from a 1970 blazer 6 cyl.4x4. Complete as shown with brackets, etc. Dirty but solid with no rot.
$75 shipped.

Luvlegs · 06-02-2007, 05:24 PM

Would you want to do a package deal including the power steering pump and bracket too?

**6t727t2** · 06-02-2007, 06:23 PM

Sure, that's what's coming off next. $100 + exact shipping cost for all.

**PICKMUP** · 06-02-2007, 06:44 PM

Put me second in line for the package...

**too much stuff** · 06-02-2007, 07:24 PM

This is Sakohntr from the board. Would you sell me just the double groove pulley from the alternator? And those are damn good prices on your parts!

qksilver · 06-02-2007, 10:04 PM

Put me in line also, would need the air cleaner set up, P/S pump, brackets and the double pulley for the alt, plus if it is a 292 I need the engine brackets from the crossmember and the mounts and bolts. The only thing missing to reinstall a facotry 292 back into my K-10 swb. I won't be home untill late tomorrow or Monday night. Picking up some parts in NJ.
Pm me if it gets to me thanks,
Steve

Luvlegs · 06-03-2007, 06:54 AM

I will take it - The air cleaner set up and the power steering set up - that's 100 plus shipping for all of it correct? Sending you a pm.

orange-orange · 06-04-2007, 08:36 AM

Any chance the air cleaner is still available.Thanks Randy

**N2TRUX** · 06-04-2007, 12:13 PM

Try send 6t727t2 a private message. He is usually pretty good about responding.

N2GMTrux · 06-05-2007, 08:27 PM

Put me in-line for:

That engine appears to be a 250 in-line,,,, I am interseted in the engine block mounts, rubber cushion motor mounts and engine frame mounts,,,,,,,,,,,,,, "Entire engine mounting setup"

Shipping cost to, Ft. Worth TX 76133

06-02-2007, 04:47 PM	#1
6t727t2 Active Member Join Date: Dec 2004 Location: NJ Posts: 6,455	4x4 6cly air cleaner set up f/s Very nice original off-set air cleaner set up removed from a 1970 blazer 6 cyl.4x4. Complete as shown with brackets, etc. Dirty but solid with no rot. $75 shipped. Attached Images

06-02-2007, 05:24 PM	#2
Luvlegs Registered User Join Date: Sep 2005 Location: Smith Mountain Lake Virginia Posts: 1,537	Re: 4x4 6cly air cleaner set up f/s Would you want to do a package deal including the power steering pump and bracket too? __________________ "A cat will almost always blink when hit between the eyes with a ball peen hammer" (you don't always have to state the obvious) Wear your PPE! You can eat with false teeth but you can't see with a false eye. 1959 Studebaker Silverhawk 350/400 1972 C10 L6 3OTT 2005 F350 - Built - whew!

06-02-2007, 06:23 PM	#3
6t727t2 Active Member Join Date: Dec 2004 Location: NJ Posts: 6,455	Re: 4x4 6cly air cleaner set up f/s Sure, that's what's coming off next. $100 + exact shipping cost for all. Attached Images

06-02-2007, 06:44 PM	#4
PICKMUP "Trucks with Class" Join Date: Jul 2000 Location: OLYMPIA, WA, USA Posts: 8,158	Re: 4x4 6cly air cleaner set up f/s Put me second in line for the package...

06-02-2007, 07:24 PM	#5
too much stuff Roadtrip! Join Date: Feb 2003 Location: Grand Rapids MN Posts: 13,787	Re: 4x4 6cly air cleaner set up f/s This is Sakohntr from the board. Would you sell me just the double groove pulley from the alternator? And those are damn good prices on your parts! __________________ 67 gmc custom lwb dakota truck. Sold...And bought back 69 swb 4x4 project (in progress) 70 c-10 lwb texas truck 70 4x4/BB/bkts/posi/tach(retired) 70 swb (wifes) 70 jimmy camper 71 K-5 factory 2wd 71 cheyenne 4x4/tach/posi/ plow rig 71 Cheyenne20 BB, buckets, tach, tilt, 4 speed 72 jimmy CST wyoming rig 72 jimmy Colorado rig 72 lifted texas 4x4 3/4 ton burb 65 fury conv. 383/auto 65 chrysler 300 "L" 413 auto

06-02-2007, 10:04 PM	#6
qksilver Senior Member Join Date: Dec 2004 Location: Southern Pines NC Posts: 3,853	Re: 4x4 6cly air cleaner set up f/s Put me in line also, would need the air cleaner set up, P/S pump, brackets and the double pulley for the alt, plus if it is a 292 I need the engine brackets from the crossmember and the mounts and bolts. The only thing missing to reinstall a facotry 292 back into my K-10 swb. I won't be home untill late tomorrow or Monday night. Picking up some parts in NJ. Pm me if it gets to me thanks, Steve

06-03-2007, 06:54 AM	#7
Luvlegs Registered User Join Date: Sep 2005 Location: Smith Mountain Lake Virginia Posts: 1,537	Re: 4x4 6cly air cleaner set up f/s I will take it - The air cleaner set up and the power steering set up - that's 100 plus shipping for all of it correct? Sending you a pm. __________________ "A cat will almost always blink when hit between the eyes with a ball peen hammer" (you don't always have to state the obvious) Wear your PPE! You can eat with false teeth but you can't see with a false eye. 1959 Studebaker Silverhawk 350/400 1972 C10 L6 3OTT 2005 F350 - Built - whew!

06-04-2007, 08:36 AM	#8
orange-orange Registered User Join Date: Oct 2006 Location: atlanta Posts: 63	Re: 4x4 6cly air cleaner set up f/s Any chance the air cleaner is still available.Thanks Randy

06-04-2007, 12:13 PM	#9
N2TRUX Happy to be here Join Date: Mar 2000 Location: Cypress, TX Posts: 39,021	Re: 4x4 6cly air cleaner set up f/s Try send 6t727t2 a private message. He is usually pretty good about responding. __________________ Follow me on Facebook and Instagram @N2trux.com Articles- "Jake" the 84 to 74 crewcab "Elwood" the77_Remix 85 GMC Sierra "Scarlett" "Refining Sierra"

06-05-2007, 08:27 PM	#10
N2GMTrux Registered User Join Date: Jan 2007 Location: Fort Worth, TX 76133 Posts: 406	Re: 4x4 6cly air cleaner set up f/s Put me in-line for: That engine appears to be a 250 in-line,,,, I am interseted in the engine block mounts, rubber cushion motor mounts and engine frame mounts,,,,,,,,,,,,,, "Entire engine mounting setup" Shipping cost to, Ft. Worth TX 76133 __________________ ...try'n to be a little! This is a great site. http://67-72chevytrucks.com/vboard/s...d.php?t=157669 http://www.67-72chevytrucks.com/vboa...d.php?t=375640



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.