Holley 4010 and performer intake? - The 1947 - Present Chevrolet & GMC Truck Message Board Network

KAILUAZ · 06-12-2007, 11:01 AM

Im looking at a used Holley 4010 (R84010) with Edelbrock performer intake for $75.00. The carb has been sitting for a year. Its for my 70 SBC.
Any thoughts, is this a decent combo? Thanks.

jhow66 · 06-12-2007, 11:09 AM

Deal (if for maniflod only). 4010 carb is the new type carb (like a Eldebrock with one piece top)that Holley tried for a few years -do not make it now I believe. Used one on a 454 I build for a street rodder- worked fine.

KAILUAZ · 06-12-2007, 11:21 AM

Cool, thanks for the help, much appreciated!

bryanw1968 · 06-12-2007, 11:43 AM

Quote:

Originally Posted by KAILUAZ

Cool, thanks for the help, much appreciated!

I heard they quit making them because they were difficult to tune. I also read that they are not a performance oriented carb.

KAILUAZ · 06-12-2007, 12:50 PM

At this point I just need it to get the truck running again, the Quad-ra-junk died.

Steelawork'n · 06-12-2007, 05:18 PM

Someone told me Hollies were hard to tune too, but that was from a guy who had never seen a vacuum guage.

jhow66 · 06-12-2007, 10:51 PM

You got a bargain in that deal.

GREASEMONKEY72 · 06-12-2007, 11:02 PM

sounds good to me

06-12-2007, 11:01 AM	#1
KAILUAZ King of Rust Join Date: Jul 2005 Location: St Petersburg, FL Posts: 359	Holley 4010 and performer intake? Im looking at a used Holley 4010 (R84010) with Edelbrock performer intake for $75.00. The carb has been sitting for a year. Its for my 70 SBC. Any thoughts, is this a decent combo? Thanks. __________________ 1970 GMC 2500, 350, TH400, front disks, thats it! My Pics

06-12-2007, 11:09 AM	#2
jhow66 Registered User Join Date: Jun 2002 Location: Knoxville Tenn. Posts: 3,058	Re: Holley 4010 and performer intake? Deal (if for maniflod only). 4010 carb is the new type carb (like a Eldebrock with one piece top)that Holley tried for a few years -do not make it now I believe. Used one on a 454 I build for a street rodder- worked fine. __________________ 56 Chevy Bel-Air 2dr. HT (purchased new) 71 Chevy Cheyenne SWB PU (502HO) 65 GMC short bed step--work in progress and my gofer

06-12-2007, 11:21 AM	#3
KAILUAZ King of Rust Join Date: Jul 2005 Location: St Petersburg, FL Posts: 359	Re: Holley 4010 and performer intake? Cool, thanks for the help, much appreciated! __________________ 1970 GMC 2500, 350, TH400, front disks, thats it! My Pics

06-12-2007, 12:50 PM	#5
KAILUAZ King of Rust Join Date: Jul 2005 Location: St Petersburg, FL Posts: 359	Re: Holley 4010 and performer intake? At this point I just need it to get the truck running again, the Quad-ra-junk died. __________________ 1970 GMC 2500, 350, TH400, front disks, thats it! My Pics Last edited by KAILUAZ; 06-12-2007 at 12:51 PM.

06-12-2007, 05:18 PM	#6
Steelawork'n Just hang'n around Join Date: Nov 2005 Location: Camano Island WA Posts: 248	Re: Holley 4010 and performer intake? Someone told me Hollies were hard to tune too, but that was from a guy who had never seen a vacuum guage. __________________ Driving a '68 Chevy C20 and a '93 Astro Van. Lots and lots of mileage that I deduct each year.

06-12-2007, 10:51 PM	#7
jhow66 Registered User Join Date: Jun 2002 Location: Knoxville Tenn. Posts: 3,058	Re: Holley 4010 and performer intake? You got a bargain in that deal. __________________ 56 Chevy Bel-Air 2dr. HT (purchased new) 71 Chevy Cheyenne SWB PU (502HO) 65 GMC short bed step--work in progress and my gofer

06-12-2007, 11:02 PM	#8
GREASEMONKEY72 Registered User Join Date: Aug 2006 Location: Bakersfield,CA Posts: 7,893	Re: Holley 4010 and performer intake? sounds good to me __________________ -steven Alte Seele S.S. "Allison" '72 C/10 LWB 350SB/TH350 - DD PITBULL IS NOT A CRIME



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.