![]() |
Register or Log In To remove these advertisements. |
|
|
![]() |
|
Thread Tools | Display Modes |
|
![]() |
#1 |
Happy to be here
![]() Join Date: Mar 2000
Location: Cypress, TX
Posts: 39,023
|
What did you get done? 06/17
What did you get done?
__________________
Follow me on Facebook and Instagram @N2trux.com Articles- "Jake" the 84 to 74 crewcab "Elwood" the77_Remix 85 GMC Sierra "Scarlett" "Refining Sierra" |
![]() |
![]() |
![]() |
#2 |
Registered User
Join Date: Feb 2007
Location: Austin, TX
Posts: 3,930
|
Re: What did you get done? 06/17
Swapped the 3.42 open rear for my 3.08 Posi rear. Not quite the blast that the 3.42's were but at least it hooks up now. The 3.08 rear has completely rebuilt brakes which also fueled the decision. 3.42's will go in the 3.08 posi housing when I get a 700R4.
Removed 4 leafs from each of the rear springs. I got a pretty decent drop in the rear and it rides much smoother. I need to decide how to lower the front though because it still has the HD coils up front and the front is sitting higher than the rear. Swapped a balanced 1 piece drive shaft for the 2 piece it had. The 1 piece was rebuilt with new U joints while the stock 2 piece had a mile of slack in it. Removing the carrier bearing mounting bracket was the toughest part. I'll post some pics later. |
![]() |
![]() |
![]() |
#3 |
Village Idiot....
Join Date: Jul 2003
Location: Rowlett, Texas
Posts: 1,833
|
Re: What did you get done? 06/17
Nothing truck related but I did get a project off my list.
After 10 years, moving twice and a shop fire I finally got my aluminum stool back together. I had parts spread across the shop, my house and my dad’s shop. It was owned by a painter friend of mine so it had several coats on it before I got it. I had wild dreams of polishing it but after working on it for awhile (hence the 10 years) I decided to just brush it and polish all the hardware. Last edited by n2billet; 08-28-2009 at 05:55 AM. |
![]() |
![]() |
![]() |
#4 |
yeller
Join Date: Oct 2001
Location: Twin Cities
Posts: 13,826
|
Re: What did you get done? 06/17
The most importnt thing I got done (if you can call it that), was finding out that my wife and I will be bringing a baby girl into the world in about 4 months...I am soo excited I can't quit talking about it.
![]() Besides that, I started tearing down the 'burb, it needs new head gaskets. I will also the valve seals replaced while the heads are off. I can't believe what a PITA it is to strip off the top end on this '90...lots of stuff in the way.
__________________
Jeff 73-87.com 73-87.com Facebook page 73-87 cab corner 6x9 speaker brackets for sale 67-72 cab corner speaker brackets for sale 47-54 cab corner speaker brackets for sale |
![]() |
![]() |
![]() |
#5 |
Registered User
Join Date: Feb 2007
Location: Arizona
Posts: 213
|
Re: What did you get done? 06/17
my welder came in on thursday, set it all up and did some practice. didn't notice that i didn't tighten the hoses down and i leaked the entire tank before i could finish shaving one turn signal
![]() ![]() |
![]() |
![]() |
![]() |
#6 |
Registered User
Join Date: Apr 2001
Location: DALLAS,TX
Posts: 21,964
|
Re: What did you get done? 06/17
I replaced some mild steel hardware on the 68 w/some stainless. I unloaded the steel-floor off of the rolling chassis that's on my car trailer. It was quite the task to get it down off of the truck & on to the ground w/o tearing a bunch of stuff up in between. I started cleaning it up (scrubbing the floor & hammer/dolleying some tweaked metal) so it can be mocked up in place on the 68 to determine where to remount the air stuff & the soon to be relocated battery.
Today I watched it rain & then went out to dinner w/my GF's parents for Fathers day.
__________________
67SWB-B.B.RetroRod 64SWB-Recycle 89CCDually-Driver/Tow Truck 99CCSWB Driver All Fleetsides @rattlecankustoms in IG Building a small, high rpm engine with the perfect bore, stroke and rod ratio is very impressive. It's like a highly skilled Morrocan sword fighter with a Damascus Steel Scimitar..... Cubic inches is like Indiana Jones with a cheap pistol. |
![]() |
![]() |
![]() |
#7 | |
Registered User
Join Date: Apr 2001
Location: DALLAS,TX
Posts: 21,964
|
Re: What did you get done? 06/17
Quote:
![]()
__________________
67SWB-B.B.RetroRod 64SWB-Recycle 89CCDually-Driver/Tow Truck 99CCSWB Driver All Fleetsides @rattlecankustoms in IG Building a small, high rpm engine with the perfect bore, stroke and rod ratio is very impressive. It's like a highly skilled Morrocan sword fighter with a Damascus Steel Scimitar..... Cubic inches is like Indiana Jones with a cheap pistol. |
|
![]() |
![]() |
![]() |
#8 |
glamoros piece o' lowlife
Join Date: Mar 2007
Location: Redford, MI
Posts: 1,164
|
Re: What did you get done? 06/17
I second that, it seems to me that the only thing to enter a guy's home better than a car/truck is a wife, and the only thing better than a wife is a kid
![]()
__________________
The more I drink, the more I drink, the more I drink... diesel, reg cab, long bed, 4 across the rear, single stack, wooden stakes, and lotsa lights - the Hay Express |
![]() |
![]() |
![]() |
#9 |
Registered User
Join Date: Jun 2007
Location: Hallstead, PA
Posts: 46
|
Re: What did you get done? 06/17
All I managed to get done yesterday was swap out all the old GM HEI stuff with new MSD High Output stuff. Cap, Rotor, and Module. What a difference.
|
![]() |
![]() |
![]() |
#10 |
yeller
Join Date: Oct 2001
Location: Twin Cities
Posts: 13,826
|
Re: What did you get done? 06/17
Thanks Scoti.
![]()
__________________
Jeff 73-87.com 73-87.com Facebook page 73-87 cab corner 6x9 speaker brackets for sale 67-72 cab corner speaker brackets for sale 47-54 cab corner speaker brackets for sale |
![]() |
![]() |
![]() |
#11 |
glamoros piece o' lowlife
Join Date: Mar 2007
Location: Redford, MI
Posts: 1,164
|
Re: What did you get done? 06/17
Saturday - went up to Grayling in the morning, talked to a fabricator about racing go-kart suspensions. Afternoon was spent tuning the Holley (swapping out power valves) and installing a support bracket for the heater core hoses, and the evening was a relaxed one in front of the TV.
Sunday - wake up at noon, watch "Firefox" on Spike, pick up a prospective student from the bus station, take said prospective student to the university's dorms, attend team meeting for senior project, go home, watch "Ice Road Truckers" on the History Channel, eat dinner, and I'm about to finish my take-home exam in Mechanical Vibrations.
__________________
The more I drink, the more I drink, the more I drink... diesel, reg cab, long bed, 4 across the rear, single stack, wooden stakes, and lotsa lights - the Hay Express |
![]() |
![]() |
![]() |
#12 |
Dark Heart Motorsports
Join Date: Apr 2007
Location: 29404 DKFX
Posts: 683
|
Re: What did you get done? 06/17
went out to aviation square. my truck caught the attention of an elderly gentleman out there just seein what us "kids" had... wanted to know if I wanted to sell my truck, it was blingin I was thrilled that out in all the rice, my CHEVY was gettin the attention
![]()
__________________
How Deep Can YOU Bleed..? 1985 Chevy Blazer K5- 6.2 N/A, 400 turbo trans CUCV, 12v converted... a new chapter 2005 GMC Sierra Crew Cab 6.0 powwwaa!!! custom jumpseat install w/ captain seats, Hypertech tuner, MSD Blaster Coils, CB and twin antenna's, all electric interior, touch screen in dash. custom center console, with jump seat replacing original console. 1500 HD! |
![]() |
![]() |
![]() |
#13 |
Junior Member
Join Date: May 2007
Location: Hampstead, NC
Posts: 313
|
Re: What did you get done? 06/17
i cut off my exhaust right after the y so its strait open right now and rediculously loud, took about an hour with a dull hack saw laying on my back in a gravel driveway in 92 degree tempature. also finally changed my oil, and its a good thing i did cuz there was only 3 quarts in there.
__________________
1979 K10 reg cab short bed 33x12.50s - GONE 1988 4x4 reg cab long bed 337k miles - GONE 1995 Z71 GU6 G80 F44 ext cab short bed 149k 305/70/16s - GONE 1995 NZZ GT4 2dr Tahoe 3" lift 14 bolt sf 155k 305/70/16s - GONE 1994 Z28 M6 1995 Z71 GT4 G80 ext cab short bed 215k GONE 1997 GT4 G80 Yukon 4 door leather, sunroof 168k miles GONE 2003 Avalanche Z71 GT4 G80 165k miles |
![]() |
![]() |
![]() |
#14 |
www.73-87chevytrucks.com
![]() Join Date: Dec 1999
Location: Birmingham, AL
Posts: 6,935
|
Re: What did you get done? 06/17
Friday morning I found a piece of concrete wedged in my rear quarter glass of the Suburban I have been dealing with. When and got a replacement for it before the company closed.
Saturday pulled the glass out and started to put the new on it only to discover that it had a bullseye in it. Yippie. No one had a replacement so I put the broken one back in. After that I found the last issue with the Burb not running, the magnetic pickup was TOAST. No one had the part to rebuilt the distributor, so I got a replacement. Once I got it in it ran great. I drove it to work today! Sunday spent time with Elizabeth since it was my first Fathers day and went to our parents houses. I have already said it to you before Jeff, but I will say it again. A HUGE congratulations to you! It will be your greatest addition!
__________________
Chris Lucas 1973 Chevy C-10 1978 GMC Jimmy (2WD) - SOLD 1987 R10 twin turbo LS 1991 R3500 SRW CrewCab 1985 K5 diesel swapped project 1989 K5 2WD conversion w/ Vette susp Project Captkaos Customs 73-87chevytrucks.com |
![]() |
![]() |
![]() |
#15 |
Chevys Kick A$$
Join Date: Jan 2005
Location: Zootown, MT
Posts: 12,699
|
Re: What did you get done? 06/17
I worked on the Camaro all weekend. I got the headlights fixed so they wont turn off when I am driving. Got the cd player from the cavy hooked up. Got the dash torn apart and got the dash lights working, got the horn disconnected so it will stop honking. Messed around with the semi-broke quadrajunk on there and got it running a little bit better. Got new 6x9s put in and got the headliner in the back to stop sagging after getting some different interior parts from the junkyard. Hung out with my dad and had dinner with him for fathers day.
__________________
*HOODS is what I answer too* -'79, '77, '88 Pickup Sold, '85 Camaro, '83 T/A, '81,'83,'90 K5 Blazer All Sold ![]() -'79 3/4 ton "Big Yellow Bananna" Lifted 4spd. 39.5 TSL Swampers, The money Pit ![]() ![]() -'86 K5 Blazer Silverado 6.2 4" lift 35"s -'95 Ext. Cab Shorty 4" Tuff Country rolling 35" M/T's -'83 Monte Carlo T-Tops. 126,500 Original Miles -LATER ![]() I would rather push a Chevy then drive a ford!!
![]() |
![]() |
![]() |
![]() |
#16 |
On a budget like Fred Sanford
Join Date: Oct 2005
Location: Topeka, KS
Posts: 2,031
|
Re: What did you get done? 06/17
Got the back end of the 383 buttoned up (flywheel, clutch, pressure plate & bellhousing). Should be dropping it in tomorrow!!
![]()
__________________
'85 Silverado swb: 383 stroker, 10.5:1, vortec heads, 232/238 roller cam, RPM air gap, performer 750 carb, stainless longtubes, 3" duals/super 44's, T56/4.11 383ci build / exterior refresh thread '98 Camaro z28: 370ci twin turbo 370ci build '01 Tahoe LT 4x4: 5.3, longtubes/ory, magnaflow duals, custom tune....wife's DD |
![]() |
![]() |
![]() |
#17 |
Windy Corner of a Dirty Street
Join Date: Jun 2003
Location: Pueblo West, Colorado
Posts: 2,926
|
Re: What did you get done? 06/17
Drug home a 1963 Corvair van. Not sure what the plan will lay a head for this oddity but it has been in the family since 1982, so I guess I can store it for a while until its future is determined.
__________________
Current vehicle collection: 1978 Chevrolet K10, 8.1L, NV4500, NP205 1989 Chevrolet Suburban, 8.1L, NV4500, NP241 1993 Chevrolet C1500 Sportside, TBI 7.4L, 4L60E 2001 Chevrolet K2500HD, Ext Cab, SWB, 8.1L, ZF 6 speed 2014 Chevrolet Impala LTZ 3.6L Vortec 8.1L because life is too short to tolerate underpowered vehicles
Last edited by DirtyLarry; 06-18-2007 at 09:19 PM. |
![]() |
![]() |
![]() |
#18 | |
Registered User
Join Date: Feb 2007
Location: Marana, Arizona
Posts: 3,416
|
Re: What did you get done? 06/17
Quote:
in back hooked up to a Corvette rear end that van could be an awesome sleeper !
__________________
"I feel the need for speed!"... as soon as I am done with my nap. |
|
![]() |
![]() |
![]() |
#19 |
Chris
Join Date: Nov 2004
Location: Monaville, WV
Posts: 3,737
|
Re: What did you get done? 06/17
Nothing really truck related for me.
Unless you count hauling all four atv wheels and tires down to the tire place to get new tires. That was all I done, took my atv wheels and tires off because on thrusday or so on a ride we noticed they were dry rotted and cracking badly. So I took them down, sprayed my atv off real good, washed it off really good for the first time in awhile LOL, got four new tires mounted and new valve stems, painted the wheels and put em back on. Then I washed it all off good when I got home, tire blacked the tires, armor-all'd the whole thing, mounted my bicycle drink holder on my radio box, then took it for a spin around the block all cleaned up. Sunday I took it out on the trails for about 33 miles worth of riding, wasn't too dirty but man it was covered in dust. I forgot to get pics with it cleaned up, have to wash it and get some with my new tires on it.
__________________
Chris GIT R DONE!!!!!! Check out all our rides, http://www.cardomain.com/id/benwa454 |
![]() |
![]() |
![]() |
#20 |
Registered User
Join Date: Jan 2003
Location: Austin, TX
Posts: 824
|
Re: What did you get done? 06/17
Finally got some pix of my new baby boy on the computer. He two weeks old now.
![]() |
![]() |
![]() |
![]() |
#21 |
www.73-87chevytrucks.com
![]() Join Date: Dec 1999
Location: Birmingham, AL
Posts: 6,935
|
Re: What did you get done? 06/17
Congrats Ric!
__________________
Chris Lucas 1973 Chevy C-10 1978 GMC Jimmy (2WD) - SOLD 1987 R10 twin turbo LS 1991 R3500 SRW CrewCab 1985 K5 diesel swapped project 1989 K5 2WD conversion w/ Vette susp Project Captkaos Customs 73-87chevytrucks.com Last edited by Captkaos; 06-19-2007 at 02:29 PM. |
![]() |
![]() |
![]() |
#22 |
Registered User
![]() Join Date: Jun 2007
Location: Springfield Mo.
Posts: 1,086
|
Re: What did you get done? 06/17
Hey Jeff congratulations on the new baby! ...Joe
|
![]() |
![]() |
![]() |
#23 |
Cruzzzn' Vet
Join Date: Jan 2005
Location: Porterville,Ca.
Posts: 1,918
|
Re: What did you get done? 06/17
Congrats Ric, you have been blessed with a Beautiful son, get those wrenches in his hands early
![]() ![]() ![]() John |
![]() |
![]() |
![]() |
#24 |
Registered User
Join Date: Jan 2003
Location: Austin, TX
Posts: 824
|
Re: What did you get done? 06/17
Thnx guys. For those that are interested, I have a few more pics in the GD forum.
http://www.67-72chevytrucks.com/vboa...d.php?t=245973 |
![]() |
![]() |
![]() |
#25 | |
It followed me home?
Join Date: Mar 2003
Location: Yup
Posts: 5,751
|
Re: What did you get done? 06/17
Quote:
__________________
Adam That's why they call it a shortcut Kyle, if it was easy it would just be the way. 86 c-10 SWB 85 CCSB 90 GMC K30 Crew SRW 1985 C30 Dually |
|
![]() |
![]() |
![]() |
Bookmarks |
|
|