|
|
|
09-18-2002, 09:35 AM
|
#1 |
|
Registered User
Join Date: Aug 2002
Location: Waxahachie TX
Posts: 773
|
spindle question
hey the truck i bought recently is a 68 but it has been converted to 5 lug disk in the front my prob is i dont know what the front end is from i heard there is a diffrence between the 71-72 and the 73-87 spindles is this right and how do i know what i have i want drop spindles and springs in the front but want to order the right ones any ideas or comments?
|
|
|
|
09-23-2002, 10:07 PM
|
#2 |
|
Registered User
Join Date: Aug 2002
Location: Waxahachie TX
Posts: 773
|
i found out this weekend i got all 72 stuff under the front i ordered 5 inch drop springs for the rear now just need some drop spindles was also wodering anyone ever cut just a bit out of a front coil i want 3.5 spindles and like 1 inch springs,ive cut some springs before but cut out one coil and it was like a 3 inch drop so i figure cut about a 1/4 out might be right any ideas or just breakdown and buy 1.5 inch drop spring?????????????
|
|
|
|
|
09-23-2002, 10:22 PM
|
#3 |
|
SLICER AND DICIER
Join Date: May 2001
Location: Quuen Creek
Posts: 1,383
|
Nobody makes bigger than a 3" drop spindle. Not that I'm aware of anyway. And yes buy the coils, it's not worth your saftey to cut them or heat them. Coils are CHEAP.
__________________
01 Tahoe 22's 2/4 drop and tv's  68 chevy money pit 51 chevy belair 95 Honda 900RR 05 GMC Siearra (company truck) |
|
|
|
|
09-26-2002, 01:24 PM
|
#4 |
|
Registered User
Join Date: Aug 2002
Location: Waxahachie TX
Posts: 773
|
will 73 and up spindles fir and work right for 71-72 front end?
|
|
|
|
|
09-26-2002, 02:31 PM
|
#5 |
|
SLICER AND DICIER
Join Date: May 2001
Location: Quuen Creek
Posts: 1,383
|
Yes they will work, but you have to change upper ball joints and outer tie rod ends to 73.
__________________
01 Tahoe 22's 2/4 drop and tv's 68 chevy money pit 51 chevy belair 95 Honda 900RR 05 GMC Siearra (company truck) |
|
|
|
 |
| Bookmarks |
|
|
Hybrid Mode
