Register or Log In To remove these advertisements. |
|
|
|
Thread Tools | Display Modes |
|
06-29-2007, 11:21 AM | #1 |
4 eyed fever
Join Date: Jul 2005
Location: Eureka, Nevada
Posts: 500
|
power steering help needed
We put a rebuilt ps pump in my son's truck. It worked all right for a short time, and has gradually gotten worse. Now it only works at hi rpm's. Someone told me you have to use parts off the old one?? Bolts or seals or something? Any insight....thanks, Al
__________________
1971 GMC 2500 4x4 1972 GMC Sierra Grande 1/2 t 4x4-#1 son's truck. Recently completed resto. 4 YO daughter," Daddy, I like your truck better than Mom's." (2000 F350-ranch truck) Smart kid!! |
06-29-2007, 01:01 PM | #2 |
Son of a gun
Join Date: Jan 2007
Location: Hot Springs, Arkansas
Posts: 1,636
|
Re: power steering help needed
The problem could be in the PS box. I would take the pump back for exchange, and if the new one works, then that was your problem. If the problem still exists with the new pump, look to change out your box. Is the belt slipping? Did you use all of the brackets from the donor truck? Does the pump look like it is mounted straight?
__________________
Bill BEATERS ARE NEATER Last edited by Bus Ted Knuckle; 06-29-2007 at 01:02 PM. |
06-29-2007, 01:27 PM | #3 |
4 eyed fever
Join Date: Jul 2005
Location: Eureka, Nevada
Posts: 500
|
Re: power steering help needed
It's been almost a year since purchase(i think it was a 90 warranty), no belt slippage, mounted on same brackets. The old pump blew the seal and was spraying PS fluid everywhere. Prior to that it drove perfectly.
Something I forgot to mention. The truck has a serp belt. I didn't check for reverse rotation, but it worked after install,........?
__________________
1971 GMC 2500 4x4 1972 GMC Sierra Grande 1/2 t 4x4-#1 son's truck. Recently completed resto. 4 YO daughter," Daddy, I like your truck better than Mom's." (2000 F350-ranch truck) Smart kid!! |
06-29-2007, 06:37 PM | #4 |
Registered User
Join Date: Sep 2006
Location: holland
Posts: 35
|
Re: power steering help needed
Where the pressure hose is mounted on the pump is an kind of plug you can screw out, and could be different as the old pump. I don't remember if it has a little hole or a valve in it.
You can mount the one from the old pump and try. |
06-30-2007, 11:02 AM | #5 |
4 eyed fever
Join Date: Jul 2005
Location: Eureka, Nevada
Posts: 500
|
Re: power steering help needed
Thanks, I'll check it
__________________
1971 GMC 2500 4x4 1972 GMC Sierra Grande 1/2 t 4x4-#1 son's truck. Recently completed resto. 4 YO daughter," Daddy, I like your truck better than Mom's." (2000 F350-ranch truck) Smart kid!! |
Bookmarks |
|
|