parting 71 chevy 1/2 - The 1947 - Present Chevrolet & GMC Truck Message Board Network

teeitup · 07-06-2007, 07:41 PM

I just hauled this one in. Has PS on it, good shroud, alt brackets etc. Not sure what year the motor is, can anyone help me by ID'ing the exhaust manifolds. I'll try to get a number off the block later. Everything is for sale just ask and I'll price. Thanks Randy

Blue_71 · 07-06-2007, 08:25 PM

manifolds look 81ish. dont look like 73-80 to me, but i do know for sure an 81 i worked on had that type

im guessing thats not a true red steering wheel? looks green in spots

teeitup · 07-06-2007, 09:45 PM

Here is what the block numbers are 19J269043 V0527HV.
They look a little different than 80's to me but I'm not sure, probably are. Yes the inside has all been painted RED

Thanks Randy

RicksTrucks · 07-06-2007, 11:00 PM

What kind of shape is the front bumper in?

PS. Got your msg about the t-shirts and will tell chipflyer tomorrow

CrashEd · 07-06-2007, 11:09 PM

Its a 1965- 327- 350 horse vette motor. cool motor looks to have newer heads on it though.
Ed

ckexswb · 07-06-2007, 11:15 PM

Looking for a clean non ac control...

teeitup · 07-07-2007, 09:30 AM

Rick, its decent not perfect, a couple dings, probably $30 for it. Thansk for telling Jeff for me.
Ed, THANKS for the info, I guess I beeter plan on pulling it, I wonder what it would be worth?
Ckexswb, sorry one of the levers is broke
Thanks Randy

toast2112 · 07-07-2007, 10:04 AM

hello if it an automatic im looking for the shift linkage from the column to the trans compleat, and also the brake pedal assm. shiped to 08234 thanks jim

toast2112 · 07-09-2007, 06:55 PM

hello randy , sorry i didn't get back to you sooner. that sounds like a deal for the shifter linkage and brake pedal assm. just let me know where to send the money once you have it out and have figured out shiping. thanks again jim.

toast2112 · 07-10-2007, 04:37 PM

Quote:

Originally Posted by toast2112

hello randy , sorry i didn't get back to you sooner. that sounds like a deal for the shifter linkage and brake pedal assm. just let me know where to send the money once you have it out and have figured out shiping. thanks again jim.

not to worry randy, when ever you get them out will be fine. just give me a shout when you are ready for some money. thanks again jim

teeitup · 07-10-2007, 05:02 PM

JDL, Yes Jim,, right where you circled.
Toast, Jim, I'll let you know.
Thanks so much, Randy

teeitup · 07-10-2007, 05:37 PM

It does have a drivers side dipstick, I found while scraping the pack rat terds off it. Jim, pm'd you my number. No dipstick but the holder is there by the manifold. Thanks Randy

72 Cheyenne K20 · 07-07-2007, 01:23 PM

Het Randy, inerested in the door panels, any damage to them? Also, do you have any rear sport bumper brackets for a 71 Blazer, need all 4. Shipping is to 55060.

Thanks, Scott

teeitup · 07-07-2007, 01:45 PM

Toast, Jim, for the all linkage and brake pedal setup $50 plus shipping. I'll have to pull it all out to get you a accurate shipping price. It would Mon or Tues before I could get to that, let me know if you want me to get it all out. I'd guess shipping $20-25 but not sure
Scott, I'm at work right now, I'll check them out, I know I have another set of door panels in the shed too. No bumper brackets right now.
Thanks Randy

retodd7711 · 07-07-2007, 03:06 PM

I might be interested in the seat except for that tiny rip

Walts_restoration · 07-07-2007, 03:12 PM

what do you want out of that 327??? id be interested in her, and i can come up and take a look at it sometime this week would be nice.

BurnoutNova · 07-07-2007, 03:42 PM

motor run?

thats an L-79 327... 65 is the first year for them. it should have 11:1 pistons, a forges steel crank, hydraulic .447" cam and a factory windage tray... if it has the vette oil pan.

if everything is machineable, or still in good shape it would be worth AT LEAST $500... more if it runs

Walts_restoration · 07-07-2007, 03:46 PM

All depending on the orignality and quality of the motor. Ive got 130 some 327s, as well as more engines. My dad can tell if there has ever been a bolt removed on one of them (raced 327s for 20 some years, held a few world records in the AHRA, etc)

70GMCer · 07-07-2007, 03:58 PM

Randy.....I'm looking for a good left hand window regulator assembly and also a good left hand latch assembly that works locks when using the key. How much to 21085

steve

mexgrhd68 · 07-07-2007, 05:10 PM

Randy, interested on the dash pad, how much? and shipping to Visalia, California 93277?

teeitup · 07-07-2007, 09:37 PM

retodd, its only a SMALL rip!!

Walt's, I have a guy from Lawrence coming to look at it this week, I'll let you know asap. He rebuilds engines over there.
Burnout, THANKS for the info. I figured it was a good find when I found out 65 Vette 327, my brother had a 65 vette and we looked everywhere trying to find a 327 to put in it
70GMCer, Steve, I'll check them out, it will be Monday evening before I have a chance. I''m busy all day on Sunday
Mexgrhd68, its torn, not any good. Sorry
Thanks Randy

**72ironmike** · 07-07-2007, 11:20 PM

Randy, There is a Corvette board like ours. I think it is called "Corvette Forum". I just sold a 427 Tripower intake and carbs for $2500.00 on that board.

That motor should be worth a few dollars. Nice find.

Not sure I need one yet but how much for the front suspension crossmember only?

69ChevyLB · 07-08-2007, 12:21 AM

How much for the PS pump brackets. That 327/350 should have had a Holley on it.

wibilly · 07-08-2007, 12:52 AM

i'm not seeing a dipstick tube on the drivers side. if it is on the passenger side it is a 1980 or newer block

nplocoman · 07-08-2007, 01:34 AM

I should know better but, are the inner front fenders good?

07-06-2007, 07:41 PM	#1
teeitup Just like to part out trucks!! Join Date: Nov 2001 Location: Meriden, Ks-North of Topeka 10 miles Posts: 27,396	parting 71 chevy 1/2 I just hauled this one in. Has PS on it, good shroud, alt brackets etc. Not sure what year the motor is, can anyone help me by ID'ing the exhaust manifolds. I'll try to get a number off the block later. Everything is for sale just ask and I'll price. Thanks Randy Attached Images __________________ 67 Chev swb stepside 4x4 283 4 speed SOLD 72 blazer 4x4 4 speed Cheyenne 72 GMC swb 4x4 fleet 4 speed, original paint 1958 Cameo (one of 1405 built, it was my dads) 2020 chevy Apex 4x4 crew cab 1969 Z28 with the 302 1980 chevy swb 4x4 1964 chevell Malibu SS 1976 K20, sold new originally out of my dads chevy dealership Members that I've met, over 200 probably closer to 300 in the 12 years I've been on this site, everyone I met "It was a pleasure"

07-06-2007, 09:45 PM	#3
teeitup Just like to part out trucks!! Join Date: Nov 2001 Location: Meriden, Ks-North of Topeka 10 miles Posts: 27,396	Re: parting 71 chevy 1/2 Here is what the block numbers are 19J269043 V0527HV. They look a little different than 80's to me but I'm not sure, probably are. Yes the inside has all been painted RED Thanks Randy __________________ 67 Chev swb stepside 4x4 283 4 speed SOLD 72 blazer 4x4 4 speed Cheyenne 72 GMC swb 4x4 fleet 4 speed, original paint 1958 Cameo (one of 1405 built, it was my dads) 2020 chevy Apex 4x4 crew cab 1969 Z28 with the 302 1980 chevy swb 4x4 1964 chevell Malibu SS 1976 K20, sold new originally out of my dads chevy dealership Members that I've met, over 200 probably closer to 300 in the 12 years I've been on this site, everyone I met "It was a pleasure"

07-06-2007, 11:00 PM	#4
RicksTrucks Senior Member Join Date: Jan 2005 Location: Claremore, OK 74017 Posts: 2,640	Re: parting 71 chevy 1/2 What kind of shape is the front bumper in? PS. Got your msg about the t-shirts and will tell chipflyer tomorrow __________________ 68 Short Stepside C-10 69 SWB C-10 70 Flatbed C-20 70 LWB C-20 BB402 70 LWB C-10 CST 70 LWB C-10 CST 71 Short Stepside Cheyenne C-10 72 LWB C-10 72 Blazer 4x4 4spd 95 Jeep Cherokee 4x4

07-06-2007, 11:09 PM	#5
CrashEd 72 chevy Join Date: Jan 2007 Location: Central Il Posts: 725	Re: parting 71 chevy 1/2 Its a 1965- 327- 350 horse vette motor. cool motor looks to have newer heads on it though. Ed

07-06-2007, 11:15 PM	#6
ckexswb 67-72=-5 Join Date: Jun 2007 Location: calif/ beach Posts: 807	Re: parting 71 chevy 1/2 Looking for a clean non ac control...

07-07-2007, 09:30 AM	#7
teeitup Just like to part out trucks!! Join Date: Nov 2001 Location: Meriden, Ks-North of Topeka 10 miles Posts: 27,396	Re: parting 71 chevy 1/2 Rick, its decent not perfect, a couple dings, probably $30 for it. Thansk for telling Jeff for me. Ed, THANKS for the info, I guess I beeter plan on pulling it, I wonder what it would be worth? Ckexswb, sorry one of the levers is broke Thanks Randy __________________ 67 Chev swb stepside 4x4 283 4 speed SOLD 72 blazer 4x4 4 speed Cheyenne 72 GMC swb 4x4 fleet 4 speed, original paint 1958 Cameo (one of 1405 built, it was my dads) 2020 chevy Apex 4x4 crew cab 1969 Z28 with the 302 1980 chevy swb 4x4 1964 chevell Malibu SS 1976 K20, sold new originally out of my dads chevy dealership Members that I've met, over 200 probably closer to 300 in the 12 years I've been on this site, everyone I met "It was a pleasure"

07-07-2007, 10:04 AM	#8
toast2112 active member Join Date: Jul 2006 Location: egg harbor township, new jersey Posts: 37	Re: parting 71 chevy 1/2 hello if it an automatic im looking for the shift linkage from the column to the trans compleat, and also the brake pedal assm. shiped to 08234 thanks jim

07-09-2007, 06:55 PM	#9
toast2112 active member Join Date: Jul 2006 Location: egg harbor township, new jersey Posts: 37	Re: parting 71 chevy 1/2 hello randy , sorry i didn't get back to you sooner. that sounds like a deal for the shifter linkage and brake pedal assm. just let me know where to send the money once you have it out and have figured out shiping. thanks again jim. Last edited by toast2112; 07-09-2007 at 06:57 PM.

07-10-2007, 05:02 PM	#11
teeitup Just like to part out trucks!! Join Date: Nov 2001 Location: Meriden, Ks-North of Topeka 10 miles Posts: 27,396	Re: parting 71 chevy 1/2 JDL, Yes Jim,, right where you circled. Toast, Jim, I'll let you know. Thanks so much, Randy __________________ 67 Chev swb stepside 4x4 283 4 speed SOLD 72 blazer 4x4 4 speed Cheyenne 72 GMC swb 4x4 fleet 4 speed, original paint 1958 Cameo (one of 1405 built, it was my dads) 2020 chevy Apex 4x4 crew cab 1969 Z28 with the 302 1980 chevy swb 4x4 1964 chevell Malibu SS 1976 K20, sold new originally out of my dads chevy dealership Members that I've met, over 200 probably closer to 300 in the 12 years I've been on this site, everyone I met "It was a pleasure"

07-10-2007, 05:37 PM	#12
teeitup Just like to part out trucks!! Join Date: Nov 2001 Location: Meriden, Ks-North of Topeka 10 miles Posts: 27,396	Re: parting 71 chevy 1/2 It does have a drivers side dipstick, I found while scraping the pack rat terds off it. Jim, pm'd you my number. No dipstick but the holder is there by the manifold. Thanks Randy Attached Images __________________ 67 Chev swb stepside 4x4 283 4 speed SOLD 72 blazer 4x4 4 speed Cheyenne 72 GMC swb 4x4 fleet 4 speed, original paint 1958 Cameo (one of 1405 built, it was my dads) 2020 chevy Apex 4x4 crew cab 1969 Z28 with the 302 1980 chevy swb 4x4 1964 chevell Malibu SS 1976 K20, sold new originally out of my dads chevy dealership Members that I've met, over 200 probably closer to 300 in the 12 years I've been on this site, everyone I met "It was a pleasure"

07-07-2007, 01:23 PM	#13
72 Cheyenne K20 Registered User Join Date: Feb 2003 Location: Staunton, Virginia Posts: 554	Re: parting 71 chevy 1/2 Het Randy, inerested in the door panels, any damage to them? Also, do you have any rear sport bumper brackets for a 71 Blazer, need all 4. Shipping is to 55060. Thanks, Scott

07-07-2007, 01:45 PM	#14
teeitup Just like to part out trucks!! Join Date: Nov 2001 Location: Meriden, Ks-North of Topeka 10 miles Posts: 27,396	Re: parting 71 chevy 1/2 Toast, Jim, for the all linkage and brake pedal setup $50 plus shipping. I'll have to pull it all out to get you a accurate shipping price. It would Mon or Tues before I could get to that, let me know if you want me to get it all out. I'd guess shipping $20-25 but not sure Scott, I'm at work right now, I'll check them out, I know I have another set of door panels in the shed too. No bumper brackets right now. Thanks Randy __________________ 67 Chev swb stepside 4x4 283 4 speed SOLD 72 blazer 4x4 4 speed Cheyenne 72 GMC swb 4x4 fleet 4 speed, original paint 1958 Cameo (one of 1405 built, it was my dads) 2020 chevy Apex 4x4 crew cab 1969 Z28 with the 302 1980 chevy swb 4x4 1964 chevell Malibu SS 1976 K20, sold new originally out of my dads chevy dealership Members that I've met, over 200 probably closer to 300 in the 12 years I've been on this site, everyone I met "It was a pleasure" Last edited by teeitup; 07-07-2007 at 01:46 PM.

07-07-2007, 03:06 PM	#15
retodd7711 chrome makes it go FASTER! Join Date: Feb 2007 Location: Cleveland Tennessee Posts: 2,884	Re: parting 71 chevy 1/2 I might be interested in the seat except for that tiny rip __________________ She can't cook and she won't clean. But she looks good in a skirt and she brings me beer. She can stay for now. EDIT:: But she left me anyway, So forget her. 1962 GMC Stepside V6 4 speed My rolling resto thread http://67-72chevytrucks.com/vboard/s...d.php?t=324226 My old farm truck http://67-72chevytrucks.com/vboard/s...=1#post3465005

07-07-2007, 03:12 PM	#16
Walts_restoration Real Projects never die Join Date: Jan 2007 Location: Lawrence, kansas Posts: 1,508	Re: parting 71 chevy 1/2 what do you want out of that 327??? id be interested in her, and i can come up and take a look at it sometime this week would be nice. __________________ Ill put it this way, ive got a few lawn ornaments My name tag says Ryan KansasTwister On other forums

07-07-2007, 03:42 PM	#17
BurnoutNova Registered User Join Date: Mar 2004 Location: CA Posts: 2,057	Re: parting 71 chevy 1/2 motor run? thats an L-79 327... 65 is the first year for them. it should have 11:1 pistons, a forges steel crank, hydraulic .447" cam and a factory windage tray... if it has the vette oil pan. if everything is machineable, or still in good shape it would be worth AT LEAST $500... more if it runs



Register or Log In To remove these advertisements.

07-07-2007, 03:46 PM	#18
Walts_restoration Real Projects never die Join Date: Jan 2007 Location: Lawrence, kansas Posts: 1,508	Re: parting 71 chevy 1/2 All depending on the orignality and quality of the motor. Ive got 130 some 327s, as well as more engines. My dad can tell if there has ever been a bolt removed on one of them (raced 327s for 20 some years, held a few world records in the AHRA, etc) __________________ Ill put it this way, ive got a few lawn ornaments My name tag says Ryan KansasTwister On other forums

07-07-2007, 03:58 PM	#19
70GMCer Senior Member Join Date: Apr 2005 Location: Joppa, Maryland Posts: 4,408	Re: parting 71 chevy 1/2 Randy.....I'm looking for a good left hand window regulator assembly and also a good left hand latch assembly that works locks when using the key. How much to 21085 steve __________________ 1997 GMC Sierra Ext 1965 Mustang

07-07-2007, 05:10 PM	#20
mexgrhd68 Registered User Join Date: Apr 2007 Location: Visalia, CA. Posts: 327	Re: parting 71 chevy 1/2 Randy, interested on the dash pad, how much? and shipping to Visalia, California 93277? __________________ 68 c-10 1/2 ton swb fleetside, 79 GMC Sierra Grande 1/2 ton swb fleetside, 99 Dodge Durango 4x4(wifes ride),53 and 55 chevy trucks(dads trucks ) 54 caddy 62 series 4 door(younger sons ride, aka 54caddy ) 70 caddy 2 door, 89 chevy silverado stepside(older sons rides )

07-07-2007, 09:37 PM	#21
teeitup Just like to part out trucks!! Join Date: Nov 2001 Location: Meriden, Ks-North of Topeka 10 miles Posts: 27,396	Re: parting 71 chevy 1/2 retodd, its only a SMALL rip!! Walt's, I have a guy from Lawrence coming to look at it this week, I'll let you know asap. He rebuilds engines over there. Burnout, THANKS for the info. I figured it was a good find when I found out 65 Vette 327, my brother had a 65 vette and we looked everywhere trying to find a 327 to put in it 70GMCer, Steve, I'll check them out, it will be Monday evening before I have a chance. I''m busy all day on Sunday Mexgrhd68, its torn, not any good. Sorry Thanks Randy __________________ 67 Chev swb stepside 4x4 283 4 speed SOLD 72 blazer 4x4 4 speed Cheyenne 72 GMC swb 4x4 fleet 4 speed, original paint 1958 Cameo (one of 1405 built, it was my dads) 2020 chevy Apex 4x4 crew cab 1969 Z28 with the 302 1980 chevy swb 4x4 1964 chevell Malibu SS 1976 K20, sold new originally out of my dads chevy dealership Members that I've met, over 200 probably closer to 300 in the 12 years I've been on this site, everyone I met "It was a pleasure"

07-07-2007, 11:20 PM	#22
72ironmike Senior Member Join Date: Jan 2004 Location: Olathe KS (Greater Kansas City MO Area) Posts: 2,053	Re: parting 71 chevy 1/2 Randy, There is a Corvette board like ours. I think it is called "Corvette Forum". I just sold a 427 Tripower intake and carbs for $2500.00 on that board. That motor should be worth a few dollars. Nice find. Not sure I need one yet but how much for the front suspension crossmember only? Last edited by 72ironmike; 07-07-2007 at 11:23 PM.

07-08-2007, 12:21 AM	#23
69ChevyLB Active Member Join Date: Aug 2004 Location: Canton, OH Posts: 249	Re: parting 71 chevy 1/2 How much for the PS pump brackets. That 327/350 should have had a Holley on it. __________________ 69 C10 LWB Project 47 Cushman Scooter Project It is better to have loved and lost than to live with a psycho all your life.

07-08-2007, 12:52 AM	#24
wibilly Senior Member Join Date: Nov 2005 Location: northwestern wi Posts: 2,111	Re: parting 71 chevy 1/2 i'm not seeing a dipstick tube on the drivers side. if it is on the passenger side it is a 1980 or newer block __________________ common sense isn't so common anymore

07-08-2007, 01:34 AM	#25
nplocoman never finish start another Join Date: Mar 2007 Location: North Platte Nebraska Posts: 432	Re: parting 71 chevy 1/2 I should know better but, are the inner front fenders good?

Register or Log In To remove these advertisements.