Early Ramshorns from`68 Custom/10 - The 1947 - Present Chevrolet & GMC Truck Message Board Network

**special-K** · 07-17-2007, 08:23 PM

Nice pair of early head ramshorns.These were on a clean`68 truck I used headers on.Fits 2wd SBC...$75+ shipping.EC

1LoC10 · 07-17-2007, 08:24 PM

what are the casting numbers on them

**special-K** · 07-18-2007, 06:37 AM

From what I can tell:
LH 3855163A

RH 3888858

**special-K** · 07-21-2007, 08:01 AM

Ttt

crzngmychvy · 07-22-2007, 01:42 PM

How much would shipping be to 92113? thanks

**special-K** · 07-22-2007, 05:04 PM

It looks like about $30.(heavy)

**special-K** · 07-25-2007, 07:56 PM

Good stuff.

crzngmychvy · 07-26-2007, 01:47 AM

With the shipping that is more than I was hoping to put in to some ramhorns. I assume that these are 2", as I've seen people refer to 2.5" as being preferred. I'm looking to replace my cheap headers with manifolds, but not too sure just yet. When I switch out engines I will have aluminum heads - will using these be an issue? Anything else I should know?

Just looking for feedback before I set down funds. thanks!

**special-K** · 07-26-2007, 04:52 AM

I think if you want to build for performance(aluminum/flowed heads)you should get the 2 1/2" Vette ramshorns.They`ll cost more,but 1/2 is alot of flow.What I have are best on a resto or just a mild built custom.

crzngmychvy · 07-26-2007, 11:02 PM

Quote:

Originally Posted by special-K

I think if you want to build for performance(aluminum/flowed heads)you should get the 2 1/2" Vette ramshorns.They`ll cost more,but 1/2 is alot of flow.What I have are best on a resto or just a mild built custom.

That's why this board is so great - straight up feedback with no hidden interests, just a shared interest in our hobby/passion.

Thanks for the info. I'll have to pass this time, but here is a bump for you...

**special-K** · 07-27-2007, 08:47 AM

Check out Pickmup(Frank)up in Washington.He had a thread with mandrel elbows coming off the 2 1/2" ramshorns.

07-17-2007, 08:23 PM	#1
special-K Special Order Join Date: Nov 2004 Location: Mt Airy, MD Posts: 85,851	Early Ramshorns from`68 Custom/10 Nice pair of early head ramshorns.These were on a clean`68 truck I used headers on.Fits 2wd SBC...$75+ shipping.EC __________________ "BUILDING A BETTER WAY TO SERVE THE USA"......67/72......"The New Breed" GMC '67 C1500 Wideside Super Custom SWB: 327/M22/3.42 posi.........."The '67" (project) GMC '72 K2500 Wideside Sierra Custom Camper: 350/TH350/4.10 Power-Lok..."The '72" (rolling) Tim "Don't call me a redneck. I'm a rough cut country gentleman" R.I.P. ~ East Side Low Life ~ El Jay ~ 72BLUZ ~ Fasteddie69 ~ Ron586 ~ 67ChevyRedneck ~ Grumpy Old Man ~

07-17-2007, 08:24 PM	#2
1LoC10 Insert Title Here Join Date: Feb 2006 Location: Dyer, Indiana Posts: 5,679	Re: Early Ramshorns from`68 Custom/10 what are the casting numbers on them __________________ BOBBY _69 SWB_ 1000 pics of 67-72's>> http://s193.photobucket.com/albums/z...-72/?start=all <<

07-18-2007, 06:37 AM	#3
special-K Special Order Join Date: Nov 2004 Location: Mt Airy, MD Posts: 85,851	Re: Early Ramshorns from`68 Custom/10 From what I can tell: LH 3855163A RH 3888858 __________________ "BUILDING A BETTER WAY TO SERVE THE USA"......67/72......"The New Breed" GMC '67 C1500 Wideside Super Custom SWB: 327/M22/3.42 posi.........."The '67" (project) GMC '72 K2500 Wideside Sierra Custom Camper: 350/TH350/4.10 Power-Lok..."The '72" (rolling) Tim "Don't call me a redneck. I'm a rough cut country gentleman" R.I.P. ~ East Side Low Life ~ El Jay ~ 72BLUZ ~ Fasteddie69 ~ Ron586 ~ 67ChevyRedneck ~ Grumpy Old Man ~

07-21-2007, 08:01 AM	#4
special-K Special Order Join Date: Nov 2004 Location: Mt Airy, MD Posts: 85,851	Re: Early Ramshorns from`68 Custom/10 Ttt __________________ "BUILDING A BETTER WAY TO SERVE THE USA"......67/72......"The New Breed" GMC '67 C1500 Wideside Super Custom SWB: 327/M22/3.42 posi.........."The '67" (project) GMC '72 K2500 Wideside Sierra Custom Camper: 350/TH350/4.10 Power-Lok..."The '72" (rolling) Tim "Don't call me a redneck. I'm a rough cut country gentleman" R.I.P. ~ East Side Low Life ~ El Jay ~ 72BLUZ ~ Fasteddie69 ~ Ron586 ~ 67ChevyRedneck ~ Grumpy Old Man ~

07-22-2007, 01:42 PM	#5
crzngmychvy "1972 C5" Join Date: Jul 2004 Location: SoCal Posts: 729	Re: Early Ramshorns from`68 Custom/10 How much would shipping be to 92113? thanks __________________ - 72 2wd Blazer ...sold... 2wd Blazer Page

07-22-2007, 05:04 PM	#6
special-K Special Order Join Date: Nov 2004 Location: Mt Airy, MD Posts: 85,851	Re: Early Ramshorns from`68 Custom/10 It looks like about $30.(heavy) __________________ "BUILDING A BETTER WAY TO SERVE THE USA"......67/72......"The New Breed" GMC '67 C1500 Wideside Super Custom SWB: 327/M22/3.42 posi.........."The '67" (project) GMC '72 K2500 Wideside Sierra Custom Camper: 350/TH350/4.10 Power-Lok..."The '72" (rolling) Tim "Don't call me a redneck. I'm a rough cut country gentleman" R.I.P. ~ East Side Low Life ~ El Jay ~ 72BLUZ ~ Fasteddie69 ~ Ron586 ~ 67ChevyRedneck ~ Grumpy Old Man ~

07-25-2007, 07:56 PM	#7
special-K Special Order Join Date: Nov 2004 Location: Mt Airy, MD Posts: 85,851	Re: Early Ramshorns from`68 Custom/10 Good stuff. __________________ "BUILDING A BETTER WAY TO SERVE THE USA"......67/72......"The New Breed" GMC '67 C1500 Wideside Super Custom SWB: 327/M22/3.42 posi.........."The '67" (project) GMC '72 K2500 Wideside Sierra Custom Camper: 350/TH350/4.10 Power-Lok..."The '72" (rolling) Tim "Don't call me a redneck. I'm a rough cut country gentleman" R.I.P. ~ East Side Low Life ~ El Jay ~ 72BLUZ ~ Fasteddie69 ~ Ron586 ~ 67ChevyRedneck ~ Grumpy Old Man ~

07-26-2007, 01:47 AM	#8
crzngmychvy "1972 C5" Join Date: Jul 2004 Location: SoCal Posts: 729	Re: Early Ramshorns from`68 Custom/10 With the shipping that is more than I was hoping to put in to some ramhorns. I assume that these are 2", as I've seen people refer to 2.5" as being preferred. I'm looking to replace my cheap headers with manifolds, but not too sure just yet. When I switch out engines I will have aluminum heads - will using these be an issue? Anything else I should know? Just looking for feedback before I set down funds. thanks! __________________ - 72 2wd Blazer ...sold... 2wd Blazer Page

07-26-2007, 04:52 AM	#9
special-K Special Order Join Date: Nov 2004 Location: Mt Airy, MD Posts: 85,851	Re: Early Ramshorns from`68 Custom/10 I think if you want to build for performance(aluminum/flowed heads)you should get the 2 1/2" Vette ramshorns.They`ll cost more,but 1/2 is alot of flow.What I have are best on a resto or just a mild built custom. __________________ "BUILDING A BETTER WAY TO SERVE THE USA"......67/72......"The New Breed" GMC '67 C1500 Wideside Super Custom SWB: 327/M22/3.42 posi.........."The '67" (project) GMC '72 K2500 Wideside Sierra Custom Camper: 350/TH350/4.10 Power-Lok..."The '72" (rolling) Tim "Don't call me a redneck. I'm a rough cut country gentleman" R.I.P. ~ East Side Low Life ~ El Jay ~ 72BLUZ ~ Fasteddie69 ~ Ron586 ~ 67ChevyRedneck ~ Grumpy Old Man ~

07-27-2007, 08:47 AM	#11
special-K Special Order Join Date: Nov 2004 Location: Mt Airy, MD Posts: 85,851	Re: Early Ramshorns from`68 Custom/10 Check out Pickmup(Frank)up in Washington.He had a thread with mandrel elbows coming off the 2 1/2" ramshorns. __________________ "BUILDING A BETTER WAY TO SERVE THE USA"......67/72......"The New Breed" GMC '67 C1500 Wideside Super Custom SWB: 327/M22/3.42 posi.........."The '67" (project) GMC '72 K2500 Wideside Sierra Custom Camper: 350/TH350/4.10 Power-Lok..."The '72" (rolling) Tim "Don't call me a redneck. I'm a rough cut country gentleman" R.I.P. ~ East Side Low Life ~ El Jay ~ 72BLUZ ~ Fasteddie69 ~ Ron586 ~ 67ChevyRedneck ~ Grumpy Old Man ~



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.