WIW 3/4t Axles - The 1947 - Present Chevrolet & GMC Truck Message Board Network

sdailey · 07-19-2007, 09:30 AM

I'll be removing the 3/4t axles from my truck here shortly to replace them with some 1/2t ones from a donor truck.

What are these axles worth? I'm unsure of the gear ratio at the moment.

Dana 44 closed knuckle w-drum brakes up front

Eaton/HO52 w-drum brakes in the rear

1969k10stepside · 07-19-2007, 09:34 AM

I'd say $150-$200 for the pair.The rear would be worth the most since the front is a closed knuckle.

sdailey · 07-19-2007, 09:42 AM

Thanks Dustin.

**special-K** · 07-19-2007, 02:03 PM

I`d say around $300.A pair of 8-luggers is a cool upgrade for the zillion 1/2tons out there.The slightly antiquated axles wouldn`t be such a drawback on a custom-build.They also have a value to the limited original restoration crowd.You may need to sell for $150-200,but let them go to use and not scrap,whatever you do.The parts are worth $150-200.

atltd4x4 · 07-31-2007, 08:51 PM

How much for the eaton rear end?

sdailey · 08-01-2007, 07:55 AM

Quote:

Originally Posted by atltd4x4

How much for the eaton rear end?

Sent you a pm.

goldengoat2 · 07-31-2007, 09:53 PM

I a'm also removing my closed knuckle axle out of my 67 3/4 ton 4x4, I will have a spare 3/4 ton closed knuckle with no new home.

07-19-2007, 09:30 AM	#1
sdailey The Few, The Proud Join Date: Jun 2007 Location: Ball Ground, Georgia Posts: 1,830	WIW 3/4t Axles I'll be removing the 3/4t axles from my truck here shortly to replace them with some 1/2t ones from a donor truck. What are these axles worth? I'm unsure of the gear ratio at the moment. Dana 44 closed knuckle w-drum brakes up front Eaton/HO52 w-drum brakes in the rear __________________ Shannon Last edited by sdailey; 07-19-2007 at 09:30 AM.

07-19-2007, 09:34 AM	#2
1969k10stepside Registered User Join Date: Mar 2006 Location: USA Posts: 21,020	Re: WIW 3/4t Axles I'd say $150-$200 for the pair.The rear would be worth the most since the front is a closed knuckle.

07-19-2007, 09:42 AM	#3
sdailey The Few, The Proud Join Date: Jun 2007 Location: Ball Ground, Georgia Posts: 1,830	Re: WIW 3/4t Axles Thanks Dustin. __________________ Shannon

07-19-2007, 02:03 PM	#4
special-K Special Order Join Date: Nov 2004 Location: Mt Airy, MD Posts: 85,861	Re: WIW 3/4t Axles I`d say around $300.A pair of 8-luggers is a cool upgrade for the zillion 1/2tons out there.The slightly antiquated axles wouldn`t be such a drawback on a custom-build.They also have a value to the limited original restoration crowd.You may need to sell for $150-200,but let them go to use and not scrap,whatever you do.The parts are worth $150-200. __________________ "BUILDING A BETTER WAY TO SERVE THE USA"......67/72......"The New Breed" GMC '67 C1500 Wideside Super Custom SWB: 327/M22/3.42 posi.........."The '67" (project) GMC '72 K2500 Wideside Sierra Custom Camper: 350/TH350/4.10 Power-Lok..."The '72" (rolling) Tim "Don't call me a redneck. I'm a rough cut country gentleman" R.I.P. ~ East Side Low Life ~ El Jay ~ 72BLUZ ~ Fasteddie69 ~ Ron586 ~ 67ChevyRedneck ~ Grumpy Old Man ~

07-31-2007, 08:51 PM	#5
atltd4x4 Registered User Join Date: Oct 2006 Location: Newnan GA Posts: 87	Re: WIW 3/4t Axles How much for the eaton rear end?

07-31-2007, 09:53 PM	#7
goldengoat2 Registered User Join Date: May 2007 Location: Erie pa. Posts: 57	Re: WIW 3/4t Axles I a'm also removing my closed knuckle axle out of my 67 3/4 ton 4x4, I will have a spare 3/4 ton closed knuckle with no new home. __________________ 65 tripower conv 4spd gto, 66gto, 67 gto 65 lemans conv 4spd 69 firebird conv. 67 c20 4x4



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.