1989 350 TBI engine-$400 - The 1947 - Present Chevrolet & GMC Truck Message Board Network

**crossy** · 07-21-2007, 12:15 PM

350 TBI runs very well and reasonably maintained.has 104,000 miles and makes no noises and only the slightest puff of smoke on some start ups. clean and does not appear to be a leaker.$400
Has the direable Serpentine belt set-up already on the front.
I CAN, and will, provide all of that stuff if you are loooking to do a TBI conversion. I already have a complete TBI wiring set up off that is labeled. you'll have to call me to discuss that. Minimal $ if you buy the engine. thanx , crossy
__________________

5 minutes from Delaware Memorial Bridge. At end (bottom) of NJ turnpike, ALSO Routes 130 ,49, 40 and 295 all end in Pennsville, so easy to get to.
thanx , crossy

856-678-7883 before 9PM EST
dbcrossy@verizon.net

HavinSomeFun · 07-21-2007, 12:38 PM

so how do I get this to Arkansas?

**crossy** · 07-21-2007, 01:04 PM

It wouldn't be the first one I crated.(5) If your serious it could cost $300 or so to get there and i can get an exact weight . i can take to a dock for cheaper freight.

Anyone with suggstions to help this guy out PLEASE chime in.

07-21-2007, 12:15 PM	#1
crossy Oh,you can't buy that new Join Date: Apr 2000 Location: Pennsville,N.J. 08070, USA Posts: 2,039	1989 350 TBI engine-$400 350 TBI runs very well and reasonably maintained.has 104,000 miles and makes no noises and only the slightest puff of smoke on some start ups. clean and does not appear to be a leaker.$400 Has the direable Serpentine belt set-up already on the front. I CAN, and will, provide all of that stuff if you are loooking to do a TBI conversion. I already have a complete TBI wiring set up off that is labeled. you'll have to call me to discuss that. Minimal $ if you buy the engine. thanx , crossy __________________ 5 minutes from Delaware Memorial Bridge. At end (bottom) of NJ turnpike, ALSO Routes 130 ,49, 40 and 295 all end in Pennsville, so easy to get to. thanx , crossy 856-678-7883 before 9PM EST dbcrossy@verizon.net __________________ "been there, done that, ruined the T-shirt". 2007 LBZ GMC Sierra, ECSB 2006 LM7 RCSB Silverado 98 Vortec project. 94,3500,6.5L 4L80 81 SWB GMC POS finally gone 73 Pinto, stock, w/CragarSS's-eww LOTS of Cummins trucks.

07-21-2007, 12:38 PM	#2
HavinSomeFun Still Just Havin Some Fun! Join Date: Jun 2007 Location: Piedmont, Oklahoma Posts: 1,145	Re: 1989 350 TBI engine-$400 so how do I get this to Arkansas? __________________ a green one with some stuff done to it....

07-21-2007, 01:04 PM	#3
crossy Oh,you can't buy that new Join Date: Apr 2000 Location: Pennsville,N.J. 08070, USA Posts: 2,039	Re: 1989 350 TBI engine-$400 It wouldn't be the first one I crated.(5) If your serious it could cost $300 or so to get there and i can get an exact weight . i can take to a dock for cheaper freight. Anyone with suggstions to help this guy out PLEASE chime in. __________________ "been there, done that, ruined the T-shirt". 2007 LBZ GMC Sierra, ECSB 2006 LM7 RCSB Silverado 98 Vortec project. 94,3500,6.5L 4L80 81 SWB GMC POS finally gone 73 Pinto, stock, w/CragarSS's-eww LOTS of Cummins trucks.



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.