|
|
|
07-24-2007, 01:44 PM
|
#1 |
|
Right turn Clyde
Join Date: Nov 2002
Location: Cincinnati, Ohio
Posts: 2,911
|
Upper A-arm studs
I borrowed this picture from RedRat to show what I'm talking about.
I'm wondering if those studs are replaceable? If not how would you go about fixing it if one broke? The ones I'm looking are pretty rusted up tread wise. I know when I go to remove the nuts they are going to snap the stud.
__________________
1974 C25 LWB: 454 4bbl Carb / TH400 / 3.73 1992 Camaro RS 305 TBI Last edited by MylilBowTie; 07-24-2007 at 01:45 PM. Reason: spelling |
|
|
|
07-24-2007, 02:15 PM
|
#2 |
|
Dark Heart Motorsports
Join Date: Apr 2007
Location: 29404 DKFX
Posts: 683
|
Re: Upper A-arm studs
I take it WD40 wont help with getting them off breh?
__________________
How Deep Can YOU Bleed..? 1985 Chevy Blazer K5- 6.2 N/A, 400 turbo trans CUCV, 12v converted... a new chapter 2005 GMC Sierra Crew Cab 6.0 powwwaa!!! custom jumpseat install w/ captain seats, Hypertech tuner, MSD Blaster Coils, CB and twin antenna's, all electric interior, touch screen in dash. custom center console, with jump seat replacing original console. 1500 HD! |
|
|
|
|
07-24-2007, 02:37 PM
|
#3 |
|
Right turn Clyde
Join Date: Nov 2002
Location: Cincinnati, Ohio
Posts: 2,911
|
Re: Upper A-arm studs
I use Kroil and I don't think it would be a bad idea to soak them down. I think its just inevitable that its going to break. The threads are rusted off in some areas its a mess. That's why I've held off on trying to mess with it and open pandoras box getting it fixed correctly again.
__________________
1974 C25 LWB: 454 4bbl Carb / TH400 / 3.73 1992 Camaro RS 305 TBI |
|
|
|
|
07-24-2007, 02:48 PM
|
#4 |
|
Registered User
Join Date: Apr 2005
Location: Austin, TX
Posts: 1,223
|
Re: Upper A-arm studs
__________________
- Greg |
|
|
|
|
07-24-2007, 05:30 PM
|
#5 |
|
STILL PLAYS WITH TRUX
Join Date: Nov 2002
Location: Melbourne, Fla.
Posts: 2,764
|
Re: Upper A-arm studs
They are totally replaceable all ya do is knock them out with a good 3X air hammer.........Not an air chisle.
Use either the Kroil or PB Blaster to soak the studs with and don't try to trun them because they are splined under the head just like a lug nut stud. Goog luck. |
|
|
|
 |
| Bookmarks |
|
|
Hybrid Mode
