72 Jimmy/Blazer passenger door parts - The 1947 - Present Chevrolet & GMC Truck Message Board Network

hgs_notes · 07-27-2007, 09:16 PM

I have a nice black door panel, 72 style, $35 shipped. The arm rest is good too. Comes with the gromets for hand crank/door latch.

I also have the door latch and window crank. Driver condition, $7.50 shipped.SOLD

The window regulator was working nice and smooth, the rollers can be replaced (they work ok), LMC sells them separate. Comes with the screws. $20.00 shipped.SOLD

The door handle latch control is $12.00 shipped.

Last but not least, the blazer door specific hardware pieces. Those little metal pieces that go in the jams and the plastic piece that is at the top of the vent window. I can get the reinforcement plate from the latch also, but I haven't drilled it out yet. I also have the rear glass run for the blazer style, but it has some wear on it and is cracked where the holding screw goes through. If the buyer wants it, I'll include it for an extra $2.00 to help cover shipping. This lot is SOLD. Thanks Rick

RicksTrucks · 07-27-2007, 09:50 PM

Quote:

Originally Posted by hgs_notes

Last but not least, the blazer door specific hardware pieces. Those little metal pieces that go in the jams and the plastic piece that is at the top of the vent window. I can get the reinforcement plate from the latch also, but I haven't drilled it out yet. I also have the rear glass run for the blazer style, but it has some wear on it and is cracked where the holding screw goes through. If the buyer wants it, I'll include it for an extra $2.00 to help cover shipping. This lot sells for $20.00 shipped.

I am interested in this lot. Do you need anything that I could trade you for it?

hgs_notes · 07-27-2007, 11:00 PM

My list of wants runs long and wide...j/k. There isn't much I'm looking for right now. I could use an HEI distributor cap with coil, spreadbore 4 barrel carb (rebuildable stocker is fine), I need an alternator (preferably internal regulated) a single rear seat hold down clamp (I'm missing one), rear seat seat belts (black or white), 14" chrome air cleaner, and there are some johnny lightning blazers I'd like to add to my collection. That's about it.

Realistically, I'd rather get the $20.00.

**6t727t2** · 07-28-2007, 11:53 AM

Next in line for the door specific lot.

hgs_notes · 07-28-2007, 02:51 PM

RicksTrucks, please respond if you are still interested or not, so I can move on this.

Also, for anyone interested, I have the door glass I'll let go for the shipping cost.

RicksTrucks · 07-28-2007, 05:26 PM

I will take it and please include the reinforcement plate for the latch. PM me how you want payment.

hgs_notes · 07-29-2007, 07:38 PM

RicksTrucks is taking the blazer specific stuff, thank you. Any interest in the other door parts? The panel is real good, just a little dirty. I guess I should have cleaned it up before I took the picture, anyway...

RicksTrucks · 07-29-2007, 09:05 PM

PayPal made for Blazer specific parts and the rear glass run for the blazer style

hgs_notes · 07-30-2007, 03:52 PM

door panel, latch, regulator still available.

07-27-2007, 09:16 PM	#1
hgs_notes GEARHEAD Join Date: Aug 2003 Location: MN Posts: 6,125	72 Jimmy/Blazer passenger door parts I have a nice black door panel, 72 style, $35 shipped. The arm rest is good too. Comes with the gromets for hand crank/door latch. I also have the door latch and window crank. Driver condition, $7.50 shipped.SOLD The window regulator was working nice and smooth, the rollers can be replaced (they work ok), LMC sells them separate. Comes with the screws. $20.00 shipped.SOLD The door handle latch control is $12.00 shipped. Last but not least, the blazer door specific hardware pieces. Those little metal pieces that go in the jams and the plastic piece that is at the top of the vent window. I can get the reinforcement plate from the latch also, but I haven't drilled it out yet. I also have the rear glass run for the blazer style, but it has some wear on it and is cracked where the holding screw goes through. If the buyer wants it, I'll include it for an extra $2.00 to help cover shipping. This lot is SOLD. Thanks Rick __________________ If no one knows what you're doing, they can't tell you you're doing it wrong HG's Dream Car Build - Shelby Cobra Kit Build your own adjustable track bar 71 Long Fleet C/10 72 Jimmy 4x4 (Junkyard Jimmy) HG's Plow Truck '78 K35 Dually Bigass Farm Truck HG's thread of miscellaneous stuff Last edited by hgs_notes; 08-21-2007 at 01:12 AM.

07-27-2007, 11:00 PM	#3
hgs_notes GEARHEAD Join Date: Aug 2003 Location: MN Posts: 6,125	Re: 72 Jimmy/Blazer passenger door parts My list of wants runs long and wide...j/k. There isn't much I'm looking for right now. I could use an HEI distributor cap with coil, spreadbore 4 barrel carb (rebuildable stocker is fine), I need an alternator (preferably internal regulated) a single rear seat hold down clamp (I'm missing one), rear seat seat belts (black or white), 14" chrome air cleaner, and there are some johnny lightning blazers I'd like to add to my collection. That's about it. Realistically, I'd rather get the $20.00. __________________ If no one knows what you're doing, they can't tell you you're doing it wrong HG's Dream Car Build - Shelby Cobra Kit Build your own adjustable track bar 71 Long Fleet C/10 72 Jimmy 4x4 (Junkyard Jimmy) HG's Plow Truck '78 K35 Dually Bigass Farm Truck HG's thread of miscellaneous stuff

07-28-2007, 11:53 AM	#4
6t727t2 Active Member Join Date: Dec 2004 Location: NJ Posts: 6,428	Re: 72 Jimmy/Blazer passenger door parts Next in line for the door specific lot.

07-28-2007, 02:51 PM	#5
hgs_notes GEARHEAD Join Date: Aug 2003 Location: MN Posts: 6,125	Re: 72 Jimmy/Blazer passenger door parts RicksTrucks, please respond if you are still interested or not, so I can move on this. Also, for anyone interested, I have the door glass I'll let go for the shipping cost. __________________ If no one knows what you're doing, they can't tell you you're doing it wrong HG's Dream Car Build - Shelby Cobra Kit Build your own adjustable track bar 71 Long Fleet C/10 72 Jimmy 4x4 (Junkyard Jimmy) HG's Plow Truck '78 K35 Dually Bigass Farm Truck HG's thread of miscellaneous stuff

07-28-2007, 05:26 PM	#6
RicksTrucks Senior Member Join Date: Jan 2005 Location: Claremore, OK 74017 Posts: 2,640	Re: 72 Jimmy/Blazer passenger door parts I will take it and please include the reinforcement plate for the latch. PM me how you want payment. __________________ 68 Short Stepside C-10 69 SWB C-10 70 Flatbed C-20 70 LWB C-20 BB402 70 LWB C-10 CST 70 LWB C-10 CST 71 Short Stepside Cheyenne C-10 72 LWB C-10 72 Blazer 4x4 4spd 95 Jeep Cherokee 4x4

07-29-2007, 07:38 PM	#7
hgs_notes GEARHEAD Join Date: Aug 2003 Location: MN Posts: 6,125	Re: 72 Jimmy/Blazer passenger door parts RicksTrucks is taking the blazer specific stuff, thank you. Any interest in the other door parts? The panel is real good, just a little dirty. I guess I should have cleaned it up before I took the picture, anyway... __________________ If no one knows what you're doing, they can't tell you you're doing it wrong HG's Dream Car Build - Shelby Cobra Kit Build your own adjustable track bar 71 Long Fleet C/10 72 Jimmy 4x4 (Junkyard Jimmy) HG's Plow Truck '78 K35 Dually Bigass Farm Truck HG's thread of miscellaneous stuff

07-29-2007, 09:05 PM	#8
RicksTrucks Senior Member Join Date: Jan 2005 Location: Claremore, OK 74017 Posts: 2,640	Re: 72 Jimmy/Blazer passenger door parts PayPal made for Blazer specific parts and the rear glass run for the blazer style __________________ 68 Short Stepside C-10 69 SWB C-10 70 Flatbed C-20 70 LWB C-20 BB402 70 LWB C-10 CST 70 LWB C-10 CST 71 Short Stepside Cheyenne C-10 72 LWB C-10 72 Blazer 4x4 4spd 95 Jeep Cherokee 4x4

07-30-2007, 03:52 PM	#9
hgs_notes GEARHEAD Join Date: Aug 2003 Location: MN Posts: 6,125	Re: 72 Jimmy/Blazer passenger door parts door panel, latch, regulator still available. __________________ If no one knows what you're doing, they can't tell you you're doing it wrong HG's Dream Car Build - Shelby Cobra Kit Build your own adjustable track bar 71 Long Fleet C/10 72 Jimmy 4x4 (Junkyard Jimmy) HG's Plow Truck '78 K35 Dually Bigass Farm Truck HG's thread of miscellaneous stuff



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.