parting out... '69 GMC LWB 6cyl P/S P/Glide - The 1947 - Present Chevrolet & GMC Truck Message Board Network

**67 cst swb** · 07-29-2007, 04:28 PM

I got this truck for the posi rearend... keeping for me.
***edit- Not a posi, DANG-IT!!!***
So, if anything is needed, let me know (post in thread please)
I'm not greatly knowledgeable on the 6cyl (250 I assume) with P/S brackets and stuff. So, let me know if this stuff looks right or not when I post pics. All the Powerglide stuff is complete... column, linkage, tranny, etc... GMC grille is damaged (can get pictures if needed) headlight bezels look ok (only glanced)
Prefer selling the smaller stuff, due to shipping and time it will take to pull the larger items.
I have this truck at my work (place to strip items) then will be getting it to my storage yards 15 miles away, So, if something is needed post here...ASAP.
As for prices, not sure what they are worth so, lets say,... somewhere between $10.00 and $100.00 but, all prices will be negotiable (unless lots of labor involved).
there,... prices given. I can't think of anything I'd ask more than $100.00 for that someone would wanna pay shipping on anyway.
All parts are PLUS SHIPPING...
Also,... all parts can be pressure washed and/or hot tank dipped for EXTRA $5.00/order...(except larger items,ie... motor, trans, etc...

LooseCannon · 07-29-2007, 04:46 PM

I'm interested in the balancer, water pump, and alternator pulleys, shipped to 17007. Thanks.

nplocoman · 07-29-2007, 04:57 PM

Interested in the transmission linkage and column

68,69 K20 · 07-29-2007, 06:36 PM

Interested in exhaust manifold if it's good.

buffle · 07-29-2007, 08:08 PM

Would be interested in that can of ps pieces. Have brackets pump and sector could really use some of that original hardware.

mosesgt · 07-29-2007, 10:38 PM

Head light bezels pse. Zip: 39560
my email is:
mosesgt@hughes.net

xshadow · 07-29-2007, 10:48 PM

I'm interested in a wiring harness.

da-burb · 07-29-2007, 10:57 PM

Power steering items for me please. 55363 is my zip.

scrapmetalart · 07-29-2007, 11:49 PM

I need a fan off that engine & an exhaust manifold if you have another.
Dayton Ohio 45402... THANKS!

ol yellow 72 · 07-30-2007, 12:41 AM

i need the couriour bearing support pending the design of it, i need the one for the horse shoe shape bearing

**67 cst swb** · 08-02-2007, 10:54 PM

OK, here's the plan...
Got the truck to the shop Friday night (8-3)... Then Saturday afternoon and evening will be getting pictures and teardown.

Loosecannon- balancer, water pump, and alternator pulleys, shipped to 17007

nplocoman- transmission linkage and column

68,69 K20- exhaust manifold

buffle- can of ps pieces (would like to sell as complete system first, I'll check for extra's or if not sold as complete)

mosesgt- Head light bezels pse. Zip: 39560

xshadow- wiring harness

da-burb- Power steering items for me please. 55363

scrapemetalart- fan & exhaust manifold if have another Dayton Ohio 45402

ol yellow 72- couriour bearing support pending the design

--------------------------------------------------------------

I'll be checking on these items and replying on Sat. evening...

Anyone else...?

**67 cst swb** · 08-04-2007, 04:16 PM

nplocoman- transmission linkage and column
How about $75.00 w/o trans, $150.00 with trans? + shipping (or don't you have someone in my area soon?)

**67 cst swb** · 08-04-2007, 05:01 PM

Loosecannon- balancer, water pump, and alternator pulleys, shipped to 17007

I have a single belt balancer, single groove pulley, and single alt pully... How about $10.00 + shipping?
all this is extra over the double puley stuff for P/S assy.
what are you looking for?

LooseCannon · 08-04-2007, 08:12 PM

Quote:

Originally Posted by 67 cst swb

Loosecannon- balancer, water pump, and alternator pulleys, shipped to 17007

I have a single belt balancer, single groove pulley, and single alt pully... How about $10.00 + shipping?
all this is extra over the double puley stuff for P/S assy.
what are you looking for?

I'm looking for the double groove pulleys to be used with P/S. My hay hauler currently has the single groove and I'm gathering stuff for a P/S conversion. Thanks.

LooseCannon · 08-06-2007, 12:10 PM

Quote:

Originally Posted by LooseCannon

I'm looking for the double groove pulleys to be used with P/S. My hay hauler currently has the single groove and I'm gathering stuff for a P/S conversion. Thanks.

Any update on the double groove pulleys? Thanks.

LooseCannon · 08-09-2007, 11:40 PM

Quote:

Originally Posted by LooseCannon

Any update on the double groove pulleys? Thanks.

ttt

**67 cst swb** · 08-04-2007, 05:02 PM

68,69 K20- exhaust manifold

How about $50.00 + shipping?
there is 2 exhuast manifolds... 1 on motor and 1 in bed on motor that was taken out. the one in bed is broken. the one on motor looks good.

**67 cst swb** · 08-04-2007, 05:04 PM

mosesgt- Head light bezels pse. Zip: 39560
How about $40.00 + shipping?

**67 cst swb** · 08-04-2007, 05:05 PM

xshadow- wiring harness

tail light harness complete Firewall to tail light connectors... If it broke or patched, we'll talk about whether you still want or not, or still get it for less $.

How about $25.00 + shipping... (if solid 1 piece OE no breaks or splices)

**67 cst swb** · 08-07-2007, 06:42 PM

corn - wiring harness

tail light harness... If it broke or patched, we'll talk about whether you still want or not, or still get it for less $.

How about $25.00 + shipping...including Left tail light assy (if solid 1 piece OE no breaks or splices)[/QUOTE]

**67 cst swb** · 08-04-2007, 05:07 PM

da-burb- Power steering items for me please. 55363

How about $75.00 + shipping?

all in below pic, plus the double pulleys for crank, W/P, and Alt... unless not needed, then will sell separate... LMK...

**67 cst swb** · 08-04-2007, 05:09 PM

scrapemetalart- fan & exhaust manifold if have another Dayton Ohio 45402

only have 1 good exhaust manifold... Sorry
But fan (have 2 look good)

Fan (either one, your choice) $5.00 + shipping

**67 cst swb** · 08-04-2007, 05:10 PM

ol yellow 72- couriour bearing support pending the design

**67 cst swb** · 08-04-2007, 05:12 PM

buffle- can of ps pieces
(would like to sell as complete system first, I'll check for extra's or if not sold as complete)
There was not as many pieces as I had thought laying around... looks like I only have 1 motors worth of P/S stuff...
There was a screwy looking (looks like carb linkage bracket thingy) in the can that must have thrown me on the initial visual of the stuff.
Sorry...

**ScottH** · 08-04-2007, 06:03 PM

door the door panels have holes for arm rests?

Thanks.

Scott

07-29-2007, 04:28 PM	#1
67 cst swb Senior Member Join Date: Nov 2001 Location: Rapid City, SD Posts: 2,281	parting out... '69 GMC LWB 6cyl P/S P/Glide I got this truck for the posi rearend... keeping for me. *edit- Not a posi, DANG-IT!!!* So, if anything is needed, let me know (post in thread please) I'm not greatly knowledgeable on the 6cyl (250 I assume) with P/S brackets and stuff. So, let me know if this stuff looks right or not when I post pics. All the Powerglide stuff is complete... column, linkage, tranny, etc... GMC grille is damaged (can get pictures if needed) headlight bezels look ok (only glanced) Prefer selling the smaller stuff, due to shipping and time it will take to pull the larger items. I have this truck at my work (place to strip items) then will be getting it to my storage yards 15 miles away, So, if something is needed post here...ASAP. As for prices, not sure what they are worth so, lets say,... somewhere between $10.00 and $100.00 but, all prices will be negotiable (unless lots of labor involved). *there,... prices given.* I can't think of anything I'd ask more than $100.00 for that someone would wanna pay shipping on anyway. *All parts are PLUS SHIPPING...* Also,... all parts can be pressure washed and/or hot tank dipped for EXTRA $5.00/order...(except larger items,ie... motor, trans, etc... __________________ My Trucks: 1967 Chevrolet Short Wide Box 327 TH350 9" w/3.90 gears paint will be White - Current Project 1967 Chevrolet Custom LWB 283 TH400 3.73 Posi, no-AC, no-PS, no-PB, bench-seat, small-window - mostly orig driver 1967 Chevrolet CST LWB originally a 327 TH400 3.73 Posi AC PS PB, had Buddy Buckets, Small Window - parts truck 1967 Chevrolet CST LWB, 283 MT 3.73 had Buddy Buckets, Panoramic Window - parts truck 2001 Chevrolet 3500 2WD Crew Cab Dually 8.1L Allison White 2002 Chevrolet 1500HD 4x4 Crew Cab 6.0L 4L80E Red Last edited by 67 cst swb; 08-05-2007 at 02:22 AM.

07-29-2007, 04:46 PM	#2
LooseCannon Registered User Join Date: Mar 2004 Location: Boiling Springs, PA Posts: 391	Re: parting out... '69 GMC LWB 6cyl P/S P/Glide I'm interested in the balancer, water pump, and alternator pulleys, shipped to 17007. Thanks. Last edited by LooseCannon; 07-31-2007 at 10:19 PM.

07-29-2007, 04:57 PM	#3
nplocoman never finish start another Join Date: Mar 2007 Location: North Platte Nebraska Posts: 432	Re: parting out... '69 GMC LWB 6cyl P/S P/Glide Interested in the transmission linkage and column

07-29-2007, 06:36 PM	#4
68,69 K20 They call me the Breeze... Join Date: Jul 2007 Location: New York Posts: 2,251	Re: parting out... '69 GMC LWB 6cyl P/S P/Glide Interested in exhaust manifold if it's good. __________________ Mike 69 K20 "Beer is proof God loves us and wants us to be happy"....Ben Franklin

07-29-2007, 08:08 PM	#5
buffle buffle Join Date: Sep 2004 Location: Independence, Mo Posts: 426	Re: parting out... '69 GMC LWB 6cyl P/S P/Glide Would be interested in that can of ps pieces. Have brackets pump and sector could really use some of that original hardware.

07-29-2007, 10:38 PM	#6
mosesgt Registered User Join Date: Apr 2007 Location: Long Beach, MS Posts: 18	Re: parting out... '69 GMC LWB 6cyl P/S P/Glide Head light bezels pse. Zip: 39560 my email is: mosesgt@hughes.net __________________ #1. -1967 GMC Fleet side, V6, 4 spd, long bed #2. -1970 International 1 ton dually, flat bed with lift gate $550.- price lowered!!! #3. -1979 Chevy 1 ton dually, four door with 8' bed. #4.- 1991 S-10, 4x2, LWB, V-6, auto #5.- 1986 S-10, 4x2, LWB, V-6, Auto #1 is with me in Long Beach, MS 39560 (until Uncle Sam lets me go home in SEP '07)- now NOV '07) Others are at my home in Frazeysburg (near Zanesville), OH 43822 Call after 4 pm (EST) or on weekends! (228) 363-1311 Last edited by mosesgt; 07-29-2007 at 10:39 PM.

07-29-2007, 10:48 PM	#7
xshadow Registered User Join Date: Apr 2006 Location: va Posts: 553	Re: parting out... '69 GMC LWB 6cyl P/S P/Glide I'm interested in a wiring harness.

07-29-2007, 10:57 PM	#8
da-burb "Ochre Ogre" Join Date: Apr 2000 Location: Springfield, MN Posts: 3,558	Re: parting out... '69 GMC LWB 6cyl P/S P/Glide Power steering items for me please. 55363 is my zip. __________________ Bowtie Truck Stop Inc. Mid-West GM Truck Restoration Parts Supplier Your Key Parts, Auto Metal Direct, Dynacorn, and Goodmark dealer. like us @ www.facebook.com/BowtieTruckStop 1971 C-10 Suburban (Ochre) 1971 K-10 Suburban (Ochre) 1972 C-10 Suburban (Ochre) 1972 K-20 Suburban (Yellow- that just aint right!) Springfield, Minnesota 56087

07-29-2007, 11:49 PM	#9
scrapmetalart Junior Member Join Date: Mar 2007 Location: DAYTON Posts: 505	Re: parting out... '69 GMC LWB 6cyl P/S P/Glide I need a fan off that engine & an exhaust manifold if you have another. Dayton Ohio 45402... THANKS! __________________ frontstreetcycle on Instagram

07-30-2007, 12:41 AM	#10
ol yellow 72 Registered User Join Date: Aug 2005 Location: kentucky Posts: 211	Re: parting out... '69 GMC LWB 6cyl P/S P/Glide i need the couriour bearing support pending the design of it, i need the one for the horse shoe shape bearing

08-02-2007, 10:54 PM	#11
67 cst swb Senior Member Join Date: Nov 2001 Location: Rapid City, SD Posts: 2,281	Re: parting out... '69 GMC LWB 6cyl P/S P/Glide OK, here's the plan... Got the truck to the shop Friday night (8-3)... Then Saturday afternoon and evening will be getting pictures and teardown. Loosecannon- balancer, water pump, and alternator pulleys, shipped to 17007 nplocoman- transmission linkage and column 68,69 K20- exhaust manifold buffle- can of ps pieces (would like to sell as complete system first, I'll check for extra's or if not sold as complete) mosesgt- Head light bezels pse. Zip: 39560 xshadow- wiring harness da-burb- Power steering items for me please. 55363 scrapemetalart- fan & exhaust manifold if have another Dayton Ohio 45402 ol yellow 72- couriour bearing support pending the design -------------------------------------------------------------- I'll be checking on these items and replying on Sat. evening... Anyone else...? __________________ My Trucks: 1967 Chevrolet Short Wide Box 327 TH350 9" w/3.90 gears paint will be White - Current Project 1967 Chevrolet Custom LWB 283 TH400 3.73 Posi, no-AC, no-PS, no-PB, bench-seat, small-window - mostly orig driver 1967 Chevrolet CST LWB originally a 327 TH400 3.73 Posi AC PS PB, had Buddy Buckets, Small Window - parts truck 1967 Chevrolet CST LWB, 283 MT 3.73 had Buddy Buckets, Panoramic Window - parts truck 2001 Chevrolet 3500 2WD Crew Cab Dually 8.1L Allison White 2002 Chevrolet 1500HD 4x4 Crew Cab 6.0L 4L80E Red Last edited by 67 cst swb; 08-04-2007 at 12:35 AM.

08-04-2007, 04:16 PM	#12
67 cst swb Senior Member Join Date: Nov 2001 Location: Rapid City, SD Posts: 2,281	Re: parting out... '69 GMC LWB 6cyl P/S P/Glide nplocoman- transmission linkage and column How about $75.00 w/o trans, $150.00 with trans? + shipping (or don't you have someone in my area soon?) __________________ My Trucks: 1967 Chevrolet Short Wide Box 327 TH350 9" w/3.90 gears paint will be White - Current Project 1967 Chevrolet Custom LWB 283 TH400 3.73 Posi, no-AC, no-PS, no-PB, bench-seat, small-window - mostly orig driver 1967 Chevrolet CST LWB originally a 327 TH400 3.73 Posi AC PS PB, had Buddy Buckets, Small Window - parts truck 1967 Chevrolet CST LWB, 283 MT 3.73 had Buddy Buckets, Panoramic Window - parts truck 2001 Chevrolet 3500 2WD Crew Cab Dually 8.1L Allison White 2002 Chevrolet 1500HD 4x4 Crew Cab 6.0L 4L80E Red Last edited by 67 cst swb; 08-04-2007 at 05:17 PM.

08-04-2007, 05:01 PM	#13
67 cst swb Senior Member Join Date: Nov 2001 Location: Rapid City, SD Posts: 2,281	Re: parting out... '69 GMC LWB 6cyl P/S P/Glide Loosecannon- balancer, water pump, and alternator pulleys, shipped to 17007 I have a single belt balancer, single groove pulley, and single alt pully... How about $10.00 + shipping? all this is extra over the double puley stuff for P/S assy. what are you looking for? __________________ My Trucks: 1967 Chevrolet Short Wide Box 327 TH350 9" w/3.90 gears paint will be White - Current Project 1967 Chevrolet Custom LWB 283 TH400 3.73 Posi, no-AC, no-PS, no-PB, bench-seat, small-window - mostly orig driver 1967 Chevrolet CST LWB originally a 327 TH400 3.73 Posi AC PS PB, had Buddy Buckets, Small Window - parts truck 1967 Chevrolet CST LWB, 283 MT 3.73 had Buddy Buckets, Panoramic Window - parts truck 2001 Chevrolet 3500 2WD Crew Cab Dually 8.1L Allison White 2002 Chevrolet 1500HD 4x4 Crew Cab 6.0L 4L80E Red Last edited by 67 cst swb; 08-04-2007 at 05:16 PM.

08-04-2007, 05:02 PM	#17
67 cst swb Senior Member Join Date: Nov 2001 Location: Rapid City, SD Posts: 2,281	Re: parting out... '69 GMC LWB 6cyl P/S P/Glide 68,69 K20- exhaust manifold How about $50.00 + shipping? there is 2 exhuast manifolds... 1 on motor and 1 in bed on motor that was taken out. the one in bed is broken. the one on motor looks good. __________________ My Trucks: 1967 Chevrolet Short Wide Box 327 TH350 9" w/3.90 gears paint will be White - Current Project 1967 Chevrolet Custom LWB 283 TH400 3.73 Posi, no-AC, no-PS, no-PB, bench-seat, small-window - mostly orig driver 1967 Chevrolet CST LWB originally a 327 TH400 3.73 Posi AC PS PB, had Buddy Buckets, Small Window - parts truck 1967 Chevrolet CST LWB, 283 MT 3.73 had Buddy Buckets, Panoramic Window - parts truck 2001 Chevrolet 3500 2WD Crew Cab Dually 8.1L Allison White 2002 Chevrolet 1500HD 4x4 Crew Cab 6.0L 4L80E Red Last edited by 67 cst swb; 08-04-2007 at 05:18 PM.

08-04-2007, 05:04 PM	#18
67 cst swb Senior Member Join Date: Nov 2001 Location: Rapid City, SD Posts: 2,281	Re: parting out... '69 GMC LWB 6cyl P/S P/Glide mosesgt- Head light bezels pse. Zip: 39560 How about $40.00 + shipping? __________________ My Trucks: 1967 Chevrolet Short Wide Box 327 TH350 9" w/3.90 gears paint will be White - Current Project 1967 Chevrolet Custom LWB 283 TH400 3.73 Posi, no-AC, no-PS, no-PB, bench-seat, small-window - mostly orig driver 1967 Chevrolet CST LWB originally a 327 TH400 3.73 Posi AC PS PB, had Buddy Buckets, Small Window - parts truck 1967 Chevrolet CST LWB, 283 MT 3.73 had Buddy Buckets, Panoramic Window - parts truck 2001 Chevrolet 3500 2WD Crew Cab Dually 8.1L Allison White 2002 Chevrolet 1500HD 4x4 Crew Cab 6.0L 4L80E Red Last edited by 67 cst swb; 08-04-2007 at 05:19 PM.



Register or Log In To remove these advertisements.

08-04-2007, 05:05 PM	#19
67 cst swb Senior Member Join Date: Nov 2001 Location: Rapid City, SD Posts: 2,281	Re: parting out... '69 GMC LWB 6cyl P/S P/Glide xshadow- wiring harness tail light harness complete Firewall to tail light connectors... If it broke or patched, we'll talk about whether you still want or not, or still get it for less $. How about $25.00 + shipping... (if solid 1 piece OE no breaks or splices) __________________ My Trucks: 1967 Chevrolet Short Wide Box 327 TH350 9" w/3.90 gears paint will be White - Current Project 1967 Chevrolet Custom LWB 283 TH400 3.73 Posi, no-AC, no-PS, no-PB, bench-seat, small-window - mostly orig driver 1967 Chevrolet CST LWB originally a 327 TH400 3.73 Posi AC PS PB, had Buddy Buckets, Small Window - parts truck 1967 Chevrolet CST LWB, 283 MT 3.73 had Buddy Buckets, Panoramic Window - parts truck 2001 Chevrolet 3500 2WD Crew Cab Dually 8.1L Allison White 2002 Chevrolet 1500HD 4x4 Crew Cab 6.0L 4L80E Red Last edited by 67 cst swb; 08-05-2007 at 02:02 AM.

08-07-2007, 06:42 PM	#20
67 cst swb Senior Member Join Date: Nov 2001 Location: Rapid City, SD Posts: 2,281	Re: parting out... '69 GMC LWB 6cyl P/S P/Glide corn - wiring harness tail light harness... If it broke or patched, we'll talk about whether you still want or not, or still get it for less $. How about $25.00 + shipping...including Left tail light assy (if solid 1 piece OE no breaks or splices)[/QUOTE] __________________ My Trucks: 1967 Chevrolet Short Wide Box 327 TH350 9" w/3.90 gears paint will be White - Current Project 1967 Chevrolet Custom LWB 283 TH400 3.73 Posi, no-AC, no-PS, no-PB, bench-seat, small-window - mostly orig driver 1967 Chevrolet CST LWB originally a 327 TH400 3.73 Posi AC PS PB, had Buddy Buckets, Small Window - parts truck 1967 Chevrolet CST LWB, 283 MT 3.73 had Buddy Buckets, Panoramic Window - parts truck 2001 Chevrolet 3500 2WD Crew Cab Dually 8.1L Allison White 2002 Chevrolet 1500HD 4x4 Crew Cab 6.0L 4L80E Red Last edited by 67 cst swb; 08-07-2007 at 06:47 PM.

08-04-2007, 05:07 PM	#21
67 cst swb Senior Member Join Date: Nov 2001 Location: Rapid City, SD Posts: 2,281	Re: parting out... '69 GMC LWB 6cyl P/S P/Glide da-burb- Power steering items for me please. 55363 How about $75.00 + shipping? all in below pic, plus the double pulleys for crank, W/P, and Alt... unless not needed, then will sell separate... LMK... __________________ My Trucks: 1967 Chevrolet Short Wide Box 327 TH350 9" w/3.90 gears paint will be White - Current Project 1967 Chevrolet Custom LWB 283 TH400 3.73 Posi, no-AC, no-PS, no-PB, bench-seat, small-window - mostly orig driver 1967 Chevrolet CST LWB originally a 327 TH400 3.73 Posi AC PS PB, had Buddy Buckets, Small Window - parts truck 1967 Chevrolet CST LWB, 283 MT 3.73 had Buddy Buckets, Panoramic Window - parts truck 2001 Chevrolet 3500 2WD Crew Cab Dually 8.1L Allison White 2002 Chevrolet 1500HD 4x4 Crew Cab 6.0L 4L80E Red Last edited by 67 cst swb; 08-04-2007 at 05:21 PM.

08-04-2007, 05:09 PM	#22
67 cst swb Senior Member Join Date: Nov 2001 Location: Rapid City, SD Posts: 2,281	Re: parting out... '69 GMC LWB 6cyl P/S P/Glide scrapemetalart- fan & exhaust manifold if have another Dayton Ohio 45402 only have 1 good exhaust manifold... Sorry But fan (have 2 look good) Fan (either one, your choice) $5.00 + shipping __________________ My Trucks: 1967 Chevrolet Short Wide Box 327 TH350 9" w/3.90 gears paint will be White - Current Project 1967 Chevrolet Custom LWB 283 TH400 3.73 Posi, no-AC, no-PS, no-PB, bench-seat, small-window - mostly orig driver 1967 Chevrolet CST LWB originally a 327 TH400 3.73 Posi AC PS PB, had Buddy Buckets, Small Window - parts truck 1967 Chevrolet CST LWB, 283 MT 3.73 had Buddy Buckets, Panoramic Window - parts truck 2001 Chevrolet 3500 2WD Crew Cab Dually 8.1L Allison White 2002 Chevrolet 1500HD 4x4 Crew Cab 6.0L 4L80E Red Last edited by 67 cst swb; 08-04-2007 at 05:22 PM.

08-04-2007, 05:10 PM	#23
67 cst swb Senior Member Join Date: Nov 2001 Location: Rapid City, SD Posts: 2,281	Re: parting out... '69 GMC LWB 6cyl P/S P/Glide ol yellow 72- couriour bearing support pending the design __________________ My Trucks: 1967 Chevrolet Short Wide Box 327 TH350 9" w/3.90 gears paint will be White - Current Project 1967 Chevrolet Custom LWB 283 TH400 3.73 Posi, no-AC, no-PS, no-PB, bench-seat, small-window - mostly orig driver 1967 Chevrolet CST LWB originally a 327 TH400 3.73 Posi AC PS PB, had Buddy Buckets, Small Window - parts truck 1967 Chevrolet CST LWB, 283 MT 3.73 had Buddy Buckets, Panoramic Window - parts truck 2001 Chevrolet 3500 2WD Crew Cab Dually 8.1L Allison White 2002 Chevrolet 1500HD 4x4 Crew Cab 6.0L 4L80E Red Last edited by 67 cst swb; 08-04-2007 at 07:09 PM.

08-04-2007, 05:12 PM	#24
67 cst swb Senior Member Join Date: Nov 2001 Location: Rapid City, SD Posts: 2,281	Re: parting out... '69 GMC LWB 6cyl P/S P/Glide buffle- can of ps pieces (would like to sell as complete system first, I'll check for extra's or if not sold as complete) There was not as many pieces as I had thought laying around... looks like I only have 1 motors worth of P/S stuff... There was a screwy looking (looks like carb linkage bracket thingy) in the can that must have thrown me on the initial visual of the stuff. Sorry... __________________ My Trucks: 1967 Chevrolet Short Wide Box 327 TH350 9" w/3.90 gears paint will be White - Current Project 1967 Chevrolet Custom LWB 283 TH400 3.73 Posi, no-AC, no-PS, no-PB, bench-seat, small-window - mostly orig driver 1967 Chevrolet CST LWB originally a 327 TH400 3.73 Posi AC PS PB, had Buddy Buckets, Small Window - parts truck 1967 Chevrolet CST LWB, 283 MT 3.73 had Buddy Buckets, Panoramic Window - parts truck 2001 Chevrolet 3500 2WD Crew Cab Dually 8.1L Allison White 2002 Chevrolet 1500HD 4x4 Crew Cab 6.0L 4L80E Red

08-04-2007, 06:03 PM	#25
ScottH Senior Member Join Date: Sep 2002 Location: Hampstead, NC Posts: 8,187	Re: parting out... '69 GMC LWB 6cyl P/S P/Glide door the door panels have holes for arm rests? Thanks. Scott __________________ 1963 C10 swb fleetside 1966 GMC G1000 Handi-bus (future project) 1955 Chevy 2 dr. wagon

Register or Log In To remove these advertisements.